* Add centralized thread scheduling dispatchers for client threads and
the main thread
* Rename everything in zserv.c to stop using a combination of:
- zebra_server_*
- zebra_*
- zserv_*
Everything in zserv.c now begins with zserv_*.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
* Rename client_connect and client_close hooks to zapi_client_connect
and zapi_client_close
* Remove some more unnecessary headers
* Fix a copy-paste error in zapi_msg.[ch] header comments
* Fix an inclusion comment in zserv.c
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
zserv.c was using hardcoded callbacks to clean up various components
when a client disconnected. Ergo zserv.c had to know about all these
unrelated components that it should not care about. We have hooks now,
let's use the proper thing instead.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
zserv.c has become something of a dumping ground for everything vaguely
related to ZAPI and really needs some love. This change splits out the
code fo building and consuming ZAPI messages into a separate source
file, leaving the actual session and client lifecycle code in zserv.c.
Unfortunately since the #include situation in Zebra has not been paid
much attention I was forced to fix the headers in a lot of other source
files. This is a net improvement overall though.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
When I implemented this code change I was only testing against
static routes and with one nexthop. I missed the fact that
we needed to tell rib_process to actually rethink the nexthops.
Ticket: CM-20274
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When we have a PBR installed as a table, we need to notice
when a nexthop changes and rethink the routes for the pbr
tables.
Add code to nexthop tracking to notice the pbr watched
nexthop has changed in some manner. If it is a pbr route
that depends on the nexthop then just enqueue it for
rethinking.
This is a bit of a hammer, we know that only pbr routes
are going to be installing routes in weird non-standard
tables as such we need to only handle nexthop changes
for nexthops that are actually changing that we care
about and to only requeue for route nodes we have
route entries for from PBR
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The following types are nonstandard:
- u_char
- u_short
- u_int
- u_long
- u_int8_t
- u_int16_t
- u_int32_t
Replace them with the C99 standard types:
- uint8_t
- unsigned short
- unsigned int
- unsigned long
- uint8_t
- uint16_t
- uint32_t
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
When we are signaling to a client from zebra that a nexthop
has changed, include the labels on the nexthop as well.
Upper level protocols need to know if the labels exist
in order to make intelligent decisions about what to do.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Group send and receive functions together, change handlers to take a
message instead of looking at ->ibuf and ->obuf, allow zebra to read
multiple packets off the wire at a time.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Also modify `struct route_entry` to use nexthop_groups.
Move ALL_NEXTHOPS loop to nexthop_group.h
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Add the originating routes type and instance to the nexthop
update message. This is necessary because there exist
scenarios where BGP needs to make a decision about the
originating route type and instance to know if it is
going to be doing a route replace to a route that would
resolve to itself.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The nh_resolve_via_default function is an accessor function
for NHT in zebra. Let's move this function to it's proper
place.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The encoding of the nexthop update made some distinctions
between nexthop types that it does not need to.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The function zserv_create_header was exactly the same
as zclient_create_header. Let's just have one in the
system.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
With VRF route-leaking we need to know what vrf
the nexthops are in compared to this vrf. This
code adds the nh_vrf_id to the route entry and
sets it up correctly for the non-route-leaking
case.
The assumption here is that future commits
will make the nh_vrf_id *different* than
the vrf_id.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Problems reported with zebra nht oscillating when a nexthop is resolved
using the same address to reach the nexthop (for example, 10.0.0.8 is
resolved via 10.0.0.8/32.) This fix removes this attempt to resolve
thru itself unless the route being resolved is also a host route.
This fix also walks up the tree looking for a less specific route to
reach the nexthop if needed. Smoke testing completed successfully.
Ticket: CM-8192
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Reviewed-by: CCR-6583
Testing done: Manual testing successful, bgp-min completed successfully
l3-smoke completed with two test changes required.
list_free is occassionally being used to delete the
list and accidently not deleting all the nodes.
We keep running across this usage pattern. Let's
remove the temptation and only allow list_delete
to handle list deletion.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Current cleanup is for unset values or variables that are not used anymore.
Regarding ospfd/ospf_vty.c: argv_find()
we'll never get it NULL, so get coststr = argv[idx]->arg;
This fixes the broken indentation of several foreach loops throughout
the code.
From clang's documentation[1]:
ForEachMacros: A vector of macros that should be interpreted as foreach
loops instead of as function calls.
[1] http://clang.llvm.org/docs/ClangFormatStyleOptions.html
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
With the introduction of the pseudowire manager, the NHT tracking code
needs to detect label updates as well.
Create a specific nexthop flag for that. We can't reuse the
RIB_ENTRY_NEXTHOPS_CHANGED flag for this porpose because this flag is
always cleared and reevaluated in rib_process(), setting it outside that
function is a nop.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
If the remote end of a pseudowire becomes unreachable (no route or an
unlabeled route), then it must be uninstalled. In the same way, when
the remote end becomes reachable, the pseudowire must be installed.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
The 'struct rib' data structure is missnamed. It really
is a 'struct route_entry' as part of the 'struct route_node'.
We have 1 'struct route_entry' per route src. As such
1 route node can have multiple route entries if multiple
protocols attempt to install the same route.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Fix for another issue with next-hop tracking for overlapping static routes
created a problem removing the dead routes. This fix corrects that error.
Ticket: CM-13710
Signed-off-by: Don Slice
Reviewed By: Donald Sharp
Testing Done: ospf-smoke, bgp-smoke
The FSF's address changed, and we had a mixture of comment styles for
the GPL file header. (The style with * at the beginning won out with
580 to 141 in existing files.)
Note: I've intentionally left intact other "variations" of the copyright
header, e.g. whether it says "Zebra", "Quagga", "FRR", or nothing.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Suppose we are handling the process_workq and either a new static
route is installed or a Routing Protocol installs a new route.
We will call evaluate_rnh with a specific prefix. We might
have a situation where we clear the NHC flag prematurely.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Zebra when it was scanning the tree would unset NEXTHOPS_CHANGED
after the first notification. If the route we are notifying because
of covers multiple interesting nexthops then we would be unable
to know that we need to notify for that one as well because of
the flag removal.
Ticket: CM-15157
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This provides DMVPN support and integrates to strongSwan. Please read
README.nhrpd and README.kernel for more details.
[DL: cherry-picked from dafa05e65fe4b3b3ed5525443f554215ba14f42c]
[DL: merge partially resolved, this commit will not build.]
Signed-off-by: Timo Teräs <timo.teras@iki.fi>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
In the future we plan to update Nexthop tracking to better
handle ipv6 lla. This commit will set this up for that.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When passing up NEXTHOP_TYPE_IPV4 pass up the ifindex as well
Zebra already stores this data by passing it up PIM will be
able to use NEXTHOP_TYPE_IPV4 without having to do a recursive
lookup.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Don Slice <dslice@cumulusnetworks.com>
Reviewed-by: Chirag Shah <chirag@cumulusnetworks.com>
When zebra calls routing protocols back with either
ZEBRA_NEXTHOP_UPDATE or ZEBRA_IMPORT_CHECK_UPDATE
pass the distance value too.
This is to set us up for nht for pim as that it needs
the distance sometimes too.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
