This is a followup to commits 735e62 and 0b1442, where we forgot to apply
the same VIEW/ENABLE consolidation logic to vtysh. Also, we can't call
install_default() for the ENABLE node because some of the vty commands
installed by this function were already installed in the VIEW node before.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
If a command is put into the VIEW_NODE, it is going into the
ENABLE_NODE as well. This is especially true for show commands.
As such if a command is in both consolidate it down to VIEW_NODE.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
If you are in VIEW_NODE, the command should exist in ENABLE_NODE
as well. This is being done to reduce chances of code being
added to one but not the other NODE.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The RESTRICTED_NODE command is not used, introduces code
complexity and provides no additional levels of security.
The only way to get into RESTRICTED_NODE is to add, under
vty configuration the command 'anonymous restricted', and
then telnet to a daemon, provide a password, then type
'enable' and fail to enter the password three times.
Then the user can enter a very limited set of commands to
monitor bgp and only bgp behavior.
This commit removes both the RESTRICTED_NODE usage as well
as the lib/* usage of the code
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This patch improves zebra,ripd,ripngd,ospfd and bgpd so that they can
make use of 32-bit route tags in the case of zebra,ospf,bgp or 16-bit
route-tags in the case of ripd,ripngd.
It is based on the following patch:
commit d25764028829a3a30cdbabe85f32408a63cccadf
Author: Paul Jakma <paul.jakma@hpe.com>
Date: Fri Jul 1 14:23:45 2016 +0100
*: Widen width of Zserv routing tag field.
But also contains the changes which make this actually useful for all
the daemons.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Finally, this disables the config editing lock for isisd. It also
enables deprecation warnings for the lib/ and isisd/ to catch accidental
uses of vty->index.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
The keychain code is the only user of vty->index_sub; this is also
replaced with a qobj safe-pointer.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Prepares the library CLI functions for concurrent config access. Note
the vty->index pointer is still kept functional for the daemons to use.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
As mentioned in previous commits, this prepares to replace the vty's
"void *index" context position with a safe qobj pointer. This will
allow concurrent configuration editing by multiple users, as soon as no
more code (library included) in the daemon uses vty->index anymore.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This places the appropriate calls so library objects can be used with
qobj "pointers", especially in the CLI.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This adds 64-bit random identifiers as "safe pointers" which are also
type-tracked / can have type-specific extension methods.
This will be used by both the CLI (to keep safe references while in
config editing mode) as well as the Cap'n Proto code (to hand out
pointers to the user in a safe way and add per-type handlers)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This feature adds an L3 & L2 VPN application that makes use of the VPN
and Encap SAFIs. This code is currently used to support IETF NVO3 style
operation. In NVO3 terminology it provides the Network Virtualization
Authority (NVA) and the ability to import/export IP prefixes and MAC
addresses from Network Virtualization Edges (NVEs). The code supports
per-NVE tables.
The NVE-NVA protocol used to communicate routing and Ethernet / Layer 2
(L2) forwarding information between NVAs and NVEs is referred to as the
Remote Forwarder Protocol (RFP). OpenFlow is an example RFP. For
general background on NVO3 and RFP concepts see [1]. For information on
Openflow see [2].
RFPs are integrated with BGP via the RF API contained in the new "rfapi"
BGP sub-directory. Currently, only a simple example RFP is included in
Quagga. Developers may use this example as a starting point to integrate
Quagga with an RFP of their choosing, e.g., OpenFlow. The RFAPI code
also supports the ability import/export of routing information between
VNC and customer edge routers (CEs) operating within a virtual
network. Import/export may take place between BGP views or to the
default zebera VRF.
BGP, with IP VPNs and Tunnel Encapsulation, is used to distribute VPN
information between NVAs. BGP based IP VPN support is defined in
RFC4364, BGP/MPLS IP Virtual Private Networks (VPNs), and RFC4659,
BGP-MPLS IP Virtual Private Network (VPN) Extension for IPv6 VPN . Use
of both the Encapsulation Subsequent Address Family Identifier (SAFI)
and the Tunnel Encapsulation Attribute, RFC5512, The BGP Encapsulation
Subsequent Address Family Identifier (SAFI) and the BGP Tunnel
Encapsulation Attribute, are supported. MAC address distribution does
not follow any standard BGB encoding, although it was inspired by the
early IETF EVPN concepts.
The feature is conditionally compiled and disabled by default.
Use the --enable-bgp-vnc configure option to enable.
The majority of this code was authored by G. Paul Ziemba
<paulz@labn.net>.
[1] http://tools.ietf.org/html/draft-ietf-nvo3-nve-nva-cp-req
[2] https://www.opennetworking.org/sdn-resources/technical-library
Now includes changes needed to merge with cmaster-next.
FIB override routes are for routing protocols that establish
shortcut routes, or establish point-to-point routes that should
not be redistributed. Namely this is useful NHRP daemon to come.
Zebra is extended to select two entries from RIB the "best" entry
from routing protocols, and the FIB entry to install to kernel.
FIB override routes are never selected as best entry, and thus
are never adverticed to other routing daemons. The best FIB
override, or if it does not exist the otherwise best RIB is
selected as FIB entry to be installed.
Signed-off-by: Timo Teräs <timo.teras@iki.fi>
Acked-by: Donald Sharp <sharpd@cumulusnetworks.com>
[CF: Massage to fit cumulus tree]
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
When compiling with the json library instead of the json-c
library allow it to switch back to the old way of printing.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
zclient_stop(), which is used as antagonist to zclient_init(), needs to
undo the vrf_bitmap allocation. Otherwise zclient_init() will leak the
allocated memory, for example when zclient_reset() is used.
Reported-by: Lou Berger <lberger@labn.net>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
When displaying thread time for long running/busy
protocols, the space allocated may not be sufficient.
Allow the runtime to take a bit more space.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
distribute.c doesn't allow to manage both v4 and v6 distribute lists. This
patch fix this problem by having 4 DISTRIBUTE* values in the enumeration instead
of two. The code in all daemons using distribute.c is adapted.
* zclient.c: prefix length on router-id and interface address add
messages not sanity checked. fix.
* */*_zebra.c: Prefix length on zebra route read was not checked, and
clients use it to write to storage. An evil zebra could overflow
client structures by sending overly long prefixlen.
Prompted by discussions with:
Donald Sharp <sharpd@cumulusnetworks.com>
Linux/glibc sys/param.h has definitions of MIN/MAX that result in
multiple evaluations of its parameters. Force local definitions.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
On OpenIndiana/Solaris the build fails with "unsupported multicast API".
It's only in the IPv4 part where setsockopt IP_MULTICAST_IF needs a
local address and not the index (IPv6 wants the index).
The following code walks the list of interfaces until it finds the matching
index and uses the interface's local address for the setsockopt call.
I don't know if it works on Solaris < 10 (I guess yes, but I don't have
any machine to verify it).
[NB: this breaks unnumbered setups that use the same IPv4 address on
multiple interfaces. -- equinox@opensourcerouting.org]
Reported-by: Brian Utterback <brian.utterback@oracle.com>
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Patchwork #762
ICC thinks we're storing a pointer and might be losing bits at the top:
error #810: conversion from "void *" to "route_map_event_t={enum
<unnamed>}" may lose significant bits
Build is warning-free on ICC 14.0.3 (for Linux x86_64) with this.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
FIB override routes are for routing protocols that establish
shortcut routes, or establish point-to-point routes that should
not be redistributed. Namely this is useful NHRP daemon to come.
Zebra is extended to select two entries from RIB the "best" entry
from routing protocols, and the FIB entry to install to kernel.
FIB override routes are never selected as best entry, and thus
are never adverticed to other routing daemons. The best FIB
override, or if it does not exist the otherwise best RIB is
selected as FIB entry to be installed.
Signed-off-by: Timo Teräs <timo.teras@iki.fi>
Acked-by: Donald Sharp <sharpd@cumulusnetworks.com>
[CF: Massage to fit cumulus tree]
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Replace all HAVE_MPLS #ifdef's by a run-time check if MPLS is supported
by the kernel or not. This way we don't need to create multiple packages
for each OS distribution.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Since recently zebra uses only the ZEBRA_REDISTRIBUTE_* messages
to advertise redistributed routes to its clientes. Now the old
ZEBRA_IPV*_ROUTE_* messages are only used for client->zebra communication.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
This patch installs labeled static routes in the FIB. The routes are installed
using the RTA_ENCAP (and RTA_ENCAP_TYPE) nested attributes.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Ticket: CM-6040
Reviewed By: CCR-3091
Testing Done: Tested in SE-1, brief manual testing now
Install the statically configured LSPs into the FIB (kernel). This is done
using the new attributes and definitions for MPLS in the kernel -
RTA_VIA, RTA_NEWDST and AF_MPLS.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Ticket: CM-4804
Reviewed By: CCR-3088
Testing Done: Manual in SE-1
Add support for statically configuring MPLS transit LSPs. This allows the
configuration of ILM to one or more NHLFE, as defined in RFC 3031. The
currently supported nexthop types are IPv4 or IPv6.
The two label operations supported are swap and PHP; the latter is configured
by specifying the out-label as "implicit-null". Note that the operation is
against the label, so it should be the same for all NHLFEs.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Ticket: CM-4804, ...
Reviewed By: CCR-3085
Testing Done: In combination with other patches
This is useful for DSO modules in order to get support for unloading
them dynamically. It also runs on exit, which doesn't matter much.
At some future point, the code could be extended to check that
allocation counts are 0 on unloading a module.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
