New CLI commands added:
router pim [vrf NAME]
autorp discovery
autorp announce RP-ADDR [GROUP | group-list PREFIX-LIST]
autorp announce {scope (1-255) | interval (1-65535) | holdtime (0-65535)}
autorp discovery
Enables Auto RP discovery for learning dynamic RP information using the
AutoRP protocol.
autorp announce RP-ADDR [GROUP | group-list PREFIX-LIST]
Enable announcements of a candidate RP with the given group range, or
prefix list of group ranges, to an AutoRP mapping agent.
autorp announce {scope (1-255) | interval (1-65535) | holdtime (0-65535)}
Configure the parameters of the AutoRP announcement messages.
The scope sets the packet TTL.
The interval sets the time between TX of announcements.
The holdtime sets the hold time in the message, the time the mapping
agent should wait before invalidating the candidate RP information.
debug pim autorp
Enable debug logging of the AutoRP protocol
show ip pim [vrf NAME] autorp [json]
Show details of the AutoRP protocol.
To view learned RP info, use the existing command 'show ip pim rp-info'
Extend pim yang for new configuration:
augment /frr-rt:routing/frr-rt:control-plane-protocols/frr-rt:control-plane-protocol/frr-pim:pim/frr-pim:address-family:
+--rw rp
+--rw auto-rp
+--rw discovery-enabled? boolean
+--rw announce-scope? uint8
+--rw announce-interval? uint16
+--rw announce-holdtime? uint16
+--rw candidate-rp-list* [rp-address]
+--rw rp-address inet:ip-address
+--rw (group-or-prefix-list)?
+--:(group)
| +--rw group? frr-route-types:ip-multicast-group-prefix
+--:(prefix-list)
+--rw prefix-list? plist-ref
Signed-off-by: Nathan Bahr <nbahr@atcorp.com>
f1ea52bee9 ("yang: use relative path instead of absolute one for
route-map") has introduced a route-map optimization but some paths
were not changed.
Use relative path instead absolute one everywhere.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
This will add a static IGMP group that does not rely on an underlying
socket join which sends traffic to the cpu unneccesarily. Instead, the
groups are joined directly without any IGMP interactions.
New command is under interfaces, 'ip igmp static-group ...'.
Added an alias for 'ip igmp join ...' to 'ip igmp join-group'.
Moved IGMP join groups to new yang list "join-group" and reused
the "static-group" list for the IGMP static groups.
Signed-off-by: Nathan Bahr <nbahr@atcorp.com>
Using absolute xpath is not optimal for finding the target node. As the
route map configuration grows, the yang validation will take more time
to complete. Relative paths are much faster.
Tested with a config file that contains ~3k route map config lines.
- before:
time cat conf | vtysh
configure
log syslog errors
router bgp 65000
!
route-map RM:BGP:VPNV4:PEER:VRR9:IN10001 permit 101
match community CL:HCC:PATH_PRIO1_EAST1
set local-preference 15200
!
...
route-map RM:BGP:VPNV4:PEER:VRR9:IN10001 permit 1182
match community CL:HCC:PATH_PRIO1_EAST1082
set local-preference 16281
!
real 13m51.500s
user 0m0.522s
sys 0m4.854s
- after:
time cat conf | vtysh
...
real 0m48.390s
user 0m0.384s
sys 0m1.245s
Signed-off-by: Loïc Sang <loic.sang@6wind.com>
In route-map: `match tag untagged`.
E.g. Cisco/Juniper allows that, but they use `match tag 0` instead.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
This was caught by the grpc_basic test which was receiving an invalid error
result, which was returned b/c inside zebra the libyang code was flagging the
value as invalid for a derived zebra interface type.
Signed-off-by: Christian Hopps <chopps@labn.net>
When the ISIS instance does not exist, this check causes the default value of the ISIS instance's metric to become narrow.
The following two scenarios present issues:
1) When the ISIS metric configuration under the interface exceeds 63, we are unable to delete the ISIS instance.
2) When the ISIS instance is not created, we are unable to modify an ISIS metric that exceeds 63.
Signed-off-by: zhou-run <166502045+zhou-run@users.noreply.github.com>
We need to operate w/o cryptographic algorithm during key creation
due to how our legacy CLI works (each command issuing a single YANG
modification).
Signed-off-by: Christian Hopps <chopps@labn.net>
The code expects these leafs to always exist. If they are not set, the
daemon would crash. CLI always sets them, but we should properly mark
them as mandatory/default to prevent them from being missed when using
the API.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Allow bandwidth up to 1000000 Mb/s (ie. 1 Tb/s) and document it.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Make link-params a presence container and activate it when entering the
node. The "enable" command is not necessary anymore but kept hidden for
backwards compatibility.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Replace "shutdown" leaf with "enabled" leaf in frr-zebra YANG module
to make it in line with standard YANG models.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
When affinity mode is "standard", bit position cannot be greater than
31. Add a "must" statement to the YANG model to validate this, and
remove our custom validation code that does the same.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Change the type of affinity leaf-list in frr-zebra to a leafref with
"require-instance" property set to true. This change tells libyang to
automatically check that affinity-map exists before usage and doesn't
allow it to be deleted if it's referenced. It allows us to remove all
the manual code that is doing the same thing.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Technically changing a leaf from uint16 to uint32 is a NBC change; however,
increasing this to uint32 should not break anyone in reality.
Signed-off-by: Christian Hopps <chopps@labn.net>
Create Local routes in FRR:
S 0.0.0.0/0 [1/0] via 192.168.119.1, enp39s0, weight 1, 00:03:46
K>* 0.0.0.0/0 [0/100] via 192.168.119.1, enp39s0, 00:03:51
O 192.168.119.0/24 [110/100] is directly connected, enp39s0, weight 1, 00:03:46
C>* 192.168.119.0/24 is directly connected, enp39s0, 00:03:51
L>* 192.168.119.224/32 is directly connected, enp39s0, 00:03:51
O 192.168.119.229/32 [110/100] via 0.0.0.0, enp39s0 inactive, weight 1, 00:03:46
C>* 192.168.119.229/32 is directly connected, enp39s0, 00:03:46
Create ability to redistribute local routes.
Modify tests to support this change.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
It's been for a while disabled by default, but this seems reasonable to flip it.
We had `bgp enforce-first-as` as a global BGP knob to enable/disable this
behavior globally, later we introduced `enforce-first-as` per neighbor, with disabled
by default. Now let's enable this by default by bringing a global `bgp enforce-first-as`
command back.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
There is no match mechanism to match one community from the
incoming community-list. Add the 'any' keyword to the 'match
route-map' command of communit-list and large-community-list.
> match community-list AAA any
> match large-community-list AAA any
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
