commit d771020 "don't build tests unless make check is run" has made the
--{en,dis}able-tests switch completely useless. The differentiation is
now made by running "make check" or not doing so. The only effect of
the switch is an "empty" excursion of make into the tests/ directory.
(well, and it turns "make check" useless from the main directory if
--disable-tests is given, which I don't think makes sense either)
Acked-by: Greg Troxel <gdt@ir.bbn.com>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
libexecinfo is used to provide backtrace() on *BSD. The API is
compatible with glibc's, so this is a "free" improvement.
To improve configure behaviour, the following configure options are
modified/introduced:
* --enable-gcc-rdynamic now defaults to "on" if the compiler is gcc.
(I sadly wasn't able to find any documentation on the availability of
this option for llvm, even though at least the version I have
installed does support it)
* --enable-backtrace has been added. This behaves as off/auto/on
switch, i.e. giving either {dis,en}able will result in the requested
behaviour (or an error if support wasn't found)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This command allows the user to change to default reference bandwidth
for cost calculations. The default value is 100 Mbps. With a default
bandwidth of 10 MBps, the default cost becomes 10. Those values are
consistent with OSPFv2.
[DL: resolved conflicts in vty command additions & docs]
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Previously, the interface cost was a fixed default value that a user
was allowed to change with "ipv6 ospf6 cost XX". As what is done with
OSPFv2, we change this behaviour to compute the default interface cost
from the interface bandwidth.
The user can still force a cost with "ipv6 ospf6 cost XX". He can get
the default value with "no ipv6 ospf6 cost". Moreover, the default
cost value was 1. The cost is now computed from the bandwidth and a
default reference bandwidth of 100 MBps (as for OSPFv2). Since the
default bandwidth for an interface is 10 MBps, the "default" cost
becomes 10 instead of 1.
[DL: resolved conflict in ospf6d/ospf6_interface.c]
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Signed-off-by: Dinesh G Dutt <ddutt at cumulusnetworks.com>
Signed-off-by: Ayan Banerjee <ayabaner at gmail.com>
Reviewed-by: Scott Feldman <sfeldma at cumulusnetworks.com>
Reviewed-by: James Li <jli at cumulusnetworks.com>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
OSPV3 SPF triggers on every SPF-able event instead of using timers the way
OSPFv2 does. This patch makes SPF be triggered/throttled similar to OSPFv2.
It adds a command to quagga identical to the OSPFv2 equivalent to configure
these timers.
Summary:
Signed-off-by: Dinesh Dutt <ddutt at cumulusnetworks.com>
Reviewed-by: Scott Feldman <sfeldma at cumulusnetworks.com>
[DL: removed reference to oa->ts_spf for rebase]
[DL: killed timeval_subtract]
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
commit 4afa50b added few lines that are syntactically incorrect
with leading plus sign.
Cc: Denis Ovsienko <infrastation@yandex.ru>
Signed-off-by: Timo Teräs <timo.teras@iki.fi>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
so net.core.rmem_max must not be adjusted. Requires
linux kernel >= 2.6.14, falls back to SO_RCVBUF on error
Signed-off-by: Ulrich Weber <ulrich.weber@sophos.com>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
in particular,
- add IS-IS to some listings
- list Solaris & OSX as "some work required"
- remove OS version numbers. We have no base to specify any of them.
- list supported C compilers (gcc, clang, icc)
- cut the Quagga 2.0 stuff that promises QoS and firewall functionality
Update documentation with some text on the zebra interface to the
optional Forwarding Path Manager component, and the related cli
commands.
Signed-off-by: Avneesh Sachdev <avneesh@opensourcerouting.org>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
configure parameters have changed quite a bit, several options are
enabled by default now and there's --disable-tests. Update
documentation to match.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This is the functionality described in Appendix C of RFC 6126. Its
main purpose is to avoid keeping a full source table, which makes it
possible to implement a subset of Babel in just a few hundred lines of
code. However, in Quagga the code for maintaining the source table is
already there, and a parasitic implementation can be simulated using
filtering -- so it makes little sense to keep the functionality.
The primary focus of this commit is to make "show running-config"
command display more current configuration, including some of the bits
previously seen in the output of "show babel running-config". Besides
that, the following commands were renamed for consistency with the
syntax of other components:
"debug *" to "debug babel *" (and moved to top level)
"show babel running-config" to "show babel parameters"
* babel_interface.c
* show_babel_running_config(): rename to show_babel_parameters(),
update syntax pattern, don't call show_babeld_configuration()
* babel_if_init(): update respectively
* babel_enable_if_config_write(): new VTY helper for static
babel_enable_if
* babel_interface.h: add extern declaration
* babel_main.c: unset all debug options by default
* show_babel_main_configuration(): remove debug options decoder
* babel_zebra.c
* babel_debug(): rename to debug_babel(), update syntax pattern
* no_babel_debug(): rename to no_debug_babel(), update syntax pattern
* babelz_zebra_init(): update respectively
* debug_babel_config_write() new VTY helper for static debug_type
* babel_zebra.h: add extern declaration
* babeld.c
* babel_config_write(): add the code to output "debug babel *",
"router babel", "redistribute *" and "network *" statements
* show_babeld_configuration(): dismiss
* babeld.h: remove extern declaration
* babeld.texi: update for renamed commands
* babeld.conf.sample: idem, add debug statements block
ipv6 nd ra-interval
ipv6 nd ra-lifetime
ipv6 nd reachable-time
ipv6 nd home-agent-preference
ipv6 nd home-agent-lifetime
ipv6 nd router-preference
Calls to atoi() and atol() are replaced with VTY_GET_INTEGER_RANGE()
macro, command patterns are clarified and aliases of some commands
are added for consistency. Other changes are listed below.
* zebra/rtadv.c
* ipv6_nd_ra_interval_msec(): resolve -Wsign-compare
* ipv6_nd_ra_interval(): idem
* rtadv_init(): update to list new aliases
* doc/ipv6.texi: update to match current implementation
This implements a new "ipv6 nd mtu <1-65535>" interface-level command.
* doc/ipv6.texi: add description
* zebra/rtadv.c
* rtadv_send_packet(): send option type 5, when configured
* ipv6_nd_mtu(): new VTY helper
* no_ipv6_nd_mtu(): ditto
* rtadv_config_write(): add new option
* rtadv_init(): list new helpers
* draft-ietf-idr-as-pathlimit doesn't seem to have gone anywhere, and its
author does not think it will make progress in IDR. Remove all support
introduced for it, but leave stubs for the commands to avoid breaking
any configurations.
Basically reverts cecab5e9725792e60a5e4b473e238a14cd85815d.
The man page for zebra(8) mentions as port number to connect to 2602,
but it's acutally 2601 (as shown in /etc/services). 2602 belongs to ripd.
Attached patch fixes this typo.
Some uses of GNU make extensions were not necessary. There are still some,
but they might exist as workarounds for older versions of autoconf that have
since been solved.
Lesson learned: implicit target rules have opposite order to pattern target
rules.
