Ticket: CM-15658
Reviewed By: CCR-6534
Testing Done: Unit
Issue: frr ptm-enable command not working for interfaces that have been created by frr as a place holder.
Root Cause: The ptm-enable on interface configuration was not getting stored when the interface was internally created by frr.
Fix: Store the ptm-enable configuration even if the interface is internally created.
Signed-off-by: Radhika Mahankali <radhika@cumulusnetworks.com>
Ensure that the next hop of the leaked VRF is not overwritten when the
route is being imported into the target VRF from the VPN table. Also, in
the case of multipath routes, ensure that the nexthop's ifindex is not
inadvertently reset.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Netlink messages from the kernel need to be received in a buffer larger
than 8K in order to handle some types of info - for example, the VLAN
information. Define a separate size for receive and set it to 32K, which
is the value used by other netlink receivers like iproute2.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
When zebra starts up it receives from the kernel a full dump of
interface information. Unfortunately it is in no particular order.
As such we sometimes receive data from the kernel about interfaces
we do not know about yet.
In this bug, we are attempting to use the interface pointer(->link)
for a vlan interface that we have not properly resolved.
This fix ensures that we will not attempt to call zvni_map_svi
if we have a NULL pointer. There are other places in the code
we are already checking for the fact that the ->link pointer
is valid before calling this function, so I believe that this
is correct.
We do need to come back and resolve all ->link pointers
after we have received the full table. This can be
done in another commit.
Ticket: CM-17041
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
We have a command to enable symmetric routing only for type-5 routes.
This command is provided under vrf <> option in zebra as follows:
vrf <VRF>
vni <VNI> [prefix-routes-only]
We need the corresponding no version of the command as well as follows:
vrf <VRF>
no vni <VNI> [prefix-routes-only]
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
For ipv6 host, the next hop is conevrted to ipv6 mapped address.
However, the remote rmac should still be programmed with the ipv4 address.
This is how the entries will look in the kernel for ipv6 hosts routing.
vrf routing table:
ipv6 -> ipv6_mapped remote vtep on l3vni SVI
neigh table:
ipv6_mapped remote vtep -> remote RMAC
bridge fdb:
remote rmac -> ipv4 vtep tunnel
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
Ensure that when EVPN routes are installed into zebra, the router MAC
is passed per next hop and appropriately handled. This is required for
proper multipath operation.
Ticket: CM-18999
Reviewed By:
Testing Done: Verified failed scenario, other manual tests
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
There are cases when switching from one netns to an other one, where the
if_table registration by index has not been flushed. This fix mitigates
the potential crashes, in case the ifp->node pointer is null, the value
is overwritten by the route_node obtained.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
When checking for a duplicate interface in an other NETNS, one may find
an interface in default VRF. That interface may have been moved to that
default VRF, for further action. Prevent from doing any action at this
point.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
The log information is better displated.
Also the variable name fits better with other_ifp, than with old_ifp.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
re->status and re->flags both influence our decision states
for rib processing. Yet it's impossible to see them. Add
a tiny bit of code to allow us to look at them when things
are not behaving like we would expect.
Additionally dump the nexthop->flags at the same time for
the same reasons.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The zns->ns pointer is not created until we get a callback
from the kernel that a ns exists. This should potentially
fix a crash in the *BSD code path.
Fixes: #2152
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Since BGPd is not currently setting ID and PROTOCOL in label
requests, temporally disable mismatch error propagation.
This commit will be reverted once fixes for BGPd and label
manager are integrated.
Signed-off-by: Fredi Raspall <fredi@voltanet.io>
The current implementation did not consider multiple clients to
a label-manager acting as proxy, i.e. relaying messages to another
label manager. Specifically, upon a client's request, it checked
the socket & buffer from the actual label manager for pending
responses and directly copìed them to the client --currently--
being served. As a result, if two clients (e.g. ldpd and bgpd)
sent requests, it could happen that responses being 'on the wire'
from the real label manager towards the proxy, where relayed to
the wrong client. This patch, which requires all msgs to include
a a proto & instance pair, lookups up the zserv client that a
message (response) is to be relayed to.
Signed-off-by: Fredi Raspall <fredi@voltanet.io>
Add client proto and instance number in all msg (request and
responses) to/form a label manager. This is required for a
label manager acting as 'proxy' (i.e. relaying messages towards
another label manager) to correctly deliver responses to the
requesting clients.
Signed-off-by: Fredi Raspall <fredi@voltanet.io>
We are missing some handling of PBR and SHARP protocols
for netlink operations w/ the linux kernel.
Additionally add a bread crumb for new developers( or existing )
to know to fixup the rt_netlink.c when we start handling new
route types to hand to the kernel.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
In a prior refactor, label manager proxy functionality
was broken in two places:
1) in function relay_response_back(), "dst" stream was
accidentally replaced by "src".
2) in zread_relay_label_manager_request(), src was set to point
to a global struct stream *ibuf that was not used/initialized
anywhere.
Signed-off-by: Fredi Raspall <fredi@voltanet.io>
When we are debugging add a bit of extra information
so we can know what we are redistributing to our peers
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
* Rename client_connect and client_close hooks to zapi_client_connect
and zapi_client_close
* Remove some more unnecessary headers
* Fix a copy-paste error in zapi_msg.[ch] header comments
* Fix an inclusion comment in zserv.c
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
zserv.c was using hardcoded callbacks to clean up various components
when a client disconnected. Ergo zserv.c had to know about all these
unrelated components that it should not care about. We have hooks now,
let's use the proper thing instead.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
zserv.c has become something of a dumping ground for everything vaguely
related to ZAPI and really needs some love. This change splits out the
code fo building and consuming ZAPI messages into a separate source
file, leaving the actual session and client lifecycle code in zserv.c.
Unfortunately since the #include situation in Zebra has not been paid
much attention I was forced to fix the headers in a lot of other source
files. This is a net improvement overall though.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
When changing from "ip import-table 10 route-map rdn" to "ip
import-table 10" without a route-map, routes would be deleted
and not reinstalled. This fix resolves that problem.
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Zebra is starting to have some run-time capabilites that would be
useful to pass up to the higher level protocols so that they
can act in an appropriate manner when needed.
Send the ecmp value zebra is being run with and whether or not
we believe mpls is enabled in the kernel or not.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The mpls_label2str and mpls_str2label functions should not
be zebra exclusive functions. Move them to lib/mpls.c
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Somewhere along the way the ability to install multiple
pbr-policys for the same pbr-map was lost.
Add this back. There is a limitation in that we are limited
to 64 interfaces per pbr-policy.
Ticket: CM-20429
Signed-off-by: Donald Sharp sharpd@cumulusnetworks.com>
When I implemented this code change I was only testing against
static routes and with one nexthop. I missed the fact that
we needed to tell rib_process to actually rethink the nexthops.
Ticket: CM-20274
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Need to explicitly exit this context otherwise we risk ambiguities
between global and vrf context commands
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
When a user specifies static routes, there are a couple of states
where we will store the route and display it as part of the 'show run'
but it will not be installed until such time that the dependant state
is created. Add some breadcrumbs to the user so that they can figure
out WTF just happened.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
