The right way to implement this command in vtysh is the following:
* Send the command to each running FRR daemon;
* Collect the command output from each daemon;
* Parse the text outputs into libyang lyd_node structures. Then merge
all these data trees into a single one. Finally, print the merged
data trees to the standard output (libyang will take care of
combining duplicate nodes as necessary).
What this commit does is to allow vtysh to send the "show yang
operational-data" command to a single daemon only (the last
parameter). It's a quick workaround to allow us to write topotests
using YANG-modeled data until we do the real thing (full vtysh
northbound integration).
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
The new "adjacency-state" grouping is almost a 1:1 copy of the
same grouping from the IETF IS-IS module, except for the "usage"
and "lastuptime" leafs that were skipped (more work needs to be
done to support those).
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
This command is defined in the lib/northbound_cli.c file, which
is not being parsed by vtysh since most commands from there need
special handling in the context of vtysh. The "debug northbound"
command, however, can be made available to vtysh without problems.
Introduce a new DEFUNSH to do that.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Do this to better separate config data from state data (coming in
the next commits) like done in the IETF IS-IS module.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
RFC 4271 sec 6.3 p33, In the case of a BGP_NEXTHOP attribute with an
incorrect value, FRR is supposed to send a notification
and include 'Corresponding type, length and value of the NEXT_HOP
attribute in the notification data.
Fixes: #4997
Signed-off-by: Nikos <ntriantafillis@gmail.com>
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Update neighbor entries and rule entries to have the RTPROT_ZEBRA
protocol value. So we can tell where things come from.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
For all the places we have a zclient->interface_up convert
them to use the interface ifp_up callback instead.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Switch the zclient->interface_add functionality to have everyone
use the interface create callback in lib/if.c
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Start the conversion to allow zapi interface callbacks to be
controlled like vrf creation/destruction/change callbacks.
This will allow us to consolidate control into the interface.c
instead of having each daemon read the stream and react accordingly.
This will hopefully reduce a bunch of cut-n-paste stuff
Create 4 new callback functions that will be controlled by
lib/if.c
create -> A upper level protocol receives an interface creation event
The ifp is brand spanking newly created in the system.
up -> A upper level protocol receives a interface up event
This means the interface is up and ready to go.
down -> A upper level protocol receives a interface down
destroy -> A upper level protocol receives a destroy event
This means to delete the pointers associated with it.
At this point this is just boilerplate setup for future commits.
There is no new functionality.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When zebra gets a callback from the kernel that an interface has
actually been deleted *and* the end users has not configured
the interface, then allow for deletion of the interface from zebra.
This is especially important in a docker environment where containers
and their veth interfaces are treated as ephermeal. FRR can quickly
have an inordinate amount of interfaces sitting around that are
not in the kernel and we have no way to clean them up either.
My expectation is that this will cause a second order crashes
in upper level protocols, but I am not sure how to catch these
and fix them now ( suggestions welcome ). There are too many
use patterns and order based events that I cannot know for certain
that we are going to see any at all, until someone sees this problem
as a crash :( I do not recommend that this be put in the current
stabilization branch and allow this to soak in master for some time
first.
Testing:
sharpd@donna ~/frr4> sudo ip link add vethdj type veth peer name vethjd
sharpd@donna ~/frr4> sudo ip link add vethaa type veth peer name vethab
sharpd@donna ~/frr4> sudo vtysh -c "show int brief"
Interface Status VRF Addresses
--------- ------ --- ---------
dummy1 down default
enp0s3 up default 10.0.2.15/24
enp0s8 up default 192.168.209.2/24
enp0s9 up default 192.168.210.2/24
enp0s10 up default 192.168.212.4/24
lo up default 10.22.89.38/32
vethaa down default
vethab down default
vethdj down default
vethjd down default
virbr0 up default 192.168.122.1/24
virbr0-nic down default
sharpd@donna ~/frr4> sudo ip link set vethaa up
sharpd@donna ~/frr4> sudo ip link set vethab up
sharpd@donna ~/frr4> sudo ip link del vethdj
sharpd@donna ~/frr4> sudo vtysh -c "show int brief"
Interface Status VRF Addresses
--------- ------ --- ---------
dummy1 down default
enp0s3 up default 10.0.2.15/24
enp0s8 up default 192.168.209.2/24
enp0s9 up default 192.168.210.2/24
enp0s10 up default 192.168.212.4/24
lo up default 10.22.89.38/32
vethaa up default
vethab up default
virbr0 up default 192.168.122.1/24
virbr0-nic down default
sharpd@donna ~/frr4> sudo ip link del vethaa
sharpd@donna ~/frr4> sudo vtysh -c "show int brief"
Interface Status VRF Addresses
--------- ------ --- ---------
dummy1 down default
enp0s3 up default 10.0.2.15/24
enp0s8 up default 192.168.209.2/24
enp0s9 up default 192.168.210.2/24
enp0s10 up default 192.168.212.4/24
lo up default 10.22.89.38/32
virbr0 up default 192.168.122.1/24
virbr0-nic down default
sharpd@donna ~/frr4> sudo ip link add vethaa type veth peer name vethab
sharpd@donna ~/frr4> sudo vtysh -c "show int brief"
Interface Status VRF Addresses
--------- ------ --- ---------
dummy1 down default
enp0s3 up default 10.0.2.15/24
enp0s8 up default 192.168.209.2/24
enp0s9 up default 192.168.210.2/24
enp0s10 up default 192.168.212.4/24
lo up default 10.22.89.38/32
vethaa down default
vethab down default
virbr0 up default 192.168.122.1/24
virbr0-nic down default
sharpd@donna ~/frr4> sudo vtysh -c "show run"
Building configuration...
Current configuration:
!
frr version 7.2-dev
frr defaults datacenter
hostname donna.cumulusnetworks.com
log stdout
no ipv6 forwarding
!
ip route 192.168.3.0/24 192.168.209.1
ip route 192.168.4.0/24 blackhole
ip route 192.168.5.0/24 192.168.209.1
ip route 192.168.6.0/24 192.168.209.1
ip route 192.168.7.0/24 99.99.99.99 nexthop-vrf EVA
ip route 192.168.8.0/24 192.168.209.1
ip route 4.5.6.7/32 12.13.14.15
!
interface dummy1
ip address 12.13.14.15/32
!
interface vethaa
description FROO
!
line vty
!
end
sharpd@donna ~/frr4> sudo ip link del vethaa
sharpd@donna ~/frr4> sudo vtysh -c "show int brief"
Interface Status VRF Addresses
--------- ------ --- ---------
dummy1 down default
enp0s3 up default 10.0.2.15/24
enp0s8 up default 192.168.209.2/24
enp0s9 up default 192.168.210.2/24
enp0s10 up default 192.168.212.4/24
lo up default 10.22.89.38/32
vethaa down default
virbr0 up default 192.168.122.1/24
virbr0-nic down default
sharpd@donna ~/frr4> sudo vtysh -c "show run"
Building configuration...
Current configuration:
!
frr version 7.2-dev
frr defaults datacenter
hostname donna.cumulusnetworks.com
log stdout
no ipv6 forwarding
!
ip route 192.168.3.0/24 192.168.209.1
ip route 192.168.4.0/24 blackhole
ip route 192.168.5.0/24 192.168.209.1
ip route 192.168.6.0/24 192.168.209.1
ip route 192.168.7.0/24 99.99.99.99 nexthop-vrf EVA
ip route 192.168.8.0/24 192.168.209.1
ip route 4.5.6.7/32 12.13.14.15
!
interface dummy1
ip address 12.13.14.15/32
!
interface vethaa
description FROO
!
line vty
!
end
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
We were storing the interface description irrelevant of whether
or not it was a newlink or dellink. This makes no sense.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This change addresses the following :
1. Ensures zlog_debug should be under DEBUG macro check
2. Ensures zlog_err and zlog_warn wherever applicable.
3. Removed few posivite logs from fpm handling, whose frequency is high.
Signed-off-by: vishaldhingra <vdhingra@vmware.com>
Fixed the following:
1. Print the complete header for 'show bgp l2vpn evpn' command
2. Print the Route Distinguisher header
3. Print all relevant routes in json (some were being skipped)
Signed-off-by: Kishore Aramalla <karamalla@vmware.com>
During initialization, the northbound detects if any required
callback is missing (fatal error) or if any unneeded callback is
present (warning).
There are three callbacks, however, that should require special
handling: get_next(), get_keys() and lookup_entry().
These callbacks are normally unneeded for configuration lists. But,
if a configuration list is augmented with new state nodes by another
module, then the three callbacks mentioned above become required. In
this case, never log a warning when these callbacks are implemented
when they are not needed, since this depends on context (e.g. some
daemons might augment "frr-interface" while others don't).
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
When a configuration transaction is being performed, the northbound
uses a red-black tree to store the configuration changes that need to
be processed. The problem is that we were sorting the configuration
changes based on their XPaths (and callback priorities). This means
the original order of the changes wasn't being respected, which is
a problem for lists that use the "ordered-by user" statement. To
fix this, add a new "seq" member to the "nb_config_cb" structure
so that we can preserve the order of the configuration changes as
told by libyang.
Since none of the FRR modules use "ordered-by user" lists so far,
no daemon was affected by this problem.
Reported-by: Martin Winter <mwinter@opensourcerouting.org>
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
When updating the XPath during the iteration of operational data,
include the namespace of the augmenting module when necessary.
Reported-by: Quentin Young <qlyoung@cumulusnetworks.com>
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Adding a lock to protect the global running configuration doesn't
help much since the FRR daemons are not prepared to process
configuration changes in a pthread that is not the main one (a
whole lot of new protections would be necessary to prevent race
conditions).
This means the lock added by commit 83981138 only adds more
complexity for no benefit. Remove it now to simplify the code.
All northbound clients, including the gRPC one, should either run
in the main pthread or use synchronization primitives to process
configuration transactions in the main pthread.
This reverts commit 83981138fe.
This callback can be used to validate subsections of the
configuration being committed before validating the configuration
changes themselves. It's useful to perform more complex validations
that depend on the relationship between multiple nodes.
Only YANG-level validation (performed by libyang) and the
NB_EV_VALIDATE validation (that can be used to validate individual
configuration changes) proved to be insufficient in some cases.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
We had wrappers for IPv4 and IPv6 prefixes, but not for IP (version
agnostic) prefixes. This commit addresses this issue.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
when a client disconnects, we iterate over the routing table to
remove any label that originated from that client. However we
were erroneously passing the route type to the function, while
it was expecting the lsp type. As a result, for example, killing
ldpd would not remove the ldp labels from the routes.
Kudos to @rwestphal for pointing me to the source of the issue.
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
Modification of the documentation for the `ip pim sm` command in order to avoid the understanding of an incompatibility with IGMP on the interface.
Signed-off-by: Alexis Royer <alexis.royer@gmail.com>
speed interface is done 15 seconds after interface creation. during that
time, the vrf or the interface may have disappeared. to protect this,
return an error in case it is not possible to create a vrf socket or it
is not possible to get speed of an interface because of a missing
device.
Signed-off-by: Julien Floret <julien.floret@6wind.com>
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
