Description:
EVPN routes marked as imported routes,
having bgp path info's extra, where as
they are not truly imported routes,
so original bgp info will be null.
Co-authored-by: Kantesh Mundaragi <kmundaragi@vmware.com>
Signed-off-by: Iqra Siddiqui <imujeebsiddi@vmware.com>
Description:
Added a macro which optimises some part of the code.
Co-authored-by: Santosh P K <sapk@vmware.com>
Co-authored-by: Kantesh Mundaragi <kmundaragi@vmware.com>
Signed-off-by: Iqra Siddiqui <imujeebsiddi@vmware.com>
Description:
Incorrect behavior during best path selection for the imported routes.
Imported routes are always treated as eBGP routes.
Change is intended for fixing the issues related to
bgp best path selection for leaked routes:
- FRR does ecmp for the imported routes,
even without any ecmp related config.
If the same prefix is imported from two different VRFs,
then we configure the route with ecmp even without
any ecmp related config.
- Locally imported routes are preferred over imported
eBGP routes.
If there is a local route and eBGP learned route
for the same prefix, if we import both the routes,
imported local route is selected as best path.
- Same route is imported from multiple tenant VRFs,
both imported routes point to the same VRF in nexthop.
- When the same route with same nexthop in two different VRFs
is imported from those two VRFs, route is not installed as ecmp,
even though we had ecmp config.
- During best path selection, while comparing the paths for imported routes,
we should correctly refer to the original route i.e. the ultimate path.
- When the same route is imported from multiple VRF,
use the correct VRF while installing in the FIB.
- When same route is imported from two different tenant VRFs,
while comparing bgp path info as part of bgp best path selection,
we should ideally also compare corresponding VRFs.
See-also: https://github.com/FRRouting/frr/files/7169555/FRR.and.Cisco.VRF-Lite.Behaviour.pdf
Co-authored-by: Santosh P K <sapk@vmware.com>
Co-authored-by: Kantesh Mundaragi <kmundaragi@vmware.com>
Signed-off-by: Iqra Siddiqui <imujeebsiddi@vmware.com>
the fix consists in parsing the ext community list ipv6 by taking
account the size of the ecommunity val size.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
During zebra shutdown, we clear out the LSP workqueue. The LSPs
will be uninstalled and freed during the shutdown process, so
just ignore any LSPs that happen to be on the workqueue.
Signed-off-by: Mark Stapp <mstapp@nvidia.com>
`pim_ifchannel_ifjoin_switch()` changes flags that `pim_forward_stop()`
looks at. This leads to data flow continuing until we have some reason
to sync state again.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
(This is mostly just to exercise the code, the actual replacement needs
to be a cocci script.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
... these should probably have been added ages ago.
`json_object_string_addf(json, "key", "%pFX", prefix)` is super useful.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
... this is copypasted all over the codebase & should've been a helper
to begin with really.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Somewhere along the line core-files stopped being generated
with the running of the topotests. With this change we now
see this:
sharpd@eva /t/topotests> find . -name '*.dmp' -print
./ospfv3_basic_functionality.test_ospfv3_asbr_summary_topo1/r0/ospf6d_core-sig_6-pid_430478.dmp
sharpd@eva /t/topotests> sudo gdb /usr/lib/frr/ospf6d ./ospfv3_basic_functionality.test_ospfv3_asbr_summary_topo1/r0/ospf6d_core-sig_6-pid_430478.dmp
GNU gdb (Debian 10.1-1.7) 10.1.90.20210103-git
Copyright (C) 2021 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.
Type "show copying" and "show warranty" for details.
This GDB was configured as "x86_64-linux-gnu".
Type "show configuration" for configuration details.
For bug reporting instructions, please see:
<https://www.gnu.org/software/gdb/bugs/>.
Find the GDB manual and other documentation resources online at:
<http://www.gnu.org/software/gdb/documentation/>.
For help, type "help".
Type "apropos word" to search for commands related to "word"...
Reading symbols from /usr/lib/frr/ospf6d...
[New LWP 430478]
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1".
Core was generated by `/usr/lib/frr/ospf6d --log file:ospf6d.log --log-level debug -d'.
Program terminated with signal SIGABRT, Aborted.
50 ../sysdeps/unix/sysv/linux/raise.c: No such file or directory.
(gdb) bt
(gdb)
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
At some scale we eventually run out of room displaying v4/v6 route
totals for `show zebra client summ`:
janelle# show zebra client summ
Name Connect Time Last Read Last Write IPv4 Routes IPv6 Routes
--------------------------------------------------------------------------------
bgp 04w0d18h 00:00:19 00:01:2411729127/4052681 2037786/903094
This total over ran the space in just a little over a week of uptime.
Expand to have a bit more room.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The dplane_ctx_get_pbr_ipset_entry function only
failed when the caller did not pass in a valid
usable pointer. Change the code to assert on
a pointer not being passed in and remove the
bool return
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The only time this function ever failed is when
the developer does not pass in a usable pointer
to place the data in. Change it to an assert
to signify to the end developer that is what
we want and then remove all the if checks
for failure
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The function call dplane_ctx_get_pbr_ipset only
returns false when the calling function fails to
pass in a valid ipset pointer. This should
be an assertion issue since it's a programming
issue as opposed to an actual run time issue.
Change the function call parameter to not return
a bool on success/fail for a compile time decision.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
rp-count==0 isn't a broken BSM, it just means the BSR no longer has any
Candidate RPs for the group range. Previous behavior is badly mistaken
since it stops processing the entire packet.
Fix to correctly remove group range on rp-count==0 and continue
processing remainder of the packet.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This is implicitly checked by the "verify mroute" below, but it's much
more helpful to explicitly check in advance.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
NHT won't have a result yet when we get the first BSM from a new BSR.
Hence, the first packet(s) are lost, since their RPF validation fails.
Re-add the blocking RPF check that was there before (though in a much
more sensible manner.)
Also nuke the now-unused pim_nexthop_match* functions.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
