Problem reported that when a "neighbor x.x.x.x route-map FOO in"
set a next-hop value, that modified next-hop value was also sent
to eBGP peers. This is incorrect since bgp is expected to set
next-hop to self when sending to eBGP peers unless third party
next-hop on a shared segment is true. This fix modifies the
behavior to stop sending the modified next-hop to eBGP peers
if the route-map was applied inbound on another peer.
Ticket: CM-26025
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
The newly added PEER_RMAP_TYPE_AGGREGATE flag is setup to
be the 9th bit:
But the flag we are putting it into:
uint8_t rmap_type;
is 8 bits. Adjust the size.
Found by Coverity SA Scan
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
While configuring aggregate route prepare the hash table first,
then prepare the aggregated aspath value just like lcomm,
ecomm and standard community.
Signed-off-by: vishaldhingra<vdhingra@vmware.com>
While configuring aggregate route prepare the hash table first,
then prepare the aggregated ecomm value and then do the
unique sort once for ecommunity.
Signed-off-by: vishaldhingra<vdhingra@vmware.com>
While configuring aggregate route prepare the hash table
first, then prepare the aggregated standard comm value
and then do the unique sort once for standard community.
Signed-off-by: vishaldhingra<vdhingra@vmware.com>
While configuring aggregate route prepare the hash table first,
then prepare the aggregated lcomm value and then do the unique
sort once for large community.
Signed-off-by: vishaldhingra <vdhingra@vmware.com>
Include the coalesce time for the update group `show bgp update-group`
command as well as print out how long the coalesce timer waited
for on the timer pop.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The peer's outgoing routemap should not be displaying a 'X'
appended to the front of the name. This will create
confusion.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
RFC 4271 sec 6.3 p33, In the case of a BGP_NEXTHOP attribute with an
incorrect value, FRR is supposed to send a notification
and include 'Corresponding type, length and value of the NEXT_HOP
attribute in the notification data.
Fixes: #4997
Signed-off-by: Nikos <ntriantafillis@gmail.com>
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
For all the places we have a zclient->interface_up convert
them to use the interface ifp_up callback instead.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Switch the zclient->interface_add functionality to have everyone
use the interface create callback in lib/if.c
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Start the conversion to allow zapi interface callbacks to be
controlled like vrf creation/destruction/change callbacks.
This will allow us to consolidate control into the interface.c
instead of having each daemon read the stream and react accordingly.
This will hopefully reduce a bunch of cut-n-paste stuff
Create 4 new callback functions that will be controlled by
lib/if.c
create -> A upper level protocol receives an interface creation event
The ifp is brand spanking newly created in the system.
up -> A upper level protocol receives a interface up event
This means the interface is up and ready to go.
down -> A upper level protocol receives a interface down
destroy -> A upper level protocol receives a destroy event
This means to delete the pointers associated with it.
At this point this is just boilerplate setup for future commits.
There is no new functionality.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Fixed the following:
1. Print the complete header for 'show bgp l2vpn evpn' command
2. Print the Route Distinguisher header
3. Print all relevant routes in json (some were being skipped)
Signed-off-by: Kishore Aramalla <karamalla@vmware.com>
This is annoying when editing a file and saving the file. IDEs like
VSCode can automatically remove trailing whitespaces, hence it would be better
having a clean code before pushing other changes.
I step onto this not the first time.
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
RFC4271 specifies behavior when the hold timer is sent to zero - we
should not send keepalives or run a hold timer. But FRR, and other
vendors, allow the keepalive timer to be set to zero with a nonzero hold
timer. In this case we were sending keepalives constantly and maxing out
a pthread to do so. Instead behave similarly to other vendors and do not
send keepalives.
Unsure what the utility of this is, but blasting keepalives is
definitely the wrong thing to do.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
User pass the string match large-community 1 exact-match from CLI.
Now route map lib has got the string as "1 exact-match". It passes the string
to call back for compilation. BGP will parse this string and came to know
that for "1" it has to do exact match. Routemap lib has to save "1" in it’s
dependency table. Here routemap is saving this as a “1 exact-match”
which is wrong. The solution is used the compiled data.
Signed-off-by: vishaldhingra <vdhingra@vmware.com>
Allow bgp to set a local Administrative distance to use
for installing routes into the rib.
Example:
!
router bgp 9323
bgp router-id 1.2.3.4
neighbor enp0s8 interface remote-as external
!
address-family ipv4 unicast
neighbor enp0s8 route-map DISTANCE in
exit-address-family
!
route-map DISTANCE permit 10
set distance 153
!
line vty
!
end
eva# show ip route
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR, f - OpenFabric,
> - selected route, * - FIB route, q - queued route, r - rejected route
B 0.0.0.0/0 [153/0] via fe80::a00:27ff:fe84:c2d6, enp0s8, 00:00:06
K>* 0.0.0.0/0 [0/100] via 10.0.2.2, enp0s3, 00:06:31
B>* 1.1.1.1/32 [153/0] via fe80::a00:27ff:fe84:c2d6, enp0s8, 00:00:06
B>* 1.1.1.2/32 [153/0] via fe80::a00:27ff:fe84:c2d6, enp0s8, 00:00:06
B>* 1.1.1.3/32 [153/0] via fe80::a00:27ff:fe84:c2d6, enp0s8, 00:00:06
C>* 10.0.2.0/24 is directly connected, enp0s3, 00:06:31
K>* 169.254.0.0/16 [0/1000] is directly connected, enp0s3, 00:06:31
eva#
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
`set ipv6 next-hop prefer-global` is not working on IPv4 peers.
In MP-BGP, bgp routers can advertising IPv6 routes over IPv4 peers.
Remove the peer's remote address AFI type checking.
Signed-off-by: shikenghua <kh_shi@edge-core.com>
This is the unusual case when you have global IPv6 address and no link-local
on interface attached. Like here:
eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP
link/ether 08:00:27:65:c6:82 brd ff:ff:ff:ff:ff:ff
inet6 2a02:4780:face::1/64 scope global
valid_lft forever preferred_lft forever
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
This change addresses the following:
1) Ensures logs under DEBUG macro checks are categorized
as zlog_debug instead of zlog_info.
2) Error logs are categorized as zlog_err instead of zlog_info.
3) Rephrasing certain logs to make them appear more intuitive.
Signed-off-by: NaveenThanikachalam <nthanikachal@vmware.com>
When L3vni is created with prefix-only flag,
the flag is set at bgp vrf instance level.
In the case of bgp instance is non auto created,
means user configured instance (i.e 'router bgp x vrf <name>')
Upon deletion of l3vni, clear the prefix-only flag from
bgp vrf instance.
Ticket:CM-21894
Reviewed By:CCR-9176
Testing Done:
vrf vrf1
vni 104001
exit-vrf
!
router bgp 650030 vrf vrf1
!
tor-21(config)# vrf vrf1
tor-21(config-vrf)# vni 104001 prefix-routes-only
tor-21(config-vrf)# no vni 104001 prefix-routes-only
tor-21(config-vrf)# end
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
There was a silly bug introduced when the command to show failed sessions
was added. A missing "," caused the wrong error message to be printed.
Debugging this led down a path that:
- Led to discovering one more error message that needed to be added
- Providing the error code along with the string in the JSON output
to allow programs to key off numbers rather than strings.
- Fixing the missing ","
- Changing the error message to "Waiting for Peer IPv6 LLA" to
make it clear that we're waiting for the link local addr.
Signed-off-by: Dinesh G Dutt <5016467+ddutt@users.noreply.github.com>
frr_with_mutex(...) { ... } locks and automatically unlocks the listed
mutex(es) when the block is exited. This adds a bit of safety against
forgetting the unlock in error paths & co. and makes the code a slight
bit more readable.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Conver these functions:
route_map_add_match
route_map_delete_match
route_map_add_set
route_map_delete_set
To return the `enum rmap_compile_rets` and ensure all functions
that use this code handle all the enumerated possible returns.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Based on a suggestion by Donald Sharp, this patch adds the counts of the
number of times a BGP peering session has transitioned from Estd->NotEstd
and from NotEstd->Estd to the JSON output only of the
"show [ip] bgp [vrf <vrf>] summary" command. The idea is that even if the
current session is well and up, but a sessions has trasnitionined in and
out of Estd state multiple times, its worth noting that. We cannot change
the non-JSON output as easily, and so this command only addresses the JSON
part for now. The fields added are the ones that were provided only as part
of the "show bgp neighbor" command.
Signed-off-by: Dinesh G Dutt <5016467+ddutt@users.noreply.github.com>
In a data center, having 32-128 peers is not uncommon. In such a situation, to find a
peer that has failed and why is several commands. This hinders both the automatability of
failure detection and the ease/speed with which the reason can be found. To simplify this
process of catching a failure and its cause quicker, this patch does the following:
1. Created a new function, bgp_show_failed_summary to display the
failed summary output for JSON and vty
2. Created a new function to display the reset code/subcode. This is now used in the
failed summary code and in the show neighbors code
3. Added a new variable failedPeers in all the JSON outputs, including the vanilla
"show bgp summary" family. This lists the failed session count.
4. Display peer, dropped count, estd count, uptime and the reason for failure as the
output of "show bgp summary failed" family of commands
5. Added three resset codes for the case where we're waiting for NHT, waiting for peer
IPv6 addr, waiting for VRF to init.
This also counts the case where only one peer has advertised an AFI/SAFI.
The new command has the optional keyword "failed" added to the classical summary command.
The changes affect only one existing output, that of "show [ip] bgp neighbors <nbr>". As
we track the lack of NHT resolution for a peer or the lack of knowing a peer IPv6 addr,
the output of that command will show a "waiting for NHT" etc. as the last reset reason.
This patch includes update to the documentation too.
Signed-off-by: Dinesh G Dutt <5016467+ddutt@users.noreply.github.com>
This implements BMP. There's no fine-grained history here, the non-BMP
preparations are already split out from here so all that remains is BMP
proper.
Signed-off-by: David Lamparter <equinox@diac24.net>
This is the initial BMP skeleton from Yasuhiro Ohara.
(License/Signoff note: code published on github as GPLv2+.)
Signed-off-by: David Lamparter <equinox@diac24.net>
If we reject a received update in a filter, it never turns into a
bgp_path_info but stays in adj_in. For that case, we don't have any
timestamp for the update.
Currently, this isn't visible anywhere; BMP will make use of this
timestamp (and we can add a CLI option if we want.)
Signed-off-by: David Lamparter <equinox@diac24.net>
We have this crash:
2019-08-18T07:58:44.831656-04:00 rch2-140-fwK2b bgpd[1791]: %NOTIFICATION: sent to neighbor 10.73.248.8 4/0 (Hold Timer Expired) 0 bytes
2019-08-18T07:58:44.832164-04:00 rch2-140-fwK2b bgpd[1791]: Assertion `!((peer->thread_flags) & ((1 << 0)))' failed in file bgpd.c, line 2173, function peer_delete
2019-08-18T07:58:44.832548-04:00 rch2-140-fwK2b bgpd[1791]: Backtrace for 11 stack frames:
2019-08-18T07:58:44.832942-04:00 rch2-140-fwK2b bgpd[1791]: [bt 0] /usr/lib/libfrr.so.0(zlog_backtrace+0x3a) [0x7f5503c7c31a]
2019-08-18T07:58:44.833311-04:00 rch2-140-fwK2b bgpd[1791]: [bt 1] /usr/lib/libfrr.so.0(_zlog_assert_failed+0x61) [0x7f5503c7c891]
2019-08-18T07:58:44.833684-04:00 rch2-140-fwK2b bgpd[1791]: [bt 2] /usr/lib/frr/bgpd(peer_delete+0x4d5) [0x1432ceea15]
2019-08-18T07:58:44.834095-04:00 rch2-140-fwK2b bgpd[1791]: [bt 3] /usr/lib/frr/bgpd(+0x430e9) [0x1432cfc0e9]
2019-08-18T07:58:44.834479-04:00 rch2-140-fwK2b bgpd[1791]: [bt 4] /usr/lib/frr/bgpd(bgp_event_update+0x121) [0x1432cfe1c1]
2019-08-18T07:58:44.834852-04:00 rch2-140-fwK2b bgpd[1791]: [bt 5] /usr/lib/frr/bgpd(+0x453f1) [0x1432cfe3f1]
2019-08-18T07:58:44.835388-04:00 rch2-140-fwK2b bgpd[1791]: [bt 6] /usr/lib/libfrr.so.0(thread_call+0x60) [0x7f5503c9e3c0]
2019-08-18T07:58:44.835829-04:00 rch2-140-fwK2b bgpd[1791]: [bt 7] /usr/lib/libfrr.so.0(frr_run+0xb8) [0x7f5503c79de8]
2019-08-18T07:58:44.836292-04:00 rch2-140-fwK2b bgpd[1791]: [bt 8] /usr/lib/frr/bgpd(main+0x229) [0x1432ce4a69]
2019-08-18T07:58:44.836729-04:00 rch2-140-fwK2b bgpd[1791]: [bt 9] /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xf5) [0x7f550271bb45]
2019-08-18T07:58:44.837198-04:00 rch2-140-fwK2b bgpd[1791]: [bt 10] /usr/lib/frr/bgpd(+0x2cefc) [0x1432ce5efc]
2019-08-18T07:58:44.837670-04:00 rch2-140-fwK2b bgpd[1791]: Current thread function (bgp_holdtime_timer), scheduled from file bgp_fsm.c, line 380
This is the code:
bgp_reads_off(peer);
bgp_writes_off(peer);
assert(!CHECK_FLAG(peer->thread_flags, PEER_THREAD_WRITES_ON));
assert(!CHECK_FLAG(peer->thread_flags, PEER_THREAD_READS_ON));
The line crashing is the first assert. We know in bgp_writes_off we unset this flag:
void bgp_writes_off(struct peer *peer)
{
struct frr_pthread *fpt = bgp_pth_io;
assert(fpt->running);
thread_cancel_async(fpt->master, &peer->t_write, NULL);
THREAD_OFF(peer->t_generate_updgrp_packets);
UNSET_FLAG(peer->thread_flags, PEER_THREAD_WRITES_ON);
}
We also know that the keepalives are not being turned off until we call
bgp_fsm_change_status(peer, Deleted);
later in the function. We know that the keepalive pthread will
write to individual peers and issue a bgp_write_on(), which sets
this flag.
Modify the code base so that we explicitly turn off the keepalives
immediately before the turning of writes off.
Ticket: CM-26119
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Problem:
With advertise_svi_ip knob enabled per vni.
Post vni flap, svi MAC-IP route are not originated.
Fix:
When a vni is flapped, upon re-add
send advetise_svi_ip knob to zebra.
Workaround:
re-configure advertise-svi-ip under l2vpn/evpn.
Ticket:CM-26001
Reviewed By:CCR-9118
Testing Done:
With advertise-svi-ip enabled under l2vpn/evpn
in bgp default instance.
Validated vni del/create post ifdown vxlan device
followed by ifup vxlan device.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Evpn extended communities like auto rts (import/export) should
check if its present in list before adding it, to avoid duplicate
addition.
L3vni_add callback from zebra to bgp may see updates to vnis.
The auto import/export rt derivation may call multiple times.
Testing Done:
Before:
TORC11# show bgp l2vpn evpn vni 4001
VNI: 4001 (known to the kernel)
Type: L3
Tenant VRF: vrf1
RD: 45.0.2.2:3
...
Import Route Target:
5546:4001
5546:4001
Export Route Target:
5546:4001
5546:4001
After:
VNI: 4001 (known to the kernel)
Type: L3
Tenant VRF: vrf1
RD: 45.0.2.2:3
...
Import Route Target:
5546:4001
Export Route Target:
5546:4001
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
In a number of places, the JSON output had invalid key names for
AFI/SAFI. For example, the key name in JSON was "IPv4 Unicast" which
is invalid as a JSON Key name. Many JSON tools such as those used in
Ansible, jq etc. all fail to parse the output in these scenarios. The
valid name is ipv4Unicast. There's already a routine afi_safi_json()
defined to handle this change, but it was not consistently called.
The non-JSON version was called afi_safi_print() and it merely returned
the CLI version of the string, didn't print anything.
This patch deals with this issue by:
- Renaming afi_safi_print to get_afi_safi_str()
- get_afi_safi_str takes an additional param, for_json which if true
will return the JSON-valid string
- Renaming afi_safi_json to get_afi_safi_json_str()
- Creating a new routine get_afi_safi_vty_str() for printing to vty
- Consistently using get_afi_safi_str() with the appropriate for_json
value
Signed-off-by: Dinesh G Dutt <5016467+ddutt@users.noreply.github.com>
that hook is called back when default vrf name changes.
note that the hook is bgp_vrf_enable, and that the function is slightly
modified in order to be able to move bgp vrf instance from vrf to
default instance. for this, rfapi contexts are allocated.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
The `set as-path prepend last-as X` command had no, 'no' form
of the command. Add this into the cli.
Testing:
!
route-map BLARBLE permit 10
set as-path prepend last-as 3
!
!
router bgp 9999
neighbor 10.50.12.118 remote-as external
neighbor 10.50.12.118 ebgp-multihop 30
!
address-family ipv4 unicast
neighbor 10.50.12.118 route-map BLARBLE in
!
!
eva# show bgp ipv4 uni 4.4.4.4
BGP routing table entry for 4.4.4.4/32
Paths: (1 available, best #1, table default)
Advertised to non peer-group peers:
10.50.12.118
999 999 999 999
10.50.12.118 from 10.50.12.118 (10.50.12.118)
Origin incomplete, metric 0, valid, external, best (First path received)
Last update: Mon Aug 26 09:47:17 2019
eva# conf
eva(config)# route-map BLARBLE permit 10
eva(config-route-map)# no set as-path prepend last-as 3
eva(config-route-map)# end
eva# clear bgp ipv4 uni *
eva# show bgp ipv4 uni 4.4.4.4
BGP routing table entry for 4.4.4.4/32
Paths: (1 available, best #1, table default)
Advertised to non peer-group peers:
10.50.12.118
999
10.50.12.118 from 10.50.12.118 (10.50.12.118)
Origin incomplete, metric 0, valid, external, best (First path received)
Last update: Mon Aug 26 09:48:31 2019
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When user wants to dump individual large-community-list with the name
then bgp throws an error. It is due to command to dump the bgp RIB routes
having a particular large-community-list values. To segregate both the
commands this fix has added the detail keyword in the below command.
show bgp large-community-list <(1-500)|WORD> detail
The same code change is applicable for community-list also.
Signed-off-by: vishaldhingra<vdhingra@vmware.com>
The `show bgp l2vpn evpn route type <es|prefix>` commands
only accepted 2 letters. You could not type `show bgp l2vpn evpn route type e`
or `show bgp l2vpn evpn route type p` although both are technically legal
since nothing overlaps with them.
Ticket: CM-25988
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Code inspection found some functions being declared
in a .h file but FRR does not have the functions
implemented.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Problem reported that "clear bgp *" only cleared ipv6 peers.
Changed the logic to clear all afi/safis of all peers in
that case. Also improved the operation of clearing
individual afi/safi using soft/in/out to do the right thing.
Ticket: CM-25887
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Debian packaging when run finds a bunch of spelling errors:
I: frr: spelling-error-in-binary usr/bin/vtysh occurences occurrences
I: frr: spelling-error-in-binary usr/lib/frr/bfdd Amount of times Number of times
I: frr: spelling-error-in-binary usr/lib/frr/bgpd occurences occurrences
I: frr: spelling-error-in-binary usr/lib/frr/bgpd recieved received
I: frr: spelling-error-in-binary usr/lib/frr/isisd betweeen between
I: frr: spelling-error-in-binary usr/lib/frr/ospf6d Infomation Information
I: frr: spelling-error-in-binary usr/lib/frr/ospfd missmatch mismatch
I: frr: spelling-error-in-binary usr/lib/frr/pimd bootsrap bootstrap
I: frr: spelling-error-in-binary usr/lib/frr/pimd Unknwon Unknown
I: frr: spelling-error-in-binary usr/lib/frr/zebra Requsted Requested
I: frr: spelling-error-in-binary usr/lib/frr/zebra uknown unknown
I: frr: spelling-error-in-binary usr/lib/x86_64-linux-gnu/frr/libfrr.so.0.0.0 overriden overridden
This commit fixes all of them except the bgp `recieved` issue due to
it being part of json output. That one will need to go through
a deprecation cycle.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
In a situation where a VRF has configured route targets for importing
EVPN routes, this configuration may exist prior to the VRF being
ready to have EVPN routes installed into it - e.g., still missing
the L3VNI configuration or associated interface information. Ensure
that this is taken into account during EVPN route import and unimport.
Without this fix, EVPN routes would end up being prematurely imported
into the VRF routing table and consequently installed as inactive
(because the nexthop information would be incorrect when BGP informs
zebra).
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
When a BGP next hop tracking (NHT) entry is created for a peer,
display it in the corresponding "show" command output.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
In the case of IPv4 route exchange using GUA IPv6 peering, the route install
into the FIB involves mapping the immediate next hop to an IPv4 link-local
address and installing neighbor entries for this next hop address. To
accomplish the latter, IPv6 Router Advertisements are exchanged (the next hop
or peer must also have this enabled) and the RAs are dynamically initiated
based on next hop resolution.
However, in the case of a passive connection where the local system has not
initiated anything, no NHT entry is created for the peer, hence RAs were not
getting triggered. Address this by ensuring that a NHT entry is created even
in this situation. This is done at the time the connection becomes established
because the code has other assumptions that a NHT entry will be present only
for the "configured" peer. The API to create the entry ensures there are
no duplicates.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
In case the topmost node has a larger prefix length than the lookup
prefix it never matches even if it was still lower than maxlen
This also alters a test case to check for this bug.
Signed-off-by: Marcel Röthke <marcel.roethke@haw-hamburg.de>
For IPv4/v6 unicast routes that have been imported from EVPN Prefix
routes, display the information about where the route has been imported
from allowing for easy tracing of how a FIB/RIB entry got populated.
Signed-off-by: Dinesh G Dutt <5016467+ddutt@users.noreply.github.com>
Generally available hook for plugging application-specific
code in for bgp peer change events.
This hook (peer_status_changed) replaces the previous, more
specific 'peer_established' hook with a more general-purpose one.
Also, 'bgp_dump_state' is now registered under this hook.
Signed-off-by: Marton Kun-Szabo <martonk@amazon.com>
Say for eg., 256 prefix-list entries are pasted to VTYSH.
This results in BGP processing the events for several minutes.
BGPD starts a timer for 5 seconds when the first dependency configuraion
is received. On timer expiry, BGP process dependent route-maps.
After this processing, BGPD reads the configurations received in the
next 5 seconds and then re-processes the route-maps from the beginning.
This cyclic re-processing consumes time and CPU cycles.
Instead of starting a timer when the first configuration is received,
everytime a configuration is received, the existing timer is reset.
This would mean that all the configurations are read first before the timer
expires. This eliminates the cyclic re-processing.
Signed-off-by: NaveenThanikachalam nthanikachal@vmware.com
BGP large-communities configuration CLI is successful even if
the command is configured without any attributes.
For ex., the below commands are successful.
1) "bgp large-community-list standard TEST permit"
2) "bgp large-community-list standard TEST deny"
The CLI definitions that allow these erroneous configurations need to be removed.
Signed-off-by: NaveenThanikachalam nthanikachal@vmware.com
A race condition causes the failure.
The function "make_info()" sets the path info's peer to
bgp instance's "peer_self" which is created when BGP is first
configured and deleted only when BGP is brought down completely.
A race condition causes the bgp instances's "peer_self" to be
removed before the routes are being pulled off from the aggregate
address.
If the bgp instance's "peer_self" is NULL or, if BGP is being deleted,
the aggregate route must not be reinstalled.
Signed-off-by: NaveenThanikachalam nthanikachal@vmware.com
The CLI to configure the standard format large-communities attribute
accepts regular expressions as well.
For ex., the below configuration is accepted.
"bgp large-community-list standard TEST permit 1:1 100:*"
The code to parse the large-communities does identify the configuration
as invalid however, error returned isn't processed.
The code has to be modified to handle the error.
Signed-off-by: NaveenThanikachalam nthanikachal@vmware.com
"show bgp l2vpn evpn neighbors <neighbor> [advertised-routes|routes]' did
not work due to various bugs. First, the command only accepted IPv4
addresses as valid neighbor ID, thereby rejecting unnumbered BGP and IPv6
neighbor address. Second, the SAFI was hardcoded to MPLS_VPN even though
we were passing the safi. Third, "all" made no sense in the command context
and to make the command uniform across all address families, I removed the
"all" keyword from the command.
Signed-off-by: Dinesh G Dutt <ddps4u@gmail.com>
The correct cast for these is (unsigned char), because "char" could be
signed and thus have some negative value. isalpha & co. expect an int
arg that is positive, i.e. 0-255. So we need to cast to (unsigned char)
when calling any of these.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Problem reported with memory leak when the command "show bgp vrf all
ipv6 unicast summary json" is issued. Found that the problem only
occurs if the configuration does not actually include the ipv6
address-family but does contain ipv4 unicast peers. If we didn't
match a peer in the address-family being displayed, we would create
the json object but never free it. This fix actually stops creating
the json object in this section of code and lets the create happen
in the area where the match occurs.
Ticket: CM-25616
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Problems reported that if multiple peers have "remove-private-AS
replace-AS" with each other and all are using private asns, the as-path
gets hosed and continues to grow when a prefix is removed. This fix
disallows removing and replacing the private asn if it matches the
peer's ASN so that normal as-path loop prevention will operate correctly.
Ticket: CM-25489
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Problem reported that if "clear bgp swp1" is issued, an error
message is received saying the name or address is malformed. This
was because of a change in bgp_vty.c that removed the storing
and passing of the interface name for this command. Commit that
caused the problem was ac5dec7e88ce2f8cd2943bb61437046718fb34c2.
Ticket: CM-25737
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
community_val_get() returns ntohl(val) which is used in more places like
community_include(), community_add_val(), but community_del_val() is missing
back conversion htonl().
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
Problem reported that when vrf route-leaking between an unnumbered
peer in one vrf to a numbered peer in another vrf, the nexthop
attribute was missing from the update, causing the session to fail.
determined that we needed to expand the mechanism for verifying if
the route has been learned in the other vrf without an ipv4 nexthop.
Ticket: CM-25610
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Issue1: When a vni in-filter eg:"neighbor X.X.X.X route-map RM-VNI-FILTER in"
is configured under evpn address-family, all the received routes are dropped
regardless of whether the route has a matching vni or not.
(Where RM-VNI-FILTER contains "match evpn vni 100")
Issue2: Routes with 2 labels are not filtered correctly
Issue3: This filter should not get applied for MPLS routes. For MPLS routes,
we need route-map to handle a 3rd state besides match/nomatch called: noop.
Fix1: The handler bgp_update() that services the received route ignored the
route's label while deciding whether to filter it or not.
As part of the fix, the handler now uses the label info to make the
decision about whether to filter the route or not.
Fix2: route_match_vni() now tries to match both the labels within the route
Fix3: route_match_vni() should return noop when it encounters an mpls based
route. For this, route_map library should handle this 3rd state: RMAP_NOOP.
Related fix : Extract tunnel type
This fix relies on PR 4314 #4314 to extract the tunnel type from bgp extended
communities. The information about the route's tunnel type (vxlan or mpls)
is needed to apply "match evpn vni xx" rule. This rule is applicable to
vxlan routes, and should exit safely for mpls based evpn routes.
Signed-off-by: Lakshman Krishnamoorthy lkrishnamoor@vmware.com
Introducing a 3rd state for route_map_apply library function: RMAP_NOOP
Traditionally route map MATCH rule apis were designed to return
a binary response, consisting of either RMAP_MATCH or RMAP_NOMATCH.
(Route-map SET rule apis return RMAP_OKAY or RMAP_ERROR).
Depending on this response, the following statemachine decided the
course of action:
State1:
If match cmd returns RMAP_MATCH then, keep existing behaviour.
If routemap type is PERMIT, execute set cmds or call cmds if applicable,
otherwise PERMIT!
Else If routemap type is DENY, we DENYMATCH right away
State2:
If match cmd returns RMAP_NOMATCH, continue on to next route-map. If there
are no other rules or if all the rules return RMAP_NOMATCH, return DENYMATCH
We require a 3rd state because of the following situation:
The issue - what if, the rule api needs to abort or ignore a rule?:
"match evpn vni xx" route-map filter can be applied to incoming routes
regardless of whether the tunnel type is vxlan or mpls.
This rule should be N/A for mpls based evpn route, but applicable to only
vxlan based evpn route.
Also, this rule should be applicable for routes with VNI label only, and
not for routes without labels. For example, type 3 and type 4 EVPN routes
do not have labels, so, this match cmd should let them through.
Today, the filter produces either a match or nomatch response regardless of
whether it is mpls/vxlan, resulting in either permitting or denying the
route.. So an mpls evpn route may get filtered out incorrectly.
Eg: "route-map RM1 permit 10 ; match evpn vni 20" or
"route-map RM2 deny 20 ; match vni 20"
With the introduction of the 3rd state, we can abort this rule check safely.
How? The rules api can now return RMAP_NOOP to indicate
that it encountered an invalid check, and needs to abort just that rule,
but continue with other rules.
As a result we have a 3rd state:
State3:
If match cmd returned RMAP_NOOP
Then, proceed to other route-map, otherwise if there are no more
rules or if all the rules return RMAP_NOOP, then, return RMAP_PERMITMATCH.
Signed-off-by: Lakshman Krishnamoorthy <lkrishnamoor@vmware.com>
For SRGB, we need to support chunk requests starting at a
specific point in the label space, rather than just asking
for any sufficiently large chunk. To this purpose, we extend
the label manager api to request a chunk with a base value;
if the base is set to 0, the label manager will behave as it
currently does, i.e. fetching the first free chunk big enough
to satisfy the request.
update all the existing calls to get chunks from the label
manager so that they use MPLS_LABEL_BASE_ANY as the base
for the requested chunk
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
When using the maximum-prefix restart option with a BGP peer,
if the peer exceeds the limit of prefixes, bgpd causes the
connection to be closed and sets a timer. It will not attempt
to connect to that peer until the timer expires. But if the
peer attempts to connect to it before the timer expires, it
accepts the connection and starts exchanging routes again.
When accepting a connection from a peer, reject the connection
if the max prefix restart timer is set.
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
Some code to cleanup bgp routemap.c a bit.
Addint to this, if a bgp flowspec entry contains a destination IP address,
then the ip address is compared against the prefix-list referenced into
the route-map used.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Signed-off-by: Donald Sharp <sharpd@cumulunetworks.com>
when multiple action rules are analysed in the BGP flowspec entry, if at
least the traffic-rate set to 0 is seen, then immediately create a rule
with drop rule. Previously this was not the case in case a forwarding
rule was seen.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
in addition to support for tcpflags, it is possible to filter on any
protocol. the filtering can then be based with iptables.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Unlike MRT dumps, BMP also provides packets sent by the router. Add
another hook for that.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
The MRT dump code is already hooked in at the right places to write out
packets; the BMP code needs exactly the same access so let's make this
a hook.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Both of these hooks are necessary for proper operation of extensions
that need to latch on to a particular instance.
- without the delete hook, it's impossible to get rid of stale
references, leading to crashes with invalid instance pointers.
- the config-write hook is necessary because per-instance config needs
to be written inside the "router bgp" block to have the appropriate
context; adding a separate config node can't do that.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
BMP uses this to get notified about any changes to prefixes, at which
point it schedules its own processing to happen later.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
These counters are accessible through BMP and may be useful to monitor
bgpd. A CLI to show them could also be added if people are interested.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
last_reset_cause_size is the length *used* in last_reset_cause[]. It's
straight up used wrong here; we're saving off a reset cause and need to
check against the *available* size in last_reset_cause[].
This could actually have led to (hopefully rare) crashes in the assert
there, since the assert condition might fail incorrectly.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
bgp update messages were not correctly calculating the size
for a labeled-unicast prefix, as they were not accounting
for the label. If the update message was large enough to
overflow the maximum packet size (4096 bytes) this could
cause bgpd to send a malformed update packet.
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
not getting displayed.
Neighbour prefix-count is not getting displayed with IPV6 neighbours
and displays the o/p “ % No such neighbor or address family ”.
However, I observed it is working fine for IPV4 neighbour.
Signed-off-by: Biswajit Sadhu <sadhub@vmware.com>
The `no redistribute ...` commands were not allowing
the input to be in any order. Fix code to allow this.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
under some conditions, the callback to get a label for
a LU bgp path could be called after the path had already
been freed. In this case we would be reading garbage
and potentially crash. Lock the path info before
queueing the callback, and unlock as the first step
of the callback, exiting gracefully if the path info
is now NULL.
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
EVPN route's extended community include
important informations like Mobility sequence,
router mac, and RT values, include the ecomm
in evpn brief output.
Ticket:CM-25353
Testing Done:
Validated in evpn deployment with routes.
TOR#show bgp l2vpn evpn route
...
Network Next Hop Metric LocPrf Weight Path
Extended Community
Route Distinguisher: 27.0.0.11:3
*> [2]:[0]:[0]:[48]:[00:02:00:00:00:04]:[128]:[fe80::202:ff:fe00:4]
36.0.0.11 0 4435 5546 i
RT:5546:1008 ET:8 ND:Router Flag
* [2]:[0]:[0]:[48]:[00:02:00:00:00:36]
36.0.0.11 0 4435 5546 i
RT:5546:1008 RT:5546:4003 ET:8 MM:0, sticky MAC Rmac:44:38:39:ff:ff:01
*> [2]:[0]:[0]:[48]:[00:02:00:00:00:36]
36.0.0.11 0 4435 5546 i
RT:5546:1008 RT:5546:4003 ET:8 MM:0, sticky MAC Rmac:44:38:39:ff:ff:01
* [3]:[0]:[32]:[36.0.0.11]
36.0.0.11 0 4435 5546 i
RT:5546:1008 ET:8
*> [3]:[0]:[32]:[36.0.0.11]
36.0.0.11 0 4435 5546 i
RT:5546:1008 ET:8
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
When we are issuing a new command:
router bgp
bgp default local-preference ..
-or-
bgp cluster-id ...
-or-
bgp disable-ebgp-connected-route-check
Do not tell them that afi/safi's are not configured. There is nothing
to do with this information and it will create confusion in the
end user that we are looking for afi/safi's that are never going to
be configed.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The `neighbor X:X::X default-originate command is complaining
that:
The route-map '(null)' does not exist.
Upon inspection of the code we were passing a NULL
string to the lookup. Testing for null gets us this:
donna.cumulusnetworks.com# conf t
donna.cumulusnetworks.com(config)# router bgp 99
donna.cumulusnetworks.com(config-router)# neighbor 2001:1::1:2 remote-as 99
donna.cumulusnetworks.com(config-router)# neighbor 2001:1::1:2 default-originate
donna.cumulusnetworks.com(config-router)# end
donna.cumulusnetworks.com# show run
Building configuration...
Current configuration:
!
frr version 7.2-dev
frr defaults datacenter
hostname donna.cumulusnetworks.com
log stdout
no ipv6 forwarding
!
ip route 4.5.6.7/32 10.50.11.4
!
router bgp 99
neighbor 2001:1::1:2 remote-as 99
!
address-family ipv4 unicast
neighbor 2001:1::1:2 default-originate
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
FRR has a provision to give exact-match in match clause for
standard community, but this option is missing for lcommunity.
Part 3 : show related changes for match clause
Signed-off-by: vishaldhingra <vdhingra@vmware.com>
FRR has a provision to give exact-match in match clause for
standard community, but this option is missing for lcommunity.
Part 2 : CLI related changes for match clause
Signed-off-by: vishaldhingra <vdhingra@vmware.com>
FRR has a provision to give exact-match in match clause for
standard community, but this option is missing for lcommunity.
Part 1 : Added support in clist lib
Signed-off-by: vishaldhingra <vdhingra@vmware.com>
The `bgp multiple-instance` command has been removed but
we did not properly update the documentation. Let's do so.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This code is not returned anywhere in the system as that bgp
is by default multiple-instance 'only' now. So remove
the last remaining bits of it from the code base.
Remove BGP_ERR_MULTIPLE_INSTANCE_USED too.
Make bgp_get explicitly return BGP_SUCCESS
instead of 0.
Remove the multi-instance error code too.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
There exists a state where we may have a rd node but no individual
evpn prefix nodes in the two level table:
(gdb) bt
at bgpd/bgp_evpn_vty.c:1190
filter=FILTER_RELAXED) at lib/command.c:1060
at lib/command.c:1119
vtysh=vtysh@entry=0) at lib/command.c:1273
(gdb) f 5
at bgpd/bgp_evpn_vty.c:1190
1190 bgpd/bgp_evpn_vty.c: No such file or directory.
(gdb) p buf
$1 = "[2]:[0]:[48]:[00:00:00:00:00:00]", '\000' <repeats 240 times>...
(gdb) p json_nroute
$2 = (json_object *) 0x0
(gdb) p rd_header
$3 = 1
(gdb) p buf
$4 = "[2]:[0]:[48]:[00:00:00:00:00:00]", '\000' <repeats 240 times>...
(gdb)
I'm not entirely sure that this is not a `different` problem in that the
rd node should have been removed. But I think preventing the crash
in a show command is probably the right thing to do here.
Fixes: #4501
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
On interface up/down, bgp stores the mac address of the interface
in a bgp_mac_hash table entry and then initiates a rescan
of the evpn l2vpn table. The problem with this scan is that
it is looking at every item in the table when only 1 mac
has changed. So every up/down event causes some major trauma
in the bgp_update processing.
Modify the mac scanning such that we know the mac that is changed
and as such we should reprocess those entries only.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
If we get a callback for a interface change but we do not
actually have to move the mac entry in the hash then
we were accidently leaking the Mac Hash String all over
ourselves. Messy Messy!
Ticket: CM-25351
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When a source bgp vrf instance is deleted, ensure the referencing
of it in vrf route leak show commands.
Ticket:CM-20534 CM-24484
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
two bgp vrf instance has vrf route leak configured,
when a source vrf x is deleted, its leaked routes are cleaned
up from the destination and vpn table.
With this change when a source bgp instance is reconfigured,
export its routes back to destination vrfs where it is configured
as leak.
Ticket:CM-20534 CM-24484
Reviewed By:
Testing Done:
configure vrf leak between two vrf intances,
delete and readd source vrf and checked its routes
exported to vpn table and leaked vrfs table.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
A VRF leak is configured between two vrfs,
bgp VRF X and VRF Y.
When a bgp VRF X is removed, unimport bgp VRF X routes
from VPN and VRF Y.
If VRF X is also importing from bgp VRF Y, remove X from
export list of Y and do required route cleanup.
Ticket:CM-20534 CM-24484
Reviewed By:
Testing Done:
Before deleteing vrf1002:
nl1# show ip route vrf vrf1003 9.9.2.4/32
Routing entry for 9.9.2.4/32
Known via "bgp", distance 200, metric 0, vrf vrf1003, best
Last update 00:04:51 ago
* 200.2.8.2, via swp1.2(vrf vrf1002)
* 200.2.9.2, via swp2.2(vrf vrf1002)
* 200.2.10.2, via swp3.2(vrf vrf1002)
Instance vrf1003:
This VRF is importing IPv4 Unicast routes from the following VRFs:
vrf1002
Import RT(s): 6.0.2.9:2
This VRF is exporting IPv4 Unicast routes to the following VRFs:
vrf1002
RD: 6.0.3.9:3
Export RT: 6.0.3.9:3
After deleting vrf1002:
nl1(config)# no router bgp 64902 vrf vrf1002
nl1# show ip route vrf vrf1003 9.9.2.4/32
Routing entry for 9.9.2.4/32
Known via "bgp", distance 20, metric 0, vrf vrf1003, best
Last update 00:00:32 ago
* 200.3.8.2, via swp1.3
* 200.3.9.2, via swp2.3
* 200.3.10.2, via swp3.3
Instance vrf1003:
This VRF is importing IPv4 Unicast routes from the following VRFs:
vrf1002
Import RT(s):
This VRF is not exporting IPv4 Unicast routes to any other VRF
nl1# show bgp ipv4 vpn
No BGP prefixes displayed, 0 exist
Readd vrf1002:
points back to source vrf
nl1# show ip route vrf vrf1003 9.9.2.4/32
Routing entry for 9.9.2.4/32
Known via "bgp", distance 200, metric 0, vrf vrf1003, best
Last update 00:00:21 ago
* 200.2.8.2, via swp1.2(vrf vrf1002)
* 200.2.9.2, via swp2.2(vrf vrf1002)
* 200.2.10.2, via swp3.2(vrf vrf1002)
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
FRR has no option for the as-set for aggregate route
under IPV6 address family. Added the command to
configure the as-set option for IPV6.
Signed-off-by: vishaldhingra <vdhingra@vmware.com>
show bgp vrfs command is formatted with couple
of things.
show bgp vrfs to inclue bgp vrf instance's
SVI interface.
Move L3vni, RMAC and SVI value in next line.
Ticket:CM-25317
Reviewed By:CCR-8816
Testing Done:
New Output:
TORS1# show bgp vrfs
Type Id routerId #PeersVfg #PeersEstb Name
L3-VNI RouterMAC Interface
DFLT 0 27.0.0.15 2 2 default
0 00:00:00:00:00:00 unknown
VRF 31 45.0.8.2 0 0 vrf3
4003 00:02:00:00:00:4e vlan4003
VRF 35 45.0.2.2 0 0 vrf1
4001 00:02:00:00:00:4e vlan4001
VRF 25 45.0.6.2 0 0 vrf2
4002 00:02:00:00:00:4e vlan4002
Total number of VRFs (including default): 4
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
notify_data_remote_as4 would contain garbage if optlen == 0, and also
as4 is in host byte order while the notify needs network byte order.
Signed-off-by: David Lamparter <equinox@diac24.net>
This is mostly relevant for Solaris, where config.h sets up some #define
that affect overall header behaviour, so it needs to be before anything
else.
Signed-off-by: David Lamparter <equinox@diac24.net>
Skip evpn routes marked for removed from rescan list
when an interface is flapped.
Ticket:CM-24933
Testing Done:
Validated in a scenario where evpn route is marked
for remove as bgp evpn withdrawal is received. Due to
link flap (frr restart of downstream router), the route
was considered for readd via bgp_update. With this
fix, the remove marked routes are skipped from update.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
A router-id change that isn't explicitly configured (a change
from zebra, for example) should not replace a configured vpn
RD/RT.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Field vrf_id is replaced by the pointer of the struct vrf *.
For that all other code referencing to (interface)->vrf_id is replaced.
This work should not change the behaviour.
It is just a continuation work toward having an interface API handling
vrf pointer only.
some new generic functions are created in vrf:
vrf_to_id, vrf_to_name,
a zebra function is also created:
zvrf_info_lookup
an ospf function is also created:
ospf_lookup_by_vrf
it is to be noted that now that interface has a vrf pointer, some more
optimisations could be thought through all the rest of the code. as
example, many structure store the vrf_id. those structures could get
the exact vrf structure if inherited from an interface vrf context.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
vrf_id parameter is replaced with struct vrf * parameter. It is
needed to create vrf structure before entering in the fuction.
an error is generated in case the vrf parameter is missing.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
the vrf_id parameter is replaced by struct vrf * parameter.
this impacts most of the daemons that look for an interface based on the
name and the vrf identifier.
Also, it fixes 2 lookup calls in zebra and sharpd, where the vrf_id was
ignored until now.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Issue:
ip route 15.1.1.0/24 10.112.158.15
ip route 15.1.1.0/32 10.112.158.15
Brought up ebgp session between two FRR routers and
redistributed static routes via BGP and verfied the advertising
routes in the peer.
Verify the command "show ip bgp neighbors <neighbor address>
advertised-routes json". It only shows 15.1.1.0/32 route details.
Root casue:
For both the routes "15.1.1.0/24" and "15.1.1.0/32" the advertised
routes key is the prefix i.e. "15.1.1.0".
Fix:
Modify the key to prefix/prefix-length.
Signed-off-by: Sarita Patra <saritap@vmware.com>
* When the bgp is being deleted and routes are in clear workqueue
and new aggregate address being allocated
* Added flag BGP_FLAG_DELETE_IN_PROGRESS in bgp structure to
bgp instance is being deleted
* When adding aggregate route check this flag and peer_self is valid
Signed-off-by: Soman K S <somanks@vmware.com>
Problem reported with "clear bgp l2vpn evpn * soft" clearing the
wrong afi/safi (cleared ipv6 unicast instead). Determined that
the calling function used the argv_find_and_parse_afi/safi routines
to determine the correct afi/safi to pass on. Since l2vpn/evpn were
missing from the lookup, the command defaulted to ipv6 unicast. This
fix just adds that afi/safi to the lookup routine.
Ticket: CM-25167
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
The BGP_OPT_CONFIG_CISCO command could no longer be set
as such remove it from the system as a viable option to
be used.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Since we no-longer allow you to select multiple-instance
or not from the cli, let's completely remove the flag
as well.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The iana_afi_t and iana_safi_t were being created in zebra.h
and zebra.h is a bit of a dumping ground. When the iana_afi2str and
iana_safi2str functions were created, it was correctly pointed out
that we should just use the internal afi_t and safi_t 2str functions
but to do that we would need to include prefix.h in zebra.h. Which
really is not the right thing to do. This tells us that we need
to break out this code into it's own header.
Move to iana_afi.h the enums and specific functions and remove
from zebra. Convert to using the afi2str and safi2str functions.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Modify the code such that we can auto turn the iana values of afi
and safi to pleasant to read strings.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Issue1: When "neighbor X.X.X.X route-map RM-VNI-FILTER in" is configured under evpn address-family,
all the received routes are dropped regardless of whether the route has a matching vni or not.
Issue2: Routes with 2 labels are not filtered correctly
Issue3: Interpreting the label based on tunnel type, vxlan was not done correctly.
Vxlan label has 24 bits, whereas, MPLS label is 20 bits long
Fix1: The handler bgp_update() that services the received route ignored the route's label while deciding whether to filter it or not. As part of the fix, the handler now uses the label info to make the decision about whether to filter the route or not.
Fix2: route_match_vni() now tries to match both the labels within the route, not just the one.
Signed-off-by: Lakshman Krishnamoorthy <lkrishnamoor@vmware.com>
Say, more than one sequence of a route-map uses the same named entity
in its match clause. After that entity is removed from any one of the
route-map sequences, any further changes made to that entity doesn't
dynamically take effect.
A reference counter, that allows the named entity to keep a count of
the route-maps dependent on it, has been introduced to address this issue.
Signed-off-by: NaveenThanikachalam <nthanikachal@vmware.com>
Set the bgp default nexthop value of IPv6 to the local ipv6 addr of the
tcp connection like IPv4. Fixed the problem of route with empty nexthop
advertised to the peer when zebra is not running.
* bgp_zebra.c: (bgp_zebra_nexthop_set) Set IPv6 bgp default nexthop value.
Signed-off-by: Faicker Mo <faicker.mo@ucloud.cn>
Introducing a 3rd state for route_map_apply library function: RMAP_NOOP
Traditionally route map MATCH rule apis were designed to return
a binary response, consisting of either RMAP_MATCH or RMAP_NOMATCH.
(Route-map SET rule apis return RMAP_OKAY or RMAP_ERROR).
Depending on this response, the following statemachine decided the
course of action:
Action: Apply route-map match and return the result (RMAP_MATCH/RMAP_NOMATCH)
State1: Receveived RMAP_MATCH
THEN: If Routemap type is PERMIT, execute other rules if applicable,
otherwise we PERMIT!
Else: If Routemap type is DENY, we DENYMATCH right away
State2: Received RMAP_NOMATCH, continue on to next route-map, otherwise,
return DENYMATCH by default if nothing matched.
With reference to PR 4078 (https://github.com/FRRouting/frr/pull/4078),
we require a 3rd state because of the following situation:
The issue - what if, the rule api needs to abort or ignore a rule?:
"match evpn vni xx" route-map filter can be applied to incoming routes
regardless of whether the tunnel type is vxlan or mpls.
This rule should be N/A for mpls based evpn route, but applicable to only
vxlan based evpn route.
Today, the filter produces either a match or nomatch response regardless of
whether it is mpls/vxlan, resulting in either permitting or denying the
route.. So an mpls evpn route may get filtered out incorrectly.
Eg: "route-map RM1 permit 10 ; match evpn vni 20" or
"route-map RM2 deny 20 ; match vni 20"
With the introduction of the 3rd state, we can abort this rule check safely.
How? The rules api can now return RMAP_NOOP (or another enum) to indicate
that it encountered an invalid check, and needs to abort just that rule,
but continue with other rules.
Question: Do we repurpose an existing enum RMAP_OKAY or RMAP_ERROR
as the 3rd state (or create a new enum like RMAP_NOOP)?
RMAP_OKAY and RMAP_ERROR are used to return the result of set cmd.
We chose to go with RMAP_NOOP (but open to ideas),
as a way to bypass the rmap filter
As a result we have a 3rd state:
State3: Received RMAP_NOOP
Then, proceed to other route-map, otherwise return RMAP_PERMITMATCH by default.
Signed-off-by:Lakshman Krishnamoorthy <lkrishnamoor@vmware.com>
Inconsistent use of a string pointer led to improperly terminated
strings (terminated too soon)
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
When debugging I was having a hard time correlating some data and noticed that
a particular debug was not being very useful.
Signed-off-by: Donald Sharp <sharpd@cumulusnstworks.com>
Was getting a couple of compile errors with newer compilers
when compiling rpki around the prefix length. Convert
them over to prefix2str as that is all it is doing.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The SO_MARK socket option was being used pre vrf to allow for the
separation of the front panel -vs- the management port. This
was facilitated by a ip rule. Since this is undocumented anywhere
in our system( other than old commits see
ed40466af8 ). We should remove this
because this will cause interference with people using rules
and are not aware of this offshoot of functionality.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When issuing a `show bgp neighbor...` command display to the
end user the FD used for communication.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The functions nexthop_same() does not check the resolved
nexthops so I don't think this function is even needed
anymore.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Problem reported with deleting the default BGP instance where there
are vrf instances that depend on it (like l2vpn evpn vrfs). Since
importing for vrf route-leaking also requires the existence of the
default instance, disallowing deleting the BGP default instance if
anyt vrf instance is also defined.
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
We already show this information in `show [ip] bgp <prefix`, thus why don't
show it in global output. It's very handy when using at scale and to see
the whole picture instead of resolving neighbor manually.
It will show FQDN only if `bgp default show-hostname` is toggled.
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
I mistakenly assumed that something called "FIFO" would primarily be
used by removing items from the front. This isn't the case for the
adv_fifo... so use a DLIST there to make sure deletions from the middle
of the queue are fast.
Signed-off-by: David Lamparter <equinox@diac24.net>
updgrp_hash_key_make() uses the PEER_UPDGRP_AF_FLAGS for the key.
PEER_UPDGRP_AF_FLAGS contains the neigbor flags.
If user do no neighbor <> send community large, then the hash key
does not change and BGP does not send update for large community change.
Added the PEER_FLAG_SEND_LARGE_COMMUNITY in PEER_UPDGRP_AF_FLAGS.
After this the hash key gets changed and update will be processed
with large community.
Signed-off-by: vishaldhingra<vdhingra@vmware.com>
The flag PEER_FLAG_RSERVER_CLIENT is never set on peer->flags
and as such testing the flag for not being set will never
cause the if statement to be not entered.
Conversely setting update to 0 and then testing if (update && ...
will always cause another if statement to be never called, remove
it as well.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
As part of detailed bgp route detail, include the
reason why a route was selected as best path.
robot# show bgp ipv4 uni 223.255.254.0
BGP routing table entry for 223.255.254.0/24
Paths: (1 available, best #1, table default)
Advertised to non peer-group peers:
annie(192.168.201.136)
64539 15096 6939 7473 3758 55415
192.168.201.136 from annie(192.168.201.136) (192.168.201.136)
Origin IGP, valid, external, bestpath-from-AS 64539, best (First path received)
Last update: Wed May 15 21:15:48 2019
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Store in bgp_node the reason why we choose a particular
best path over another. At this point we do not do
anything other than just store this data when we make
the decision. Future commits will display it.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Instead of just passing in the prefix, pass in the particular
bgp_node we are using.
This is setup for a future commit to use this data.
The long term goal is to collect data about why
a particular bgp_path_info was selected as best and
to display that reason.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The bgp_attr_extcom_tunnel_type does not properly
compile with warnings turned on due to recent change.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
It doesn't make much sense for a hash function to modify its argument,
so const the hash input.
BGP does it in a couple places, those cast away the const. Not great but
not any worse than it was.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
This diff contains 2 parts:
1. Extract the tunnel type info from bgp extended communities.
2. Make rfapi use this common tunnel type ap
Signed-off-by: Lakshman Krishnamoorthy <lkrishnamoor@vmware.com>
Add an upspecified option to the AFI enum and update
switch statements using it in bgpd and pbrd.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Issue 1:
Getting an empty json without any warning message, while executing
the command "show ip bgp neighbor <x.x.x.x> advertised-routes
json" when the bgp instance is not present or getting created.
Issue 2:
Getting an empty json without any warning message, while executing
the command "show ip bgp vrf/view <name> advertised-routes json"
when the specified view/vrf is not present.
Fix:
Display warning message while executing the above cli commands, when
the bgp instance, specified vrf is not present.
Signed-off-by: Sarita Patra <saritap@vmware.com>
This commit fixes a previous commit:
"bfdd: remove operational bfd sessions from remote daemons"
where the handling of unregister call triggers the deletion of bfd
session.
Actually, the BFD session should not be deleted, while bgp session is
configured with BGP. this permits to receive BFD events up, and permit
quicker reconnecion.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
new vty command is added:
neighbor XXX bfd check-control-plane-failure
this command will enforce the check of bgp controlplane, when bfd
detects changes in the dataplane.
- at configuration, the cbit will be set if that command is executed
- at flapping time, if the command is configured and remote cbit is set
accordingly, then the bfd event will be ignored.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
bfd cbit is a value carried out in bfd messages, that permit to keep or
not, the independence between control plane and dataplane. In other
words, while most of the cases plan to flush entries, when bfd goes
down, there are some cases where that bfd event should be ignored. this
is the case with non stop forwarding mechanisms where entries may be
kept. this is the case for BGP, when graceful restart capability is
used. If BFD event down happens, and bgp is in graceful restart mode, it
is wished to ignore the BFD event while waiting for the remote router to
restart.
The changes take into account the following:
- add a config flag across zebra layer so that daemon can set or not the
cbit capability.
- ability for daemons to read the remote bfd capability associated to a bfd
notification.
- in bfdd, according to the value, the cbit value is set
- in bfdd, the received value is retrived and stored in the bfd session
context.
- by default, the local cbit announced to remote is set to 1 while
preservation of the local path is not set.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Bug: If there are 2 different prefixes under an rd, the
output of "show bgp l2vpn evpn json" would print only one of the
prefixes.
RCA: prefix info was added to the json_object once per rd. Hence,
prefix and rd were added just once, as the loop iterated over all
the prefixes and paths.
This is related to my earlier commit that went in via PR 4283:
https://github.com/FRRouting/frr/pull/4283
Signed-off-by: Lakshman Krishnamoorthy <lkrishnamoor@vmware.com>
The route_map_event_hook callback was passing the `route_map_event_t`
to each individual interested party. No-one is ever using this data
so let's cut to the chase a bit and remove the pass through of data.
This is considered ok in that the routemap.c code came this way
originally and after 15+ years no-one is using this functionality.
Nor do I see any `easy` way to do anything useful with this data.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Display a debug message while sending a BGP route if the route is filtered by a
route-map.
Debug for incoming filtered route is already present.
Signed-off-by: Ameya Dharkar <adharkar@vmware.com>
This is causing interop issues with vendors. According to the RFC,
receiver should ignore the NEXT_HOP attribute with MP_REACH_NLRI
present.
Signed-off-by: nikos <ntriantafillis@gmail.com>
Each of Lua's major versions are incompatible with each other. Ubuntu,
at least, does not provide a single liblua.so or /usr/include/lua; all
SOs and headers are versioned, e.g. liblua5.3.so and
/usr/include/lua5.3. There's already an m4 macro in the GNU collection
to handle this situation, so let's use that.
This allows building with Lua enabled to work on platforms other than
Fedora.
* Move lib/lua.[ch] -> lib/frrlua.[ch] to prevent path conflicts
* Fix configure.ac search for proper CPP and linker flags
* Add Lua include path to AM_CPPFLAGS
* Update vtysh/extract.pl.in
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
This fix aims to reduce the load on BGPD when certain
exisiting configurations are replayed.
Specifically, the fix prevents BGPD from processing
routes when the following already existing configurations
are replayed:
1) A match criteria is configured within a route-map.
2) When "call" is invoked within a route-map.
3) When a route-map is tied to a BGP neighbor.
Signed-off-by: NaveenThanikachalam <nthanikachal@vmware.com>
lcommunity_list_show uses the wrong macro to calculate the style.
Use the correct one LARGE_COMMUNITY_LIST_STANDARD.
Signed-off-by: vishaldhingra<vdhingra@vmware.com>
vrf_id parameter is added to the api of bfd_client_sendmsg().
this permits being registered to bfd from a separate vrf.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
lcomm-list is configured and attached to route-map via match clause.
If you modify the lcomm-list then it is not taking into effect via routemap.
Signed-off-by: vishaldhingra <vdhingra@vmware.com>
This is causing interop issues with vendors. According to the RFC,
receiver should ignore the NEXT_HOP attribute with MP_REACH_NLRI
present.
Signed-off-by: nikos ntriantafillis@gmail.com
This macro:
- Marks ZAPI callbacks for readability
- Standardizes argument names
- Makes it simple to add ZAPI arguments in the future
- Ensures proper types
- Looks better
- Shortens function declarations
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
The vpn variable in bgp_evpn_advertise_svi_ip_vni must
be non-null as such it is impossible to ever need the
!vpn test case.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The label value is set to MPLS_LABEL_NONE at the start
of the function and we never modify it, testing it for
BGP_PREVENT_VRF_2_VRF_LEAK equality will never be true
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Again, the FIFO_* stuff in lib/fifo.h is no different from a simple
unsorted list. Just use DECLARE_LIST here so we can get rid of FIFO_*.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
The FIFO_* stuff in lib/fifo.h is no different from a simple unsorted
list. Just use DECLARE_LIST here so we can get rid of FIFO_*.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Prevent the ebgp sender from changing the nexthop( which is same as the ebgp neighbour ipv6 address),
while sending updates to its ipv6 neighbor.So,if the nexthop of the ipv6 route is same as the ipv6
neighbour address do not change the next hop to your own ip.
Signed-off-by: Biswajit Sadhu <sadhub@vmware.com>
Prevent IPv6 routes received via a ibgp session with one of its own interface
ip as nexthop from getting installed in the BGP table.
Implemented IPV6 HASH table, where we need to add any ipv6 address as they
gets configured and delete them from the HASH table as the ipv6 addresses
get unconfigured. The above hash table is used to verify if any route learned
via BGP has nexthop which is equal to one of its its connected ipv6 interface.
Signed-off-by: Biswajit Sadhu sadhub@vmware.com
The l2vni (bgpevpn instance) was maintaining a back pointer to the
tenant vrf without locking it. This would result in bgp_terminate crashing
as the tenant-vrf is released before the underlay-vrf (vpn->bgp_vrf->l2vnis
is NULL). Call stack -
BGP: [bt 3] /lib/libfrr.so.0(listnode_delete+0x11) [0x7f041c967f51]
BGP: [bt 4] /usr/lib/frr/bgpd(bgp_evpn_free+0x26) [0x55e3428eea46]
BGP: [bt 5] /lib/libfrr.so.0(hash_iterate+0x4a) [0x7f041c95f00a]
BGP: [bt 6] /usr/lib/frr/bgpd(bgp_evpn_cleanup+0x22) [0x55e3428f0a72]
BGP: [bt 7] /usr/lib/frr/bgpd(bgp_free+0x180) [0x55e342955f50]
PIM: vxlan SG (*,239.1.1.111) term mroute-up del
BGP: [bt 8] /usr/lib/frr/bgpd(bgp_delete+0x43a) [0x55e342959d7a]
BGP: [bt 9] /usr/lib/frr/bgpd(sigint+0xee) [0x55e3428d6a5e]
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Reviewed-by: Vivek Venkataraman <vivek@cumulusnetworks.com>
Reviewed-by: Chirag Shah <chirag@cumulusnetworks.com>
IMET/type-3 routes are used by VTEPs to advertise the flood mode for BUM
traffic via the PMSI tunnel attribute. If a type-3 route is not rxed from
a remote-VTEP we default to "no-head-end-rep" for that remote-VTEP. In such
cases static-config such as PIM is likely used for BUM flooding.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
IMET route is optional if the flood mode is PIM-SM and serves
no functional purpose. So this change limits type-3 route generation
to flood-mode=head-end-replication.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
If PIM-SM if used for BUM flooding the multicast group address can be
configured per-vxlan-device. BGP receives this config from zebra via
the L2 VNI add/update.
Sample output -
root@TORS1:~# vtysh -c "show bgp l2vpn evpn vni 1000" |grep Mcast
Mcast group: 239.1.1.100
root@TORS1:~#
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
EVPN routes (type-2/type-5) are imported from
default bgp instance (where they are learnt) to
non-default vrf instance.
When a bgp instance (default) is deleted,
unimport evpn routes from vrfs.
In absence of unimport, the imported routes in vrf
has parent path info points to default instance's path
info which is no longer valid (if instance is deleted).
When accessing parent path info leads to a crash
in non-default vrf instance.
The bgp instance is not cleaned up when
'no router bgp ASN' is performed, the instance's
reference count remains for evpn imported routes.
Ticket:CM-24484
Reviewed By:
Testing Done:
Validated via learning EVPN type-2/type-5 routes in symmetric
routing scenario.
The routes are imported to VRFs based on corresponding
L3VNI. When the default instance is removed, the evpn routes
are cleaned up from the VRF instance.
TURTLE(config)# do show bgp vrf vrf3 ipv4 unicast
Network Next Hop Metric LocPrf Weight Path
*> 70.1.0.0/16 0.0.0.0 32768 i
s 70.1.1.24/32 110.0.0.2 0 65100 65002 i
s> 110.0.0.2 0 65100 65002 i
s 70.1.1.43/32 110.0.0.4 0 65100 65004 i
s> 110.0.0.4 0 65100 65004 i
TURTLE(config)# no router bgp 65050
TURTLE(config)# do show bgp vrf vrf3 ipv4 unicast
No BGP prefixes displayed, 0 exist
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
if bfd comes back up, and a bgp reconnection is in progress, theorically
it should be necessary to wait for the end of the reconnection process.
however, since that reconnection process may take some time, update the
fsm by cancelling the connect timer. This done, one just have to call
the start timer.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Bgp periodically tries to reconnect, while the connection
is down. When bfd event comes up, BGP is not aware that bfd connection
is up, then BGP can not adapt its reconnection timer. The modification
is here to force BGP to restart, when BFD event comes up, and BGP has
not yet established.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Co-authored-by: Donald Sharp <sharpd@cumulusnetworks.com>
Co-authored-by: Quentin Young <qlyoung@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
This command is added to provide detailed information. It will be
useful in troubleshooting as we will be able to dump all detailed info
using a single command.
"show bgp l2vpn evpn route [detail] ...". Additional filtering
can be done by providing type of the route.
Command will display the detailed content for all rd and macs-ip as
displayed by "show bgp l2vpn evpn route rd <> mac <>" for a single
rd, mac, ip from the global bgp routing table.
Ticket: CM-24397
Signed-off-by: Nitin Soni <nsoni@cumulusnetworks.com>
Reviewed-by:
Testing-Done:
This command is added to provide detailed information. It will be
useful in troubleshooting as we will be able to dump all detailed info
using a single command.
"net show bgp evpn route vni <all|id> [detail]". Additional filtering
can be done by providing vtep ip.
Command will display the detailed content for all vni and macs as
displayed by "net show bgp evpn route vni <> mac <> ip <>" for a single
vni, mac, ip.
Ticket: CM-24397
Signed-off-by: Nitin Soni <nsoni@cumulusnetworks.com>
Reviewed-by:
Testing-Done:
The bgp_path_info_new function whenever it was called
pretty much duplicated the info_make function call. So
convert over to using it and remove the bgp_path_info_new
function so people are not tempted.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The creation of a new `struct bgp_path_info` requires a legitimate
peer being passed in for creation. There exists no code paths
where this is not true. As such checking pi->peer for null convinces
SA that it might happen.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Move &rpki_cmd from VIEW to ENABLE. A non-enabled session could
enter into the rpki command node and exit into glocalb config mode
without having to enable.
Move &show_rpki* from ENABLE to VIEW. Allow non-enabled user to
view cache state and prefix table state.
Signed-off-by: David Teach <dteach@routeviews.org>
Avoid tracking 0.0.0.0/32 nexthop with RIB.
When routes are aggregated,
the originate of the route becomes self.
Do not track nexthop self (0.0.0.0) with rib.
Ticket: CM-24248
Testing Done:
Before fix-
tor-11# show ip nht vrf all
VRF blue:
0.0.0.0
unresolved
Client list: bgp(fd 16)
VRF default:
VRF green:
VRF magenta:
0.0.0.0
unresolved
Client list: bgp(fd 16)
After fix-
tor-11# show ip nht vrf all
VRF blue:
VRF default:
VRF green:
VRF magenta:
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
