Issue #9983 explains what is wrong with the GR helper mode.
To unblock the CI that fails almost all the time on the ospf_gr_topo1
test, remove the commands and disable the test. Also add a reminder to
completely remove the helper mode if no one fixes the code in a month.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
It's strictly optional, but… the backtraces are really much better.
Specifically, `libunwind` is notably more capable in figuring out
function names compared to glibc/libexecinfo `backtrace_symbols()`.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
... need to ignore TLS sections, their address is effectively
meaningless but can overlap other sections we actually need to access.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
show/clear DEFUNs always require either peer label or IP address to be
specified, so if `label` is NULL then `peer_str` is definitely not NULL.
But Coverity doesn't know about that, so it complains about possible
NULL dereference of `peer_str`. This commit should make Coverity happy.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
`assert.h` -> `xref.h` -> `typesafe.h` -> `assert.h`
Might be possible to do this more cleanly some way, but that way is not
obvious, so here's the "simple & dumb" approach.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Looks much prettier if `libunwind` is available, but works with glibc or
libexecinfo's `backtrace()` too.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
* Separate process into stages; stage 1 is preparation, stage 2 is
staging, stage 3 is publishing
* Reorder some steps
* Remove some steps
* Elaborate on some steps
* Add some steps
Signed-off-by: Quentin Young <qlyoung@nvidia.com>
pim-vxlan uses periodic null registers to bootstrap a new (VTEP, mcast-grp).
These null registers were not being sent if the (S, G) was already present
and in a register-join state.
Ticket: #2848079
Signed-off-by: Anuradha Karuppiah <anuradhak@nvidia.com>
Description:
timerval datastructure is being used without initialization.
Using these uninitialized parameters can lead unexpected results
so initializing before using it.
Signed-off-by: Rajesh Girada <rgirada@vmware.com>
Clarify process for editing changelog and updating the configure.ac
project version, as well as procedure for doing sanity testing prior to
creating the release tag.
Signed-off-by: Quentin Young <qlyoung@nvidia.com>
Problem:
L2-VNI SVI down followed by L2-VNI's vxlan device
deletion leads to stale entry into L3VNI's
L2-VNI list.
Solution:
When L2-VNI associated SVI is down, default vrf
is the new tenant vrf.
Remove L2-VNI from L3VNI's l2vni list as
L3VNI/VRF is no longer valid in absence of associated
SVI.
When SVI is up re-add L2-VNI into associated VRF's
L3VNI.
The above remove/add from the L3VNI's L2VNI list is
already done when vxlan or L2-VNI is flaped, just need
to handle when SVI is flapped.
Ticket:#2817127
Reviewed By:
Testing Done:
After deleting SVI following by L2-VNI deletion,
L3VNI's L2-VNI list delets the L2-VNI. (no stale entry).
After adding back SVI/L2-VNI, L3VNI list adds back the
L2-VNI and it is associated right tenant VRF.
Signed-off-by: Chirag Shah <chirag@nvidia.com>
frr-reload fails to recognize wildcard "*" for
member address in frr.conf/runing-config as cli
syntax expects in v4 address format.
Ticket: #2816923
Testing:
Without fix:
running config:
ip msdp mesh-group foo1 member *
Frr reoad failure log:
2021-11-02 11:05:04,317 INFO: Loading Config object from vtysh show running
line 5: % Unknown command: ip msdp mesh-group foo1 member *
Traceback (most recent call last):
File "/usr/lib/frr/frr-reload.py", line 1950, in <module>
With fix:
--------
running config displays:
ip msdp mesh-group foo1 member 0.0.0.0
Signed-off-by: Chirag Shah <chirag@nvidia.com>
... its only purpose was to serve as a footgun, and all such uses have
been eliminated now.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This can't really be run as part of CI, it's intended as a helper
instead, to use manually after poking around in the c-ares binding code.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
common_cli.c disables logging by default so stdio is usable as vty
without log messages getting strewn inbetween. This the right thing for
most tests, but not all; sometimes we do want log messages.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
The `struct thread **ref` that the thread code takes is written to and
needs to stay valid over the lifetime of a thread. This does not hold
up if thread pointers are directly put in a `vector` since adding items
to a `vector` may reallocate the entire array. The thread code would
then write to a now-invalid `ref`, potentially corrupting entirely
unrelated data.
This should be extremely rare to trigger in practice since we only use
one c-ares channel, which will likely only ever use one fd, so the
vector is never resized. That said, c-ares using only one fd is just
plain fragile luck.
Either way, fix this by creating a resolver_fd tracking struct, and
clean up the code while we're at it.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
949aaea5 removed debugs from all topotests, but this test relies on the
debug logs so it constantly fails now.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
When our CI test system is under high load, expecting bfd to
converge in under 2 seconds is not going to happen. Modify the test
suites to just ensure that things reconvderge.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Debugs take up a significant amount of cpu time as well as
increased disk space for storage of results. Reduce test
over head by removing the debugs, Hopefully this helps
alleviate some of the overloading that we are seeing in
our CI systems.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
These are just used to iterate over active vty sessions, a vector is a
weird choice there.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
These had no remaining users for a while now. The logging backend has
its own list of receivers.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
AFI/SAFI is handled in bgp_vty_find_and_parse_afi_safi_bgp() properly for
IPv4, but not for IPv6. Let's have it enabled for IPv6 by default.
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
AFI/SAFI is handled in bgp_vty_find_and_parse_afi_safi_bgp() properly for
IPv4, but not for IPv6. Let's have it enabled for IPv6 by default.
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
