When browsing or parsing OSPF LSA TLVs, we need to use the LSA length which is
part of the LSA header. This length, encoded in 16 bits, must be first
converted to host byte order with ntohs() function. However, Coverity Scan
considers that ntohs() function return TAINTED data. Thus, when the length is
used to control for() loop, Coverity Scan marks this part of the code as defect
with "Untrusted Loop Bound" due to the usage of Tainted variable. Similar
problems occur when browsing sub-TLV where length is extracted with ntohs().
To overcome this limitation, a size attribute has been added to the ospf_lsa
structure. The size is set when lsa->data buffer is allocated. In addition,
when an OSPF packet is received, the size of the payload is controlled before
contains is processed. For OSPF LSA, this allow a secure buffer allocation.
Thus, new size attribute contains the exact buffer allocation allowing a
strict control during TLV browsing.
This patch adds extra control to bound for() loop during TLV browsing to
avoid potential problem as suggested by Coverity Scan. Controls are based
on new size attribute of the ospf_lsa structure to avoid any ambiguity.
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
Store instance index at startup and use it when processing vty commands.
The instance itself may be created and deleted by the user in runtime
using `[no] router ospf X` command.
Fixes#7908
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Description:
Added the following debug commands to enable debugs
GR helper functionality.
[no] debug ospf gr helper
Signed-off-by: Rajesh Girada <rgirada@vmware.com>
Default originate with route-map was broken. Routemap
was not getting applied for redistribute route but was
getting applied default route itself. No default route
was originated even when routemap was satisfied.
Signed-off-by: Santosh P K <sapk@vmware.com>
Replace sprintf with snprintf where straightforward to do so.
- sprintf's into local scope buffers of known size are replaced with the
equivalent snprintf call
- snprintf's into local scope buffers of known size that use the buffer
size expression now use sizeof(buffer)
- sprintf(buf + strlen(buf), ...) replaced with snprintf() into temp
buffer followed by strlcat
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
And again for the name. Why on earth would we centralize this, just so
people can forget to update it?
Signed-off-by: David Lamparter <equinox@diac24.net>
There is really no reason to not put this in the cmd_node.
And while we're add it, rename from pointless ".func" to ".config_write".
[v2: fix forgotten ldpd config_write]
Signed-off-by: David Lamparter <equinox@diac24.net>
The only nodes that have this as 0 don't have a "->func" anyway, so the
entire thing is really just pointless.
Signed-off-by: David Lamparter <equinox@diac24.net>
Turning on packet debugs and seeing a header dump that is 11
lines long is useless
2019/11/07 01:07:05.941798 OSPF: ip_v 4
2019/11/07 01:07:05.941806 OSPF: ip_hl 5
2019/11/07 01:07:05.941813 OSPF: ip_tos 192
2019/11/07 01:07:05.941821 OSPF: ip_len 68
2019/11/07 01:07:05.941831 OSPF: ip_id 48576
2019/11/07 01:07:05.941838 OSPF: ip_off 0
2019/11/07 01:07:05.941845 OSPF: ip_ttl 1
2019/11/07 01:07:05.941857 OSPF: ip_p 89
2019/11/07 01:07:05.941865 OSPF: ip_sum 0xcf33
2019/11/07 01:07:05.941873 OSPF: ip_src 200.254.30.14
2019/11/07 01:07:05.941882 OSPF: ip_dst 224.0.0.5
We already have this debugged, it's not going to change and the
end developer can stick this back in if needed by hand to debug
something that is not working properly.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The following types are nonstandard:
- u_char
- u_short
- u_int
- u_long
- u_int8_t
- u_int16_t
- u_int32_t
Replace them with the C99 standard types:
- uint8_t
- unsigned short
- unsigned int
- unsigned long
- uint8_t
- uint16_t
- uint32_t
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Following various review, following files have been modfied:
- All: Change u_intXX_t typedef to standard uintXX_t types
- doc/OSPF-SR.rst: Update doc in particular the Linux Kernel configuration
section
- doc/ospfd.texi: Update CLI
- ospfd/ospf_dump.[c,h]: Add new 'debug ospf sr' when performing 'sh run'
- ospfd/ospf_ext.[c, h]: Various bug corrections notably to handle flooding of
Extended Prefix at startup. iFix TLVs size for LAN Adjacency.
Update Licence as per Community.md
- ospfd/ospf_opaque.c: Add proper termination function call to remove MPLS entries
- ospfd/ospf_ri.[c,h]: Bug corrections
- ospfd/ospf_sr.[c,h]: Various bug corrections, notably to determine the nexthop
SR Node. Add support to 'no-php-flag'.
Update Licence as per Community.md
- ospfd/ospfd.c: Add call to 'ospf_opaque_term()'
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
This is an implementation of draft-ietf-ospf-segment-routing-extensions-24
and RFC7684 for Extended Link & Prefix Opaque LSA.
Look to doc/OSPF_SR.rst for implementation details & known limitations.
New files:
- ospfd/ospf_sr.h: Segment Routing structure definition (SubTLVs + SRDB)
- ospfd/ospf_sr.c: Main functions for Segment Routing support
- ospfd/ospf_ext.h: TLVs and SubTLVs definition for RFC7684
- ospfd/ospf_ext.c: RFC7684 Extended Link / Prefix implementation
- doc/OSPF-SRr.rst: Documentation
Modified Files:
- doc/ospfd.texi: Add new Segment Routing CLI command definition
- lib/command.h: Add new string command for Segment Routing CLI
- lib/mpls.h: Add default value for SRGB
- lib/route_types.txt: Add new OSPF Segment Routing route type
- ospfd/ospf_dump.[c,h]: Add OSPF SR debug
- ospfd/ospf_memory.[c,h]: Add new Segment Routing memory type
- ospfd/ospf_opaque.[c,h]: Add ospf_sr_init() starting function
- ospfd/ospf_ri.c: Add new functions to Set/Get Segment Routing TLVs
Add new ospf_router_info_lsa_upadte() to send Opaque LSA to ospf_sr.c()
- ospfd/ospf_ri.h: Add new Router Information SR SubTLVs
- ospfd/ospf_spf.c: Add new scheduler when running SPF to trigger
update of NHLFE
- ospfd/ospfd.h: Add new thread for Segment Routing scheduler
- ospfd/subdir.am: Add new files
- vtysh/Makefile.am: Add new ospf_sr.c file for vtysh
- zebra/kernel_netlink.c: Add new OSPF_SR route type
- zebra/rt_netlink.[c,h]: Add new OSPF_SR route type
- zebra/zebra_mpls.h: Add new OSPF_SR route type
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
Some of the deprecated stream.h macros see such little use that we may
as well just remove them and use the non-deprecated macros.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Handle all instance base clis calling ospf_lookup_instance()
to return CMD_NOT_MY_INSTANCE in case of ospf is not found.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
log.c provides functionality for associating a constant (typically a
protocol constant) with a string and finding the string given the
constant. However this is highly delicate code that is extremely prone
to stack overflows and off-by-one's due to requiring the developer to
always remember to update the array size constant and to do so correctly
which, as shown by example, is never a good idea.b
The original goal of this code was to try to implement lookups in O(1)
time without a linear search through the message array. Since this code
is used 99% of the time for debugs, it's worth the 5-6 additional cmp's
worst case if it means we avoid explitable bugs due to oversights...
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
The FSF's address changed, and we had a mixture of comment styles for
the GPL file header. (The style with * at the beginning won out with
580 to 141 in existing files.)
Note: I've intentionally left intact other "variations" of the copyright
header, e.g. whether it says "Zebra", "Quagga", "FRR", or nothing.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
The OSPF API-client library doesn't really use anything from libospf
except some small dumping tools. Isolate these into a separate file
and detangle the ospfapiclient library.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This ditches tv_add, tv_sub, tv_cmp, etc. in favour of
monotime{,_since,_until}() which actually makes the code much more
readable in some locations.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
