Back when I put this together in 2015, ISO C11 was still reasonably new
and we couldn't require it just yet. Without ISO C11, there is no
"good" way (only bad hacks) to require a semicolon after a macro that
ends with a function definition. And if you added one anyway, you'd get
"spurious semicolon" warnings on some compilers...
With C11, `_Static_assert()` at the end of a macro will make it so that
the semicolon is properly required, consumed, and not warned about.
Consistently requiring semicolons after "file-level" macros matches
Linux kernel coding style and helps some editors against mis-syntax'ing
these macros.
Signed-off-by: David Lamparter <equinox@diac24.net>
CR, NL and CRNL are all OK, but CRNL shouldn't get treated as 2
newlines (which causes an empty command to be executed => empty prompt
line.)
Signed-off-by: David Lamparter <equinox@diac24.net>
The FDs are in struct vty, and there's ->fd and ->wfd, which shouldn't
be confused. Passing vty_sock along separately just creates mixups.
Signed-off-by: David Lamparter <equinox@diac24.net>
The logging code writes log messages with a `\n` line ending, meanwhile
the VTY code switches it so you need `\r\n`...
And we don't flush the newline after executing a command either.
After this patch, starting daemons like `zebra/zebra -t` should provide
a nice development/debugging experience with a VTY open right there on
stdio and `log stdout` interspersed.
(This is already documented in the man pages, it just looked like sh*t
previously since the log messages didn't newline correctly.)
Signed-off-by: David Lamparter <equinox@diac24.net>
The return from sockunion2hostprefix tells us if the conversion
succeeded or not. There are places in the code where we
always assume that it just `works`, since it can fail
notice and try to do the right thing.
Please note that failure of this function for most cases
of sockunion2hostprefix is highly highly unlikely as that
the sockunion was already created and tested elsewhere
it's just that this function can fail.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The Solaris code has gone through a deprecation cycle. No-one
has said anything to us and worse of all we don't have any test
systems running Solaris to know if we are making changes that
are breaking on Solaris. Remove it from the system so
we can clean up a bit.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
* use actual error code instead of "false"
* add missing new line
Before:
```
nfware# show interface | include (a]
% Regex compilation error: Success% Bad regexp '(a]'
% Unknown command: show interface | include (a]
```
After:
```
nfware# show interface | include (a]
% Regex compilation error: Unmatched ( or \(
% Bad regexp '(a]'
% Unknown command: show interface | include (a]
```
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
When using the default CLI mode, the northbound layer needs to create
a separate transaction to process each YANG-modeled command since
they are supposed to be applied immediately (there's no candidate
configuration nor the "commit" command like in the transactional
CLI). The problem is that configuration transactions have an overhead
associated to them, in big part because of the use of some heavy
libyang functions like `lyd_validate()` and `lyd_diff()`. As of
now this overhead is substantial and doesn't scale well when large
numbers of transactions need to be performed in sequence.
As an example, loading 50k prefix-lists using a single transaction
takes about 2 seconds on a modern CPU. Loading the same 50k
prefix-lists using 50k transactions can take more than an hour
to complete (which is unacceptable by any standard). To fix this
problem, some heavy optimization work needs to be done on libyang and
on the FRR northbound itself too (e.g. perform partial configuration
diffs whenever possible). This, however, should be a long term
effort since these optimizations shouldn't be trivial to implement
and we're far from having the performance numbers we need.
In the meanwhile, this commit introduces a simple but efficient
workaround to alleviate the issue. In short, a new back-off timer
was introduced in the CLI to monitor and detect when too many
YANG-modeled commands are being received at the same time. When
a certain threshold is reached (100 YANG-modeled commands within
one second), the northbound starts to group all subsequent commands
into a single large transaction, which allows them to be processed
much faster (e.g. seconds and not hours). It's essentially a
protection mechanism that creates dynamically-sized transactions
when necessary to prevent performance issues from happening. This
mechanism is enabled both when parsing configuration files and when
reading commands from a terminal.
The downside of this optimization is that, if several YANG-modeled
commands are grouped into the same transaction and at least one of
them fails, the whole transaction is rejected. This is undesirable
since users don't expect transactional behavior when that's not
enabled explicitly. To minimize this issue, the CLI will log all
commands that were rejected whenever that happens, to make the
user aware of what happened and have enough information to fix
the problem. Commands that fail due to parsing errors or CLI-level
validations in general are rejected separately.
Again, this proposed workaround is intended to be temporary. The
goal is to provided a quick fix to issues like #6658 while we work
on better long-term solutions.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Remove mid-string line breaks, cf. workflow doc:
.. [#tool_style_conflicts] For example, lines over 80 characters are allowed
for text strings to make it possible to search the code for them: please
see `Linux kernel style (breaking long lines and strings)
<https://www.kernel.org/doc/html/v4.10/process/coding-style.html#breaking-long-lines-and-strings>`_
and `Issue #1794 <https://github.com/FRRouting/frr/issues/1794>`_.
Scripted commit, idempotent to running:
```
python3 tools/stringmangle.py --unwrap `git ls-files | egrep '\.[ch]$'`
```
Signed-off-by: David Lamparter <equinox@diac24.net>
Instead of returning only error codes (e.g. NB_ERR_VALIDATION)
to the northbound clients, do better than that and also return
a human-readable error message. This should make FRR more
automation-friendly since operators won't need to dig into system
logs to find out what went wrong in the case of an error.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
The new northbound context structure contains information about
the client performing a configuration transaction. This information
will be made available to all configuration callbacks through the
args->context parameter.
The usefulness of this structure comes from the fact that it can be
used as a communication channel (both input and output) between the
northbound callbacks and the northbound clients. This can be done
through its "client_data" field which contains client-specific data.
This should cover some very specific scenarios where a northbound
callback should perform an action only if the configuration change
is coming from a given client. An example would be sending a PCEP
response to a PCE when an SR-TE policy is created or modified
through the PCEP northbound client (for that to happen, the
northbound callbacks need to have access to the PCEP request ID,
which needs to be available).
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Replace sprintf with snprintf where straightforward to do so.
- sprintf's into local scope buffers of known size are replaced with the
equivalent snprintf call
- snprintf's into local scope buffers of known size that use the buffer
size expression now use sizeof(buffer)
- sprintf(buf + strlen(buf), ...) replaced with snprintf() into temp
buffer followed by strlcat
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Rather than doing a f*gly hack for the RPKI code, let's do an on-exit
hook in cmd_node. Also allows replacing some special-casing in the vty
code.
Signed-off-by: David Lamparter <equinox@diac24.net>
And again for the name. Why on earth would we centralize this, just so
people can forget to update it?
Signed-off-by: David Lamparter <equinox@diac24.net>
Same as before, instead of shoving this into a big central list we can
just put the parent node in cmd_node.
Signed-off-by: David Lamparter <equinox@diac24.net>
There is really no reason to not put this in the cmd_node.
And while we're add it, rename from pointless ".func" to ".config_write".
[v2: fix forgotten ldpd config_write]
Signed-off-by: David Lamparter <equinox@diac24.net>
The only nodes that have this as 0 don't have a "->func" anyway, so the
entire thing is really just pointless.
Signed-off-by: David Lamparter <equinox@diac24.net>
RCA:
when client is killed, show running-config command crashes vtysh.
vtysh_client_config function temporarily makes vty->of which is standard output file
pointer to null inorder to suppress output to user.
This call further tries to communicate with each client and when the client
is terminated, socket call fails and hits the exception path to print the
connection has failed using vty_out.
vty_out crashes because vtysh_client_config has temporarily made vty->of
pointer to NULL to supress o/p to user.
Fix:
vty_out function should check for the sanity of vty->of pointer.
If it doesn't exist, this must have hit exception path, so use the
vty->saved_of if exists.
Signed-off-by: Saravanan K <saravanank@vmware.com>
The `--enable-pcreposix` configure option was not actually compiling
properly. Follow pre-existing pattern for inclusion of regex.h
or the pcreposix.h header.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Load the startup configuration directly into the CLI shared candidate
configuration instead of loading it into a private candidate
configuration. This way we don't need to initialize the shared
candidate separately later as a copy of the running configuration,
which is a potentially expensive operation.
Also, make the northbound process SIGHUP correctly even when --tcli
is not used.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Adding a lock to protect the global running configuration doesn't
help much since the FRR daemons are not prepared to process
configuration changes in a pthread that is not the main one (a
whole lot of new protections would be necessary to prevent race
conditions).
This means the lock added by commit 83981138 only adds more
complexity for no benefit. Remove it now to simplify the code.
All northbound clients, including the gRPC one, should either run
in the main pthread or use synchronization primitives to process
configuration transactions in the main pthread.
This reverts commit 83981138fe.
The FRR community has run into an issue where keeping up our
CI system to work with solaris has become a fairly large burden.
We have also sent emails and asked around and have not found
anyone standing up saying that they are using Solaris.
Given the fact that we do not have any comprehensive testing
being done w/ solaris and the fact that we are getting a steady
stream of new features that will never work on solaris and
we cannot find anyone to say that they are using it. Let's
start the drawn out process of deprecating the code.
If in the mean-time someone comes forward with the fact that
they are using it we can then not deprecate it.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The correct cast for these is (unsigned char), because "char" could be
signed and thus have some negative value. isalpha & co. expect an int
arg that is positive, i.e. 0-255. So we need to cast to (unsigned char)
when calling any of these.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Adding a read with the address of the thread pointer we want to
use will allow lib/thread.c to properly handle your thread pointers.
Instead we were setting the pointer to NULL before we passed
into the _read and _write thread functions. Remove the NULL
pointer set and just let thread.c handle everything.
vty_stdio_resume and vty_read would blindly add read and write
which would cause vty_event() to drop the thread pointer.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
We need to be calling snprintfrr() instead of snprintf() in places that
wrap snprintf in some user-exposed way; otherwise the extensions won't
be available for those functions.
Signed-off-by: David Lamparter <equinox@diac24.net>
Even when using the classic CLI mode (i.e. when --tcli is not
used), the northbound code still uses vty->candidate_config
to perform configuration changes. From the perspective of the
user, the running configuration is being edited directly, but
under the hood the northbound layer does a full configuration
transaction for each command. When the running configuration is
edited by a northbound client other than the CLI (e.g. kernel,
gRPC), vty->candidate_config might become outdated, and this can
lead to lots of weird problems. To fix this, always regenerate
vty->candidate_config before each configuration command when
using the classic CLI mode. When using the transactional CLI,
the user needs to update the candidate manually using the "update"
command, otherwise the "commit" command will fail with this error:
"% Candidate configuration needs to be updated before commit".
Fixes some problems reported by Don after moving an interface from
one VRF to another one while zebra is running.
Reported-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
This makes printfrr extensions available in most of our format strings.
snprintf() is the obvious exception.
Signed-off-by: David Lamparter <equinox@diac24.net>
Add 'no log commands' cli and at the same time add a
--command-log-always to the daemon startup cli.
If --command-log-always is specified then all commands are
auto-logged and the 'no log commands' form of the command
is now ignored.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The upcoming gRPC-based northbound plugin will run on a separate
pthread, and it will need to have access to the running configuration
global variable. Introduce a rw-lock to control concurrent access
to the running configuration. Add the lock inside the "nb_config"
structure so that it can be used to protect candidate configurations
as well (this might be necessary depending on the threading scheme
of future northbound plugins).
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
The ability to lock the running configuration to prevent other users
from changing it is a very important one. We already supported
the "configure exclusive" command but the lock was applied to
the CLI users only (other clients like ConfD could still commit
configuration transactions, ignoring the CLI lock). This commit
introduces a global lock for the running configuration that is
shared by all northbound clients, and provides a public API to
manipulate it. This way other northbound clients will also be able
to lock/unlock the running configuration if required (the upcoming
gRPC northbound plugin will have RPCs for that).
NOTE: this is a management-level lock for the running configuration,
not to be confused with low-level locks used to avoid data races.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
We can make use of the vty->config variable to know when the CLI
user is in the configuration mode or not. This is much simpler
than obtaining this information from the vty node, and also a more
robust solution (the three switch statements below, for example,
were out of sync).
Also, fix a bug where vty->config wasn't being unset in the
vty_config_exit() function (bug introduced by commit f344c66ea3).
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
The CLI code uses the vty->xpath[] array and the vty->xpath_index
variables to keep track of where the user is in the configuration
hierarchy. As such, we were resetting vty->xpath_index to zero
whenever the user exited from the configuration mode in order to
keep the index valid. We weren't doing this in the vty_stop_input()
function however, which is called when the user types ^C in the
terminal. This was leading to bugs like this:
zebra> en
zebra# conf t
zebra(config)# interface eth0
zebra(config-if)# ^C
zebra# conf t
zebra(config)# interface eth0
% Configuration failed.
Schema node not found.
YANG path: /frr-interface:lib/interface[name='eth0'][vrf='default']/frr-interface:lib
To fix this, do something more clever: instead of resetting the
XPath index whenever the user exits from the configuration mode,
do that when the user enters in the configuration mode. This way
the XPath index needs to be reset in a single place only, not to
mention it's a more robust solution.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Confirmed commits allow the user to request an automatic rollback to
the previous configuration if the commit operation is not confirmed
within a number of minutes. This is particularly useful when the user
is accessing the CLI through the network (e.g. using SSH) and any
configuration change might cause an unexpected loss of connectivity
between the user and the managed device (e.g. misconfiguration of a
routing protocol). By using a confirmed commit, the user can rest
assured the connectivity will be restored after the given timeout
expires, avoiding the need to access the router physically to fix
the problem.
When "commit confirmed TIMEOUT" is used, a new "commit" command is
expected to confirm the previous commit before the given timeout
expires. If "commit confirmed TIMEOUT" is used while there's already
a confirmed-commit in progress, the confirmed-commit timeout is
reset to the new value.
In the current implementation, if other users perform commits while
there's a confirmed-commit in progress, all commits are rolled back
when the confirmed-commit timeout expires. It's recommended to use
the "configure exclusive" configuration mode to prevent unexpected
outcomes when using confirmed commits.
When an user exits from the configuration mode while there's a
confirmed-commit in progress, the commit is automatically rolled
back and the user is notified about it. In the future we might
want to prompt the user if he or she really wants to exit from the
configuration mode when there's a pending confirmed commit.
Needless to say, confirmed commit only work for configuration
commands converted to the new northbound model. vtysh support will
be implemented at a later time.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
A while ago all FRR configuration commands were converted to use the
QOBJ infrastructure to keep track of configuration objects. This
means the configuration lock isn't necessary anymore because the
QOBJ code detects when someones tries to edit a configuration object
that was deleted and react accordingly (log an error and abort the
command). The possibility of accessing dangling pointers doesn't
exist anymore since vty->index was removed.
Summary of the changes:
* remove the configuration lock and the vty_config_lockless() function.
* rename vty_config_unlock() to vty_config_exit() since we need to
clean up a few things when exiting from the configuration mode.
* rename vty_config_lock() to vty_config_enter() to remove code
duplication that existed between the three different "configuration"
commands (terminal, private and exclusive).
Configuration commands converted to the new northbound model don't
need the configuration lock either since the northbound API also
detects when someone tries to edit a configuration object that
doesn't exist anymore.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
When reading in config files and we have failures on multiple
lines actually note the actual failure lines and return them.
This fixes an issue where we stopped counting errors after
the first one and we got missleading line numbers that
did not correspond to the actual problem.
This is fixed:
sharpd@donna ~/frr> sudo /usr/lib/frr/pimd --log=stdout -A 127.0.0.1 -f /etc/frr/pimd.conf
2018/10/11 09:41:01 PIM: VRF Created: default(0)
2018/10/11 09:41:01 PIM: pim_vrf_enable: for default
2018/10/11 09:41:01 PIM: zclient_lookup_sched_now: zclient lookup immediate connection scheduled
2018/10/11 09:41:01 PIM: zclient_lookup_new: zclient lookup socket initialized
2018/10/11 09:41:01 PIM: pimd 6.1-dev starting: vty@2611
2018/10/11 09:41:01 PIM: [EC 100663304] ERROR: No such command on config line 2: inteface lo
2018/10/11 09:41:01 PIM: [EC 100663304] ERROR: No such command on config line 3: ip igmp
2018/10/11 09:41:01 PIM: [EC 100663304] ERROR: No such command on config line 4: ip igmp join 224.1.1.1 13.13.13.2
^C2018/10/11 09:45:09 PIM: Terminating on signal SIGINT
2018/10/11 09:45:09 PIM: VRF Deletion: default(0)
Fixes: #3161
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
fabricd is built using the sources of isisd. To allow differentiation
in the code, -DFABRICD=1 is added to its preprocessor flags.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Sometimes a error state is detected when we have added
new code to FRR, but not updated all the places that
we should have. Consider this a developmental escape
that needs to be fixed.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Add a new error code LIB_ERR_SYSTEM_CALL to the ferr subsystem.
Additionally convert LIB_ERR_VRF_SOCKET to a more generic
LIB_ERR_SOCKET.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When we are logging a commands via the `log commands`
cli, use zlog_notice instead of zlog_err, since that
this is not an actual error situation.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com.
Implement vty shell integration and allow `bfdd` to be configured
through FRR's vtysh.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
When reading the config file add an ability to know
if we have properly read in anything. So that a daemon
can make fallback plans.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Sometimes output would be mangled when filtering with include as a
result of the following bugs:
* Filters were applied per each call to vty_out() instead of buffering
until a line break and then applying
* Long output would sometimes be cut due to using the wrong buffer
pointer
Also remove the trailing \n as it should no longer be necessary to
ensure the vty prompt ends up on a new line.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
* Add function to move all data to the start of a vector by shifting
over contiguous empty slots
* Use this function to remove empty slots leftover after
frrstr_filter_vec
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
* Fix potential NULL dereference
* Fix use of uninitialized value
* Fix leaking memory by not freeing regex_t
* Fix extra \n when using empty regex filter
* Clean up still-reachable hook memory
* Handle nonexistent pager
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
* Rewrite pager implementation
* Replace fprintf() with vty_out()
* Modify vty_out() for better vtysh support
* Remove static global outputfile var
* Remove fp argument from many vtysh functions
* Add some docs for stuff along the way
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
This patch adds a CLI preprocessor function that activates when `|` is
found in the command. This is the start of adding support for some text
processing utilities intended for inline use. The first one implemented
here is `| include`, which provides grep-like filtering of command
output.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
The following types are nonstandard:
- u_char
- u_short
- u_int
- u_long
- u_int8_t
- u_int16_t
- u_int32_t
Replace them with the C99 standard types:
- uint8_t
- unsigned short
- unsigned int
- unsigned long
- uint8_t
- uint16_t
- uint32_t
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
The PIM_NODE command is only being used to display
default vrf configuration. Move this into the
vrf display and remove PIM_NODE.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When using a non-integrated config and starting up
of a protocol daemon, we were not properly handling
all possible cases and as such when an user hit
an actual error they were getting (null) listed
for the message string.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
vty_frame() can be used to reduce the amount of output produced by "show
running-config" and "write ...". It buffers output in struct vty->frame
(1024 bytes) and outputs it when vty_out is called. If vty_out isn't
called, it can be removed with vty_endframe() later.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
1. Change hostname_get to cmd_hostname_get
2. Change domainname_get to cmd_domainname_get
3. New API to set domainname
3. Provide a CLI command to set domainname
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
Since we were only setting vty->wfd in config_write, vty->fd would
remain 0 and vty_close() wouldn't close vty->wfd.
Clean up the entire fd closing and make it more explicit. We were even
trying to write to stdin...
Reported-by: Jorge Boncompte <jbonor@gmail.com>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Now that the logging hole is plugged, we can just print config-loading
errors to the log. This has 2 hidden advantages:
- vty_read_config calls in SIGHUP don't print errors to /dev/null
- errors are consistently printed to syslog on --enable-cumulus
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
- SIGTSTP appropriately suspends the foreground terminal
- SIGINT causes the daemon to exit, regardless of -d
- SIGQUIT causes the daemon to daemonize, regardless of -d
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This reverts commit c14777c6bf.
clang 5 is not widely available enough for people to indent with. This
is particularly problematic when rebasing/adjusting branches.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
