Keep the list of remote-vteps/nexthops in
rmac db.
Problem:
In CLAG deployment there might be a situation
where CLAG secondary sends individual ip as nexthop
along with anycast mac as RMAC. This combination
is updated in zebra's rmac cache.
Upon recovery at clag secondary sends withdrawal
of the incorrect rmac and nexthop mapping.
The RMAC entry mapping to nh is not cleaned up properly
in the zebra rmac cache.
Fix:
Zebra rmac db needs to maintain a list of nexthops.
When a bgp withdrawal for rmac to nexthop mapping
is received, remove the old nexthop from the rmac's nh
list and if the host reference still remains for
the RMAC,fall back to the nexthop one remaining in
the list.
At most you expect two nexthops mapped to RMAC
(in clag deployment).
Ticket: 2798406
Reviewed By:
Testing Done:
CLAG primary and secondary have advertise-pip enabled
advertise type-5 route (default route) with
individual IP as nh and individual svi mac as rmac.
- disable advertise pip on both clag devices, this
results in advertisement of routes with anycast ip as nh
and anycast mac as rmac.
- disable peerlink on clag primary, this triggers
clag secondary to (transitory) send bgp update with
individual ip as nh and anycast mac as rmac.
- At the remote vtep:
Check the zebra's rmac cache/nh mapping correctly
and points to anycast rmac and anycast ip as nh of the
clag system.
Signed-off-by: Chirag Shah <chirag@nvidia.com>
If you enter:
router bgp 325
bgp graceful-restart
bgp graceful-restart
!
The second command entered will fail. This is not
something that should be failing as that it's a no-op.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
IPv4 uses "struct ip" and IPv6 uses "struct ip6_hdr" as
headers. Get the src and dst in pim_sgaddr.
Added api pim_sgaddr_from_iphdr to do so.
Signed-off-by: Mobashshera Rasool <mrasool@vmwaer.com>
Cleanup the logs in the netlink code for setting
protodown on/off to be more useful to a user parsing them
after an issue.
Signed-off-by: Stephen Worley <sworley@nvidia.com>
Use the SET/UNSET/CHECK/COND macros for flag bifields
where appropriate throught the protodown code base.
Signed-off-by: Stephen Worley <sworley@nvidia.com>
Ensure we include the old reason when we are updating the reason
code for a evpn-mh bond member. Now that this is a common API
it could include things external to EVPN in this reason code
bitfield (ex: vrrp).
Signed-off-by: Stephen Worley <sworley@nvidia.com>
Make the netlink protodown static function for checking
if the only bit set for protodown reason is FRR's more
easily readable to someone not familiar with the code.
Signed-off-by: Stephen Worley <sworley@nvidia.com>
Simplify the code for printing the reason codes via
show command. Just remove the trailing comma last
before printing.
Signed-off-by: Stephen Worley <sworley@nvidia.com>
Cleanup the logs in the api for setting protodown on/off
that zapi and others use. Make them more useful to a user parsing
them after an issue.
Signed-off-by: Stephen Worley <sworley@nvidia.com>
Avoid initialization in dplane_ctx_intf_init() so
the compiler can warn us about using unintialized data.
Signed-off-by: Stephen Worley <sworley@nvidia.com>
When we are processing a bond member's protodown we get from
the dataplane, check to make sure we haven't already queued
up a set. If we have, it's likely this is just a notification
we get from the kernel after we set protodown and before we have
processed the result in our dplane pthread.
This change is needed now that we set protodown via the dplane
pthread.
Signed-off-by: Stephen Worley <sworley@nvidia.com>
When setting the protodown reason use the update api
where we can directly update the entire reason bitfield
since we have to set more than one.
Signed-off-by: Stephen Worley <sworley@nvidia.com>
Extern the api for setting the protodown reason code
bitfield directly. Some places may want to completely update the
bitfield with more than one reason at a time.
Signed-off-by: Stephen Worley <sworley@nvidia.com>
Only clear protodown reason on shutdown/sweep, retain protodown
state.
This is to retain traditional and expected behavior with daemons
like vrrpd setting protodown. They expet it to be set on shutdown
and retained on bring up to prevent traffic from being dropped.
We must cleanup our reason code though to prevent us from blocking
others.
Signed-off-by: Stephen Worley <sworley@nvidia.com>
Add functionality to clear any reason code set on shutdown
of zebra when we are freeing the interface, in case a bad
client didn't tell us to clear it when the shutdown.
Also, in case of a crash or failure to do the above, clear reason
on startup if it is set.
Signed-off-by: Stephen Worley <sworley@nvidia.com>
Add enums for set/unset of prodown state to handle the mainthread
knowing an update is already queued without actually marking it
as complete.
This is to make the logic confirm a bit more with other parts of the code
where we queue dplane updates and not update our internal structs until
success callback is received.
Signed-off-by: Stephen Worley <sworley@nvidia.com>
Add command for use to set protodown via frr.conf in
the case our default conflicts with another application
they are using.
Signed-off-by: Stephen Worley <sworley@nvidia.com>
Add support for setting protodown via sharpd. This is just useful
for testing. We can make use of this in topotests.
Signed-off-by: Stephen Worley <sworley@nvidia.com>
Add support for setting the protodown reason code.
829eb208e8
These patches handle all our netlink code for setting the reason.
For protodown reason we only set `frr` as the reason externally
but internally we have more descriptive reasoning available via
`show interface IFNAME`. The kernel only provides a bitwidth of 32
that all userspace programs have to share so this makes the most sense.
Since this is new functionality, it needs to be added to the dplane
pthread instead. So these patches, also move the protodown setting we
were doing before into the dplane pthread. For this, we abstract it a
bit more to make it a general interface LINK update dplane API. This
API can be expanded to support gernal link creation/updating when/if
someone ever adds that code.
We also move a more common entrypoint for evpn-mh and from zapi clients
like vrrpd. They both call common code now to set our internal flags
for protodown and protodown reason.
Also add debugging code for dumping netlink packets with
protodown/protodown_reason.
Signed-off-by: Stephen Worley <sworley@nvidia.com>
Contraints of host routes are too strict in current code:
Host routes with same destination address and nexthop address are forbidden
even when cross VRFs.
Currently host routes with different destination and nexthop address can cross
VRFs, it is ok. But host routes with same addresses are forbidden to cross VRFs,
it is wrong.
Since different VRFs can have the same addresses, leak specific host route with
the same nexthop address ( it means destination address is same to nexthop
address ) to other VRFs is a normal case.
This commit relaxes that contraints. Host routes with same destination address
and nexthop address are forbidden only when not cross VRFs.
Signed-off-by: anlan_cs <vic.lan@pica8.com>
When an interface goes down, it signals any related NHGs to
re-validate themselves. During zebra shutdown, ensure we remove
any NHGs we've installed.
Signed-off-by: Mark Stapp <mstapp@nvidia.com>
In `zebra_evpn_neigh_gw_macip_add()`, it sets `mac->flags` to "ZEBRA_MAC_DEF_GW"
for "advertise-default-gw" mode. But this set is redundant because this "mac"
is already set by `zebra_evpn_mac_gw_macip_add()`.
So remove this redundant assignment.
Signed-off-by: anlan_cs <vic.lan@pica8.com>
