Add a test case to ensure that Kernel routes are not lost
when there are multiple overlapping connected routes.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
This bug should only really affect kernel routes. To reproduce:
a) Have multiple connected routes that point to the same prefix
swp8 up default 169.254.0.250/30
swp9 up default 169.254.0.250/30
b) Have a kernel route that uses one of those connected routes
7.6.2.8 via 169.254.0.249 dev swp8 proto static
(But have it choose a non-selected connected nexthop)
c) Introduce an event that causes the rib table to be reprocessed,
say a unrelated interface going up / down
This causes the route to be lost with this message:
2022/03/28 21:21:53 ZEBRA: [YXCJP-0WZWV] netlink_nexthop_msg_encode: ID (3454): 169.254.0.249, via swp8(1383) vrf default(0)
2022/03/28 21:21:53 ZEBRA: [YF2E6-J60JH] nexthop_active: 169.254.0.249, via swp8 given ifindex does not match nexthops ifindex found found: directly connected, swp9
Effectively the nexthop that zebra is choosing would not be the one
that the kernel route has choosen and FRR removes the route:
022/03/28 21:21:53 ZEBRA: [NM15X-X83N9] rib_process: (0:254):7.6.2.8/32: rn 0x56042e632e90, removing re 0x56042e6316e0
2022/03/28 21:21:53 ZEBRA: [Y53JX-CBC5H] rib_unlink: (0:254):7.6.2.8/32: rn 0x56042e632e90, re 0x56042e6316e0
2022/03/28 21:21:53 ZEBRA: [KT8QQ-45WQ0] rib_gc_dest: (0:?):7.6.2.8/32: removing dest from table
What is happening?
Zebra is not looking at all connected routes and if any of them
would have the appropriate ifindex and just blindly rejecting
the route.
So when nexthop resolution happens and it matches a connected
route and the dest->selected nexthop ifindex does not match, let's sort
through the rest of them and see if any of them match and if so
let's keep the route.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
I should've removed this in #10960. It's a hazard in terms of
forgetting to adjust PRs/other changes that might accidentally still
reference the field.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
vtysh_client_execute() expects just a string without a newline; the
newline is passed through and ends up in logging output where newlines
are not quite wanted.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Just simple helpers to get a scope value, never-forward, and is-SSM for
a given address.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Two cosmetic change -
1) Remove unnecessary local variable - `es_vtep` used in one condition.
2) Remove unused variable - `es_cnt`. `proc_cnt` has already taken `es`
into account.
Signed-off-by: anlan_cs <vic.lan@pica8.com>
Start a separate timer which does the sync with the RPKI manager until
returns the synced status.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
Since additional information such as block_bits_length is needed to
generate SIDs properly, the type of elements in srv6_locator_chunks
list is extended from "struct prefix_ipv6 *" to
"struct srv6_locator_chunk *". Even in terms of variable name,
"struct srv6_locator_chunk *" is appropriate.
Signed-off-by: Nobuhiro MIKI <nmiki@yahoo-corp.jp>
Adding the config mode command
ipv6 mld watermark-warn <1-65535>
This command can be use to warn the user
when more than the desired limit of groups gets configured.
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
Adding the Interface level config command
ipv6 mld last-member-query-interval (1-65535)
This command can be use to tune the response time for group specific queries.
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
Adding the Interface level config command
ipv6 mld last-member-query-count (1-255)
This command can be use to tune the number of Multicast-Address- Specific Queries
sent before the router assumes there are no remaining listeners for an address on a link.
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
Adding the Interface level config command
ipv6 mld query-max-response-time <1-65535>
This command can be use to tune the max response time for general queries.
The number of seconds represented by the [Query Response Interval] must be less than the [Query Interval]
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
The entire `case NEXTHOP_TYPE_IPV6_IFINDEX:` block here was a bit of a
tripwire to stumble over, since there was no indication at all that this
concerns RFC5549 nexthop handling. So it got mis-adapted for PIM IPv6
support.
Clarify this a whole bunch that this is for v4-over-v6 nexthop mangling,
and nothing else.
This should really also use neighbor's secondary address lists for the
lookup, but that is probably going to break compatibility with other
boxes that don't include v6 addrs in v4 hellos and needs further
machinery to do properly, so for now just leave a breadcrumb.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
