Remove use of `ip multicast rpf-lookup-mode` from unrelated tests.
Looks like this test was just unlucky enough to pick that command as an
example for use here. Just changed it to something less likely to be
removed in the future.
Update route table output to include AFI SAFI output.
Signed-off-by: Nathan Bahr <nbahr@atcorp.com>
Add the abilty to track how much time is spent in routemaps.
Example of the new output:
eva# show route-map
ZEBRA:
route-map: FOO Invoked: 1000000 (323 milliseconds total) Optimization: enabled Processed Change: false
deny, sequence 10 Invoked 1000000 (320 milliseconds total)
Match clauses:
Set clauses:
Call clause:
Action:
Exit routemap
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
All routes received by zebra from upper level protocols have a weight
of 1. Let's just make everything extremely consistent in our code.
Lot's of tests needed to be fixed up to make this work.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The current OSPF neighbor retransmission operates on a single per-neighbor
periodic timer that sends all LSAs on the list when it expires.
Additionally, since it skips the first retransmission of received LSAs so
that at least the retransmission interval (resulting in a delay of between
the retransmission interval and twice the interval. In environments where
the links are lossy on P2MP networks with "delay-reflood" configured (which
relies on neighbor retransmission in partial meshs), the implementation
is sub-optimal (to say the least).
This commit reimplements OSPF neighbor retransmission as follows:
1. A new data structure making use the application managed
typesafe.h doubly linked list implements an OSPF LSA
list where each node includes a timestamp.
2. The existing neighbor LS retransmission LSDB data structure
is augmented with a pointer to the list node on the LSA
list to faciliate O(1) removal when the LSA is acknowledged.
3. The neighbor LS retransmission timer is set to the expiration
timer of the LSA at the top of the list.
4. When the timer expires, LSAs are retransmitted that within
the window of the current time and a small delta (50 milli-secs
default). The LSAs that are retransmited are given an updated
retransmission time and moved to the end of the LSA list.
5. Configuration is added to set the "retransmission-window" to a
value other than 50 milliseconds.
6. Neighbor and interface LSA retransmission counters are added
to provide insight into the lossiness of the links. However,
these will increment quickly on non-fully meshed P2MP networks
with "delay-reflood" configured.
7. Added a topotest to exercise the implementation on a non-fully
meshed P2MP network with "delay-reflood" configured. The
alternative was to use existing mechanisms to instroduce loss
but these seem less determistic in a topotest.
Signed-off-by: Acee Lindem <acee@lindem.com>
Add a new flag BGP_PATH_UNSORTED to keep track
of sorted -vs- unsorted path_info's. Add some
ability to the system to understand when that
flag is set.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The vrf name was not being displayed in this output.
New output:
eva# show bgp vrf all ipv4 uni summ
BGP router identifier 0.0.0.0, local AS number 99 VRF RED vrf-id 14
BGP table version 0
RIB entries 0, using 0 bytes of memory
Peers 1, using 20 KiB of memory
Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd PfxSnt Desc
192.168.119.1 4 0 0 0 0 0 0 never Active 0 N/A
Total number of neighbors 1
BGP router identifier 0.0.0.0, local AS number 99 VRF GREEN vrf-id 15
BGP table version 0
RIB entries 0, using 0 bytes of memory
Peers 1, using 20 KiB of memory
Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd PfxSnt Desc
192.168.119.1 4 0 0 0 0 0 0 never Active 0 N/A
Total number of neighbors 1
BGP router identifier 192.168.122.1, local AS number 99 VRF default vrf-id 0
BGP table version 0
RIB entries 0, using 0 bytes of memory
Peers 1, using 20 KiB of memory
Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd PfxSnt Desc
192.168.119.1 4 0 0 0 0 0 0 never Active 0 N/A
Total number of neighbors 1
BGP router identifier 0.0.0.0, local AS number 99 VRF GrEEn vrf-id -1
BGP table version 0
RIB entries 0, using 0 bytes of memory
Peers 1, using 20 KiB of memory
Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd PfxSnt Desc
192.168.119.1 4 0 0 0 0 0 0 never Idle 0 N/A
Total number of neighbors 1
eva#
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Don't use 'interface WORD area A.B.C.D' for enabling OSPFv3 areas on
interfaces and instead use the standardized 'ipv6 ospf6 area A.B.C.D'.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Create Local routes in FRR:
S 0.0.0.0/0 [1/0] via 192.168.119.1, enp39s0, weight 1, 00:03:46
K>* 0.0.0.0/0 [0/100] via 192.168.119.1, enp39s0, 00:03:51
O 192.168.119.0/24 [110/100] is directly connected, enp39s0, weight 1, 00:03:46
C>* 192.168.119.0/24 is directly connected, enp39s0, 00:03:51
L>* 192.168.119.224/32 is directly connected, enp39s0, 00:03:51
O 192.168.119.229/32 [110/100] via 0.0.0.0, enp39s0 inactive, weight 1, 00:03:46
C>* 192.168.119.229/32 is directly connected, enp39s0, 00:03:46
Create ability to redistribute local routes.
Modify tests to support this change.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
1. Renamed "gates" to "nexthops"
2. Displaying afi of the nexthops being dispalyed in place of
"nexthops" JSON object in the old JSON output
3. Calling show_route_nexthop_helper() and show_nexthop_json_helper()
instead of print_nh() inorder to keeps the fields in "nexthops"
JSON object in sync with "nexthops" JSON object of
"show nexthop-group rib json".
Updated vtysh:
r1# show ip nht
192.168.0.2
resolved via connected
is directly connected, r1-eth0 (vrf default)
Client list: static(fd 28)
192.168.0.4
resolved via connected
is directly connected, r1-eth0 (vrf default)
Client list: static(fd 28)
Updated JSON:
r1# show ip nht json
{
"default":{
"ipv4":{
"192.168.0.2":{
"nhtConnected":false,
"clientList":[
{
"protocol":"static",
"socket":28,
"protocolFiltered":"none"
}
],
"nexthops":[
{
"flags":3,
"fib":true,
"directlyConnected":true,
"interfaceIndex":2,
"interfaceName":"r1-eth0",
"vrf":"default",
"active":true
}
],
"resolvedProtocol":"connected"
}
}
}
}
Signed-off-by: Pooja Jagadeesh Doijode <pdoijode@nvidia.com>
Column headers in BGP routes table are not aligned with data when
RPKI status is available. This was fixed to insert a space at the
beginning of the header and at the beginning of lines that do not
have RPKI status.
This fix requires that several testing templates be adjusted to
match the new output.
Signed-off-by: Wayne Morrison <wmorrison@netgate.com>
Debugs take up a significant amount of cpu time as well as
increased disk space for storage of results. Reduce test
over head by removing the debugs, Hopefully this helps
alleviate some of the overloading that we are seeing in
our CI systems.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Change every `-` to `_` in directory names. This is to avoid mixing _ and -.
Just for consistency and directory sorting properly.
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
