- gre keys are collected and stored locally.
- when gre source set is requested, and the link interface
configured is different, the gre information collected is
pushed in the query, namely source ip or gre keys if present.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
preserve mtu upon interface flapping and tunnel source change.
Signed-off-by:Reuben Dowle <reuben.dowle@4rf.com>
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
This action is initiated by nhrp and has been stubbed when
moving to zebra. Now, a netlink request is forged to set
the link interface of a gre interface if that gre interface
does not have already a link interface.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Use the main zebra workqueue for daemon-owned NHGs, in addition
to processing kernel-owned NHGs. The zapi message processing
creates a temporary object that's enqueued to the workqueue,
then processed/installed as part of the workqueue processing.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
zapi_nbr structure is renamed to zapi_neigh_ip.
Initially used to set a neighbor ip entry for gre interfaces, this
structure is used to get events from the zebra layer to nhrp layer.
The ndm state has been added, as it is needed on both sides.
The zebra dplane layer is slightly modified.
Also, to clarify what ZEBRA_NEIGH_ADD/DEL means, a rename is done:
it is called now ZEBRA_NEIGH_IP_ADD/DEL, and it signified that this
zapi interface permits to set link operations by associating ip
addresses to link addresses.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Instead of directly configuring the neighbor table after read from zapi
interface, a zebra dplane context is prepared to host the interface and
the family where the neighbor table is updated. Also, some other fields
are hosted: app_probes, ucast_probes, and mcast_probes. More information
on those fields can be found on ip-ntable configuration.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
EVPN neighbor operations were already done in the zebra dataplane
framework. Now that NHRP is able to use zebra to perform neighbor IP
operations (by programming link IP operations), handle this operation
under dataplane framework:
- assign two new operations NEIGH_IP_INSTALL and NEIGH_IP_DELETE; this
is reserved for GRE like interfaces:
example: ip neigh add A.B.C.D lladdr E.F.G.H
- use 'struct ipaddr' to store and encode the link ip address
- reuse dplane_neigh_info, and create an union with mac address
- reuse the protocol type and use it for neighbor operations; this
permits to store the daemon originating this neighbor operation.
a new route type is created: ZEBRA_ROUTE_NEIGH.
- the netlink level functions will handle a pointer, and a type; the
type indicates the family of the pointer: AF_INET or AF_INET6 if the
link type is an ip address, mac address otherwise.
- to keep backward compatibility with old queries, as no extension was
done, an option NEIGH_NO_EXTENSION has been put in place
- also, 2 new state flags are used: NUD_PERMANENT and NUD_FAILED.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
neighbor table api in zebra is added. a netlink api is created for that.
the handler is called from the api defined in the previous commit.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
a zebra api is extended to offer ability to add or remove neighbor
entry from daemon. Also this extension makes possible to add neigh
entry, not only between IPs and macs, but also between IPs and NBMA IPs.
This API supports configuring ipv6/ipv4 entries with ipv4/ipv6 lladdr.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
zebra implements zebra api for configuring link layer information. that
can be an arp entry (for ipv4) or ipv6 neighbor discovery entry. This
can also be an ipv4/ipv6 entry associated to an underlay ipv4 address,
as it is used in gre point to multipoint interfaces.
this api will also be used as monitoring. an hash list is instantiated
into zebra (this is the vrf bitmap). each client interested in those entries
in a specific vrf, will listen for following messages: entries added, removed,
or who-has messages.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
EVPN nexthops are installed as remote neighs by zebra. This was earlier
done only via VRF IPvX uni routes imported from EVPN routes.
With EVPN-MH these VRF routes now reference a L3NHG which is setup based
on the EAD and doesn't include the RMAC. To workaround that BGP now
consolidates and maintains EVPN nexthops which are then sent to zebra.
zebra sets up these nexthops as L3-VNI nh entries using a dummy type-1
route as reference.
Ticket: CM-31398
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
This one also needed a bit of shuffling around, but MTYPE_RE is the only
one left used across file boundaries now.
Signed-off-by: David Lamparter <equinox@diac24.net>
like it has been done for iptable contexts, a zebra dplane context is
created for each ipset/ipset entry event. The zebra_dplane_ctx job is
then enqueued and processed by separate thread. Like it has been done
for zebra_pbr_iptable context, the ipset and ipset entry contexts are
encapsulated into an union of structures in zebra_dplane_ctx.
There is a specificity in that when storing ipset_entry structure, there
was a backpointer pointer to the ipset structure that is necessary
to get some complementary information before calling the hook. The
proposal is to use an ipset_entry_info structure next to the ipset_entry,
in the zebra_dplane context. That information is used for ipset_entry
processing. The ipset name and the ipset type are the only fields
necessary.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
The iptable processing was not handled in remote dataplane, and was
directly processed by the thread in charge of zapi calls. Now that call
can be handled in the zebra_dplane separate thread. once a
zebra_dplane_ctx is allocated for iptable handling, the hook call is
performed later. Subsequently, a return code may be triggered to zclient
interface if any problem occurs when calling the hook call.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Neither tabs nor newlines are acceptable in syslog messages. They also
break line-based parsing of file logs.
Signed-off-by: David Lamparter <equinox@diac24.net>
valgrind is reporting:
2448137-==2448137== Thread 5 zebra_apic:
2448137-==2448137== Syscall param writev(vector[...]) points to uninitialised byte(s)
2448137:==2448137== at 0x4D6FDDD: __writev (writev.c:26)
2448137-==2448137== by 0x4D6FDDD: writev (writev.c:24)
2448137-==2448137== by 0x48A35F5: buffer_flush_available (buffer.c:431)
2448137-==2448137== by 0x48A3504: buffer_flush_all (buffer.c:237)
2448137-==2448137== by 0x495948: zserv_write (zserv.c:263)
2448137-==2448137== by 0x4904B7E: thread_call (thread.c:1681)
2448137-==2448137== by 0x48BD3E5: fpt_run (frr_pthread.c:308)
2448137-==2448137== by 0x4C61EA6: start_thread (pthread_create.c:477)
2448137-==2448137== by 0x4D78DEE: clone (clone.S:95)
2448137-==2448137== Address 0x720c3ce is 62 bytes inside a block of size 4,120 alloc'd
2448137:==2448137== at 0x483877F: malloc (vg_replace_malloc.c:307)
2448137-==2448137== by 0x48D2977: qmalloc (memory.c:110)
2448137-==2448137== by 0x48A30E3: buffer_add (buffer.c:135)
2448137-==2448137== by 0x48A30E3: buffer_put (buffer.c:161)
2448137-==2448137== by 0x49591B: zserv_write (zserv.c:256)
2448137-==2448137== by 0x4904B7E: thread_call (thread.c:1681)
2448137-==2448137== by 0x48BD3E5: fpt_run (frr_pthread.c:308)
2448137-==2448137== by 0x4C61EA6: start_thread (pthread_create.c:477)
2448137-==2448137== by 0x4D78DEE: clone (clone.S:95)
2448137-==2448137== Uninitialised value was created by a stack allocation
2448137:==2448137== at 0x43E490: zserv_encode_vrf (zapi_msg.c:103)
Effectively we are sending `struct vrf_data` without ensuring
data has been properly initialized.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Send the results of daemons' nhg updates asynchronously,
after the update has actually completed. Capture additional
info about the source daemon in order to locate the correct
zapi session. Simplify the result types considered by the
zebra_nhg module.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
The raw zapi apis to encode and decode NHGs don't need to be
public; also add a little more validity-checking.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Following functions is using writen to dispatch message
into socket, but another function uses zserv_send_message.
This commit does tiny unification for zapi's socket messaging.
Funcs:
- zsend_assign_label_chunk_response()
- zsend_label_manager_connect_response()
Signed-off-by: Hiroki Shirokura <slank.dev@gmail.com>
Just gather the opaque data into the route entry. Later
commits will display this data for end users as well as
to send it down.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Issue:
The bgp routes learnt from peers which are not installed in kernel are
advertised to peers. This can cause routers to send traffic to these
destinations only to get dropped. The fix is to provide a configurable
option "bgp suppress-fib-pending". When the option is enabled, bgp will
advertise routes only if it these are successfully installed in kernel.
Fix (Part1) :
* Added message ZEBRA_ROUTE_NOTIFY_REQUEST used by client to request
FIB install status for routes
* Added AFI/SAFI to ZAPI messages
* Modified the functions zapi_route_notify_decode(), zsend_route_notify_owner()
and route_notify_internal() to include AFI, SAFI as parameters
Signed-off-by: kssoman <somanks@gmail.com>
Only set the NHG/backup NHG pointers of the caller if the read
of the nexthops was successfull. Otherwise, we might free when not
neccessary or double free.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Add the zapi code for encoding/decoding of backup nexthops for when
we are ready for it, but disable it for now so that we revert
to the old way with them.
When zebra gets a proto-NHG with a backup in it, we early fail and
tell the upper level proto. In this case sharpd. Sharpd then reverts
to the old way of installation with the route.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Add type to the nhg_proto_del API params for sanity checking
that the types of the route sent by the proto matches the type
found with the ID.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Clean up the function names and remove some TODOs that are no
longer needed/hacks we used for testing.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Get the multipath number checks working with proto-based NHG
message decoding in zapi_msg.c
Modify the function that checks this for routes to work without
being passed a prefix as is the case with NHG creates.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Make the message parameters align better with other zapi
notifications and change the ID to correctly be a uint32.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Fix some reference counting issues seen when replacing
a NHG and deleting one.
For replacement, we should end with the same refcnt on the new
one.
For delete, its the caller's job to decrement its ref after
its done with it.
Further, update routes in the rib with the new pointer after replace.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
When we add a proto NHG, increment the refcount, when
we del a proto NHG, decrement the refcount rather than
deleting it explicitly. If the upper level proto is handling
it properly, it should get decremented to zero when we
receive a NHG del.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Fix check in zread where we determine validity of a route
based on reading in nexthops/checking ID is present.
We had a bad conditional that was determining a route
is bad if its not NHG ID based.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
We were hard coding proto bgp for use with the NHG creation.
Use the actual passed one from zapi now that it exists.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Add code to properly handle routes sent with NHG ID rather
than a nexthop_group.
For now, we separate this from backup nexthop handling since that
should probably be added to the nhg_proto_add calls.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Implement the underlying zebra functionality to Add/Del an
internal zebra and kernel NHG.
These NHGs are managed by the upperlevel protocols that send them
down via zapi messaging.
They are not put into the overall zebra NHG hash table and only
put into to the ID table. Therefore, different protos cannot
and will not share NHGs.
The proto is also set appropriately when sent to the kernel.
Expand the separation of Zebra hashed/shared/created NHGs and
proto created and mangaged NHGs.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Modify the send down of a route to use the nexthop group id
if we have one associated with the route.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Add the ability to send a NHG from an upper level protocol down to
zebra. ZAPI_NHG_ADD encompasses both the addition and replace
semantics ( If the id passed down does not exist yet, it's Add,
else it's a replace ).
Effectively zebra will take this nhg passed down save the nhg
in the id hash for nhg's and then create the appropriate nhg's
and finally install them into the linux kernel. Notification
will be the ZAPI_NHG_NOTIFY_OWNER zapi message for normal
success/failure messaging to the installing protocol.
This work is being done to allow us to work with EVPN MH
which needs the ability to modify NHG's that BGP will own
and operate on.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Take the zebra code that reads nexthops and combine it
into one function so that when we add zapi messages
to send/receive nexthops we can take advantage of this function.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When installing rules pass by the interface name across
zapi.
This is being changed because we have a situation where
if you quickly create/destroy ephermeal interfaces under
linux the upper level protocol may be trying to add
a rule for a interface that does not quite exist
at the moment. Since ip rules actually want the
interface name ( to handle just this sort of situation )
convert over to passing the interface name and storing
it and using it in zebra.
Ticket: CM-31042
Signed-off-by: Stephen Worley <sworley@nvidia.com>
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
