The command fast-reroute lfa tiebreaker [downstream | lowest-backup-metric | node-protecting] index (1-255) [level-1 | level-2] will overwrite configurations with the same index but different types. This is because the index is set as the key in frr-isisd.yang. However, the lfa_tiebreaker_cmp function uses a tuple (index, type) as the key. Therefore, the yang file should be modified to stay in sync with the business logic.
Test Scenario:
On RouterA, first configure fast-reroute lfa tiebreaker downstream index 100 level-1, then configure fast-reroute lfa tiebreaker lowest-backup-metric index 100 level-1, and check the configuration:
!
router isis 10
fast-reroute lfa tiebreaker lowest-backup-metric index 100 level-1
exit
!
Signed-off-by: baozhen-H3C <bao.zhen@h3c.com>
The algorithm number is encoded on 8 bits and does not require
an unsigned 32 bit value to store the value.
Fixes: cc4926c128 ("isisd,yang: add algorithm-prefix-sid configuration tree")
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
When the ISIS instance does not exist, this check causes the default value of the ISIS instance's metric to become narrow.
The following two scenarios present issues:
1) When the ISIS metric configuration under the interface exceeds 63, we are unable to delete the ISIS instance.
2) When the ISIS instance is not created, we are unable to modify an ISIS metric that exceeds 63.
Signed-off-by: zhou-run <166502045+zhou-run@users.noreply.github.com>
Add the `locator` leaf to the IS-IS YANG model under the
`segment-routing-srv6` container.
Signed-off-by: Carmine Scarpitta <carmine.scarpitta@uniroma2.it>
The yang model does not handle the table identifier in IS-IS.
For each redistributed each address family, a new list of
table elements is added to store the table identifier to
redistribute, and also the optional metric and route-map values
for each table identifier.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Define the IS-IS flex-algo structure in yang, the CLI configuration
commands and the skeletons of frontend and backend functions that are
called by the CLI code.
Signed-off-by: Hiroki Shirokura <hiroki.shirokura@linecorp.com>
Signed-off-by: Eric Kinzie <ekinzie@labn.net>
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Add the ability to configure a Segment-Routing prefix SID for a given
algorithm. For example:
> segment-routing prefix 10.10.10.10/32 algorithm 128 index 100
Signed-off-by: Hiroki Shirokura <hiroki.shirokura@linecorp.com>
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
New config functionality:
r1# conf
r1(config)# router isis 1
r1(config-router)# log-
log-adjacency-changes Log changes in adjacency state
log-pdu-drops Log any dropped PDUs
r1(config-router)# log-pdu-drops
r1(config-router)# end
Signed-off-by: Isabella de Leon <ideleon@microsoft.com>
New config and show functionality:
r1# conf
r1(config)# router isis 1
r1(config-router)#
advertise-high-metrics Advertise high metric value on all interfaces
area-password Configure the authentication password for an area
...
r1(config-router)# advertise-high-metrics
r1(config-router)# end
r1# show isis summary
...
Area 1:
Net: 49.0001.1720.1700.0002.00
TX counters per PDU type:
L2 IIH: 1
P2P IIH: 36
LSP RXMT: 0
RX counters per PDU type:
Advertise high metrics: Enabled
Level-2:
...
r1# conf
r1(config)# router isis 1
r1(config-router)# no advertise-high-metrics
r1(config-router)# end
r1# show isis summary
...
Area 1:
Net: 49.0001.1720.1700.0002.00
TX counters per PDU type:
L2 IIH: 1
P2P IIH: 45
LSP RXMT: 0
RX counters per PDU type:
Advertise high metrics: Disabled
Level-2:
...
r1#
Signed-off-by: Isabella de Leon <ideleon@microsoft.com>
New configuration to pad ISIS hello packets during adjacency formation only.
Signed-off-by: Diogo Oliveira <14191454+dorDiogo@users.noreply.github.com>
YANG files get to keep their license boilerplate in addition to the SPDX
header, since they are likely to be copied around individually.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Before:
r1# conf
r1(config)# router isis <area-tag>
r1(config-router)# set-overload-bit
<cr>
r1(config-router)# end
After:
r1# conf
r1(config)# router isis <area-tag>
r1(config-router)# set-overload-bit
<cr>
on-startup Set overload bit on startup
r1(config-router)# set-overload-bit on-startup
(0-86400) Set overload time in seconds
r1(config-router)# set-overload-bit on-startup 300
r1(config-router)# end
Signed-off-by: Isabella de Leon <ideleon@microsoft.com>
Only the multi-topology command can use 'ipv4-unicast' keyword to
configure standard topology.
The remaining code: dump from show commands, and yang definition,
uses 'standard' keyword instead.
The test have not been modified. The change would consists in
modifying test_fuzz_isis_tlv_tests.h.gz:
- replacing ipv4-unicast occurences with standard
\x69\x70\x76\x34\x2d\x75\x6e\x69\x63\x61\x73\x74
with
\x73\x74\x61\x6e\x64\x61\x72\x64
- align the buffer length by removing 4 bytes per occurence
Instead, a specific isis_mtid2str_fake() routing has been
put in place in isis_tlvs.c file.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Add Link State TED features to isis_te.c and new CLI to export LS TED and
show LS TED to IS-IS.
IS-IS LSPs are parse each time a new LSP event occurs in order to update
accordingly the Link State Traffic Engineering Database. LS TED could be
exported through the ZAPI Opaque message (see sharpd as example).
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
- Add advertisement of Global IPv6 address in IIH pdu
- Add new CLI to set IPv6 Router ID
- Add advertisement of IPv6 Router ID
- Correctly advertise IPv6 local and neighbor addresses in Extended IS and MT
Reachability TLVs
- Correct output of Neighbor IPv6 address in 'show isis database detail'
- Manage IPv6 addresses advertisement and corresponiding Adjacency SID when
IS-IS is not using Multi-Topology by introducing a new ISIS_MT_DISABLE
value for mtid (== 4096 i.e. first reserved flag set to 1)
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
Compile with v2.0.0 tag of `libyang2` branch of:
https://github.com/CESNET/libyang
staticd init load time of 10k routes now 6s vs ly1 time of 150s
Signed-off-by: Christian Hopps <chopps@labn.net>
The current implementation of TI-LFA computes link-protecting
repair paths (even when node protection is enabled) to have repair
paths to all destinations when no node-protecting repair has been
found. This may be desired or not. E.g. the link-protecting paths
may use the protected node and be, therefore, useless if the node
fails. Also, computing link-protecting repairs incurs extra
calculations.
With this patch, when node protection is enabled, link protecting
repair paths are only computed if "link-fallback" is specified in
the configuration, on a per interface and IS-IS level.
Signed-off-by: Fredi Raspall <fredi@voltanet.io>
YANG model and CLI commands allow user to configure LDP-sync per area.
But the actual implementation is incorrect - all commands are changing
the config for the whole VRF instead of a single area. This commit fixes
this issue by actually implementing per area configuration.
Fixes#8578.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
when changing both ranges at the same time the order of the commands
matters, as we need to make sure that the intermediate state is valid.
This represents a problem when pushing configuration via frr-reload.
To fix this, the global-block command was extended to optionally
allow setting the local-block range as well. The local-block command
is deprecated with a 1-year notice.
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
The purpose of the Attach-bit is to accomplish inter-area routing. In other
venders, the Attached-bit is automatically set when a router is configured
as a L1|L2 router and has two adjacencies. When a L1 router receives a LSP
with the Attached-bit set it is supposed to create a default route pointing
toward the neighbor to provide a default path out of the L1 area.
ISIS implementation has been fixed to support the above definition:
Setting the Attach-bit is now the default behavior and we allow the user to
turn it off.
We will only set the Default Attach-bit when creating a L1 LSP, if we are
a L1|L2 router and have a L2 adjacency up.
When a L1 router receives a LSP with the Attach-bit set, we will create a
default route pointing to the L1|L2 router as the nexthop.
The default route will be removed if the LSP is received with the Attach-bit
cleared.
Signed-off-by: Lynne Morrison <lynne@voltanet.io>
Add the "n-flag-clear" option to the "segment-routing prefix"
command. The only thing that option does is to clear the node
flag of the Prefix-SID, even if it corresponds to a local loopback
address. No changes are necessary other than that in order to fully
support Anycast-SIDs. isisd already supports multiple routers
advertising the same route with the same Prefix-SID after the recent
refactoring. Clearing the node flag for such anycast routes isn't
strictly required, but failure to do so can lead to problems like
TI-LFA picking the wrong Prefix-SID when calculating repair paths.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
1. Added isis with different vrf and it's dependecies.
2. Added new vrf leaf in yang.
3. A minor change for IF_DOWN_FROM_Z passing argrument is
replaced with ifp pointer in api "isis_if_delete_hook()".
4. Minor fix in the isisd spf unit test.
Co-authored-by: Kaushik <kaushik@niralnetworks.com>"
Signed-off-by: harios_niral <hari@niralnetworks.com>
BFD profiles can now be used on the interface level like this:
interface eth1
ip router isis 1
isis bfd
isis bfd profile default
Here the 'default' profile needs to be specified as usual in the
bfdd configuration.
Signed-off-by: GalaxyGorilla <sascha@netdef.org>
Segment Routing Local Block (SRLB) is part of RFC8667. This change introduces
the possibility for isisd to advertize SRLB in LSP. Base and Range of SRLB
could be configured through CLI or Yang.
Adjacency-SID are now using this SRLB for label allocation. SRLB could also
be used for SID-Binding (e.g. LDP to SR).
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
Now that the "frr-interface" list has a "state" container, move the
IS-IS interface state nodes underneath it using a new augmentation.
Also, update the IS-IS SR topotest to account for this change. Make
use of symlinks where possible to avoid having multiple files with
the same content.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Most definitions were borrowed from the IETF IS-IS SR YANG module,
with a few adaptations. Of particular notice are the following:
* No support for the configuration of multiple SRGBs.
* No distinction between local and connected Prefix-SIDs, both are
configured the same way.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Yang constraints enforced by the northbound callbacks require that
the maximum lifetime be >= than (refresh interval + 300). When we are
moving from one config to another through frr-reload.py, we issue
a number of vtysh -c commands ('no lsp-refresh-interval level-1 500',
'no max-lsp-lifetime level-1 1000'), which reset these parameters to their
default values, respectively 900 and 1200. Depending on the actual
values in the current config, the order in which these commands are sent
might be the wrong one, in that we hit an invalid intermediate state and
make vtysh (and by extension frr-reload.py) return an error.
As a workaround, let's add a one-liner command that sets all these
inter-related parameters in one go, and make isisd display them as a
single line too, so that the diff will be computed as a single command.
The old individual commands are kept to ensure backwards compatibility.
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
Currently isisd has this strange (legacy) behavior where the
first area is created by default with level-1-2, while every
other subsequent area uses the default defined in the yang model,
which is level-1. This is a source of confusion when trying to
configure the daemon programatically, either with frr-reload
or using the transactional cli. Given how rare having multiple
IS-IS instances is anyway, the easiest solution is to remove
this behavior and default to level-1-2 for every area.
Note that this does not affect fabricd, which continues using
exclusively level-2-only areas.
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
The new "event-counters" grouping is almost a 1:1 copy of the same
grouping from the IETF IS-IS module, except for the "lan-dis-changes"
leaf which was skipped (more work needs to be done to support it).
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
The new "adjacency-state" grouping is almost a 1:1 copy of the
same grouping from the IETF IS-IS module, except for the "usage"
and "lastuptime" leafs that were skipped (more work needs to be
done to support those).
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Do this to better separate config data from state data (coming in
the next commits) like done in the IETF IS-IS module.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
