This one also needed a bit of shuffling around, but MTYPE_RE is the only
one left used across file boundaries now.
Signed-off-by: David Lamparter <equinox@diac24.net>
Back when I put this together in 2015, ISO C11 was still reasonably new
and we couldn't require it just yet. Without ISO C11, there is no
"good" way (only bad hacks) to require a semicolon after a macro that
ends with a function definition. And if you added one anyway, you'd get
"spurious semicolon" warnings on some compilers...
With C11, `_Static_assert()` at the end of a macro will make it so that
the semicolon is properly required, consumed, and not warned about.
Consistently requiring semicolons after "file-level" macros matches
Linux kernel coding style and helps some editors against mis-syntax'ing
these macros.
Signed-off-by: David Lamparter <equinox@diac24.net>
Neither tabs nor newlines are acceptable in syslog messages. They also
break line-based parsing of file logs.
Signed-off-by: David Lamparter <equinox@diac24.net>
a) Use appropriate %p modifiers for output
2) Display vrf name in addition to vrf id
c) Remove now unused function
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
For the sake of Segment Routing (SR) and Traffic Engineering (TE)
Policies there's a need for additional infrastructure within zebra.
The infrastructure in this PR is supposed to manage such policies
in terms of installing binding SIDs and LSPs. Also it is capable of
managing MPLS labels using the label manager, keeping track of
nexthops (for resolving labels) and notifying interested parties about
changes of a policy/LSP state. Further it enables a route map mechanism
for BGP and SR-TE colors such that learned BGP routes can be mapped
onto SR-TE Policies.
This PR does not introduce any usable features by now, it is just
infrastructure for other upcoming PRs which will introduce 'pathd',
a new SR-TE daemon.
Co-authored-by: Renato Westphal <renato@opensourcerouting.org>
Co-authored-by: GalaxyGorilla <sascha@netdef.org>
Signed-off-by: Sebastien Merle <sebastien@netdef.org>
Improve vty output for routes and lsps with backups, including
json. Simplify or correct some code that uses both primary and
backup nexthops in dplane, nht.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Include backup nexthops when examining routes that resolve
NHT requests. Include installed backups when sending nexthops
in zapi messages to client daemons.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Every time zebra receives a ZEBRA_PW_SET, zebra should call
zebra_evaluate_rnh.
This fixes a race condition where zebra sometimes fails to install a
pseudowire that is 'up', and has a reachable next hop.
Signed-off-by: Karen Schoener <karen@voltanet.io>
Some logging systems are, er, "allergic" to tabs in log messages.
(RFC5424: "The syslog application SHOULD avoid octet values below 32")
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
this flag can be used when one routing daemon wants to force his route
to be injected prioritary with other routes, including selected routes.
for that, do not forget to update the new_selected pointer in the zebra
nexthop tracking algorithm.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Embed nexthop-group, which is just a pointer, in the zebra
nexthop-hash-entry object, rather than mallocing one.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Use a per-nexthop flag to indicate the presence of labels; add
some utility zapi encode/decode apis for nexthops; use the zapi
apis more consistently.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Replace the existing list of nexthops (via a nexthop_group
struct) in the route_entry with a direct pointer to zebra's
new shared group (from zebra_nhg.h). This allows more
direct access to that shared group and the info it carries.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Reduce the api for deleting nexthops and the containing
group to just one call rather than having a special case
and handling it separately.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
In the route_entry we are keeping a non pointer based
nexthop group, switch the code to use a pointer for all
operations here and ensure we create and delete the memory.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This change addresses the following :
1. Ensures zlog_debug should be under DEBUG macro check
2. Ensures zlog_err and zlog_warn wherever applicable.
3. Removed few posivite logs from fpm handling, whose frequency is high.
Signed-off-by: vishaldhingra <vdhingra@vmware.com>
Use the zserv_client_close hook to cleanup all MPLS labels advertised
by a zclient when it disconnects. We were doing this cleanup for
ldpd only, but now we have other daemons that are MPLS aware,
like ospfd (due to the new Segment Routing feature).
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
even if vty commands were available, the default resolution command was
working only for the first vrf configured. others were ignored. Also,
for nexthop, resolution was working for all vrfs, and not the specific
one.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
The 'show ip import-check A.B.C.D` code was generating
a /32 prefix for comparison. Except import-check was
being used by bgp to track networks. So they could
have received a /24( or anything the `network A.B.C.D/M`
statement specifies ).
Consequently when we do a `show ip import-check A.B.C.D`
we would never find the network but a `show ip import-check |
grep A.B.C.D` would find it.
Fix the exact comparison to a match.
For the `show ip nht A.B.C.D` case we are comparing
a /32 to a /32 so prefix_match will work still.
While a `show ip import-check A.B.C.D` will now show
the expected behavior as well.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The flag ROUTE_ENTRY_NEXTHOPS_CHANGED is only ever set or unset.
Since this flag is not used for anything useful, remove from system.
By changing this flag we have re-ordered `internalStatus' of json
output of zebra rib routes. Go through and fix up tetsts to
use the new values.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Problem reported where certain routes were not being passed on to
clients if they were operated on while still queued for kernel
installation. Changed it to defer working on entries that were
queued to dplane so we could operate on them after getting an
answer back from kernel installatino.
Ticket: CM-25480
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Introducing a 3rd state for route_map_apply library function: RMAP_NOOP
Traditionally route map MATCH rule apis were designed to return
a binary response, consisting of either RMAP_MATCH or RMAP_NOMATCH.
(Route-map SET rule apis return RMAP_OKAY or RMAP_ERROR).
Depending on this response, the following statemachine decided the
course of action:
State1:
If match cmd returns RMAP_MATCH then, keep existing behaviour.
If routemap type is PERMIT, execute set cmds or call cmds if applicable,
otherwise PERMIT!
Else If routemap type is DENY, we DENYMATCH right away
State2:
If match cmd returns RMAP_NOMATCH, continue on to next route-map. If there
are no other rules or if all the rules return RMAP_NOMATCH, return DENYMATCH
We require a 3rd state because of the following situation:
The issue - what if, the rule api needs to abort or ignore a rule?:
"match evpn vni xx" route-map filter can be applied to incoming routes
regardless of whether the tunnel type is vxlan or mpls.
This rule should be N/A for mpls based evpn route, but applicable to only
vxlan based evpn route.
Also, this rule should be applicable for routes with VNI label only, and
not for routes without labels. For example, type 3 and type 4 EVPN routes
do not have labels, so, this match cmd should let them through.
Today, the filter produces either a match or nomatch response regardless of
whether it is mpls/vxlan, resulting in either permitting or denying the
route.. So an mpls evpn route may get filtered out incorrectly.
Eg: "route-map RM1 permit 10 ; match evpn vni 20" or
"route-map RM2 deny 20 ; match vni 20"
With the introduction of the 3rd state, we can abort this rule check safely.
How? The rules api can now return RMAP_NOOP to indicate
that it encountered an invalid check, and needs to abort just that rule,
but continue with other rules.
As a result we have a 3rd state:
State3:
If match cmd returned RMAP_NOOP
Then, proceed to other route-map, otherwise if there are no more
rules or if all the rules return RMAP_NOOP, then, return RMAP_PERMITMATCH.
Signed-off-by: Lakshman Krishnamoorthy <lkrishnamoor@vmware.com>
1) If we are moving the nexthop we are tracking to
a new rn in the rib, then we know that the route
to get to that nexthop has changed. As such
we should notify the upper level.
This manifested itself because the code had a trigraph `?`
in the wrong order. Put the comparison in the right order.
2) If we are re-matching to the same rn and we call compare_state
then we need to see if our stored nexthops are the same or different.
If they are the same we should not notify. If they are different
we should notify. compare_state was only comparing the flags
on a route and since those are not necessarily the right flags
to look at( and we are well after the fact that the route has
already changed and been processed ) let's just compare
the nexthops to see if they are the same or different.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Add a expected count for the route node we will be processing
as part of nexthop resolution and modify the type to display
a useful string of what the type is instead of a number.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Update pbrd to properly handle nexthop tracking.
When we get a notification that a change happened on a nexthop,
re-install it if its still valid.
Before, we were running over all routes and re-queueing them if they
were PBR routes. This commit removes that and puts all the processing
in PBR instead.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
the interface search done was not looking in the appropriate zns. The
display was then wrong. Update the show command with the correct zns.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Introducing a 3rd state for route_map_apply library function: RMAP_NOOP
Traditionally route map MATCH rule apis were designed to return
a binary response, consisting of either RMAP_MATCH or RMAP_NOMATCH.
(Route-map SET rule apis return RMAP_OKAY or RMAP_ERROR).
Depending on this response, the following statemachine decided the
course of action:
Action: Apply route-map match and return the result (RMAP_MATCH/RMAP_NOMATCH)
State1: Receveived RMAP_MATCH
THEN: If Routemap type is PERMIT, execute other rules if applicable,
otherwise we PERMIT!
Else: If Routemap type is DENY, we DENYMATCH right away
State2: Received RMAP_NOMATCH, continue on to next route-map, otherwise,
return DENYMATCH by default if nothing matched.
With reference to PR 4078 (https://github.com/FRRouting/frr/pull/4078),
we require a 3rd state because of the following situation:
The issue - what if, the rule api needs to abort or ignore a rule?:
"match evpn vni xx" route-map filter can be applied to incoming routes
regardless of whether the tunnel type is vxlan or mpls.
This rule should be N/A for mpls based evpn route, but applicable to only
vxlan based evpn route.
Today, the filter produces either a match or nomatch response regardless of
whether it is mpls/vxlan, resulting in either permitting or denying the
route.. So an mpls evpn route may get filtered out incorrectly.
Eg: "route-map RM1 permit 10 ; match evpn vni 20" or
"route-map RM2 deny 20 ; match vni 20"
With the introduction of the 3rd state, we can abort this rule check safely.
How? The rules api can now return RMAP_NOOP (or another enum) to indicate
that it encountered an invalid check, and needs to abort just that rule,
but continue with other rules.
Question: Do we repurpose an existing enum RMAP_OKAY or RMAP_ERROR
as the 3rd state (or create a new enum like RMAP_NOOP)?
RMAP_OKAY and RMAP_ERROR are used to return the result of set cmd.
We chose to go with RMAP_NOOP (but open to ideas),
as a way to bypass the rmap filter
As a result we have a 3rd state:
State3: Received RMAP_NOOP
Then, proceed to other route-map, otherwise return RMAP_PERMITMATCH by default.
Signed-off-by:Lakshman Krishnamoorthy <lkrishnamoor@vmware.com>
The `struct rib_dest_t` was being used to store the linked
list of rnh's associated with the node. This was taking up
a bunch of memory. Replace with new data structure supplied
by David and see the memory reductions associated with 1 million
routes in the zebra rib:
Old:
Memory statistics for zebra:
System allocator statistics:
Total heap allocated: 675 MiB
Holding block headers: 0 bytes
Used small blocks: 0 bytes
Used ordinary blocks: 567 MiB
Free small blocks: 39 MiB
Free ordinary blocks: 69 MiB
Ordinary blocks: 0
Small blocks: 0
Holding blocks: 0
New:
Memory statistics for zebra:
System allocator statistics:
Total heap allocated: 574 MiB
Holding block headers: 0 bytes
Used small blocks: 0 bytes
Used ordinary blocks: 536 MiB
Free small blocks: 33 MiB
Free ordinary blocks: 4600 KiB
Ordinary blocks: 0
Small blocks: 0
Holding blocks: 0
`struct rnh` was moved to rib.h because of the tangled web
of structure dependancies. This data structure is used
in numerous places so it should be ok for the moment.
Future work might be needed to do a better job of splitting
up data structures and function definitions.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The `struct rib_dest_t` was being used to store the linked
list of rnh's associated with the node. This was taking up
a bunch of memory. Replace with new data structure supplied
by David and see the memory reductions associated with 1 million
routes in the zebra rib:
Old:
Memory statistics for zebra:
System allocator statistics:
Total heap allocated: 675 MiB
Holding block headers: 0 bytes
Used small blocks: 0 bytes
Used ordinary blocks: 567 MiB
Free small blocks: 39 MiB
Free ordinary blocks: 69 MiB
Ordinary blocks: 0
Small blocks: 0
Holding blocks: 0
New:
Memory statistics for zebra:
System allocator statistics:
Total heap allocated: 574 MiB
Holding block headers: 0 bytes
Used small blocks: 0 bytes
Used ordinary blocks: 536 MiB
Free small blocks: 33 MiB
Free ordinary blocks: 4600 KiB
Ordinary blocks: 0
Small blocks: 0
Holding blocks: 0
`struct rnh` was moved to rib.h because of the tangled web
of structure dependancies. This data structure is used
in numerous places so it should be ok for the moment.
Future work might be needed to do a better job of splitting
up data structures and function definitions.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
