bgp_damp_config, afi and safi are never used.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
This causes a crash using `clear ip bgp dampening <prefix>`.
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
Description:
clear ip bgp dampening was not triggering the route
calculation for the prefix, Due to this prefix are not install in
RIB(Zebra) and not adv to neighbor
Problem Description/Summary :
clear ip bgp dampening was not triggering the route
calculation for the prefix, Due to this prefix are not install in
RIB(Zebra) and not adv to neighbor
Fix: When clear ip bgp dampening, route are put for route-calculation as
that it is install in the Zebra and adv to neighbor.
Signed-off-by: sudhanshukumar22 <sudhanshu.kumar@broadcom.com>
Changes implement dampening profiles for peers and peer groups. This is
achieved by introducing the possibility to have multible existing
dampening configurations with their own sets of parameters and lists of
associated paths.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Signed-off-by: David Schweizer <dschweizer@opensourcerouting.org>
There is no support for option 8, as per RFC7854.
Add the 64 bit counter in the peer structure.
Add the missing per peer statistic.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
When a peer has no IPv6 global address to send as nexthop, it sends the
IPv6 link-local instead as global. "show bgp ipv6 json" displays the
same address in global and link-local scopes.
> "nexthops": [
> {
> "ip": "fe80::a495:38ff:fea6:6ea3",
> "afi": "ipv6",
> "scope": "global",
> "used": true
> },
> {
> "ip": "fe80::a495:38ff:fea6:6ea3",
> "afi": "ipv6",
> "scope": "link-local"
> }
> ]
However, "used" key is set on the global nexthop but not in link-local.
It is correct but it makes difficult to test JSON to expect the usage of
a link-local. The contrary is also correct.
Set "used" key on the link-local nexhop instead to facilitate the tests.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
The usage of the `bgp bestpath med missing-as-worst` command
was being accepted and applied during bestpath, but during output
of the routes affected by this it would not give any indication
that this was happening or what med value was being used.
Fixes: #15718
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Current changes deals with EVPN routes installation to zebra.
In evpn_route_select_install() we invoke evpn_zebra_install/uninstall
which sends zclient_send_message().
This is a continuation of code changes (similar to
ccfe452763) but to handle evpn part
of the code.
Ticket: #3390099
Signed-off-by: Rajasekar Raja <rajasekarr@nvidia.com>
Currently bgp_path_info's are stored in reverse order
received. Sort them by the best path ordering.
This will allow for optimizations in the future on
how multipath is done.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
This will allow a consistency of approach to adding/removing
pi's to from the workqueue for processing as well as properly
handling the dest->info pi list more appropriately.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Add a new flag BGP_PATH_UNSORTED to keep track
of sorted -vs- unsorted path_info's. Add some
ability to the system to understand when that
flag is set.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Add a debug function to allow developers to dump flags
associated with a bgp_path_info in a human readable format.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Currently BGP attempts to send route change information
to it's peers *before* the route is installed into zebra.
This creates a bug in suppress-fib-pending in the following
scenario:
a) bgp suppress-fib-pending and bgp has a route with
2 way ecmp.
b) bgp receives a route withdraw from peer 1. BGP
will send the route to zebra and mark the route as
FIB_INSTALL_PENDING.
c) bgp receives a route withdraw from peer 2. BGP
will see the route has the FIB_INSTALL_PENDING and
not send the withdrawal of the route to the peer.
bgp will then send the route deletion to zebra and
clean up the bgp_path_info's.
At this point BGP is stuck where it has not sent
a route withdrawal to downstream peers.
Let's modify the code in bgp_process_main_one to
send the route notification to zebra first before
attempting to announce the route. The route withdrawal
will remove the FIB_INSTALL_PENDING flag from the dest
and this will allow group_announce_route to believe
it can send the route withdrawal.
For the master branch this is ok because the recent
backpressure commits are in place and nothing is going
to change from an ordering perspective in that regards.
Ostensibly this fix is also for operators of Sonic and
will be backported to the 8.5 branch as well. This will
change the order of the send to peers to be after the
zebra installation but sonic users are using suppress-fib-pending
anyways so updates won't go out until rib ack has been
received anyways.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
BGP is now keeping a list of dests with the dest having a pointer
to the bgp_path_info that it will be working on.
1) When bgp receives a prefix, process it, add the bgp_dest of the
prefix into the new Fifo list if not present, update the flags (Ex:
earlier if the prefix was advertised and now it is a withdrawn),
increment the ref_count and DO NOT advertise the install/withdraw
to zebra yet.
2) Schedule an event to wake up to invoke the new function which will
walk the list one by one and installs/withdraws the routes into zebra.
a) if BUFFER_EMPTY, process the next item on the list
b) if BUFFER_PENDING, bail out and the callback in
zclient_flush_data() will invoke the same function when BUFFER_EMPTY
Changes
- rename old bgp_zebra_announce to bgp_zebra_announce_actual
- rename old bgp_zebra_withdrw to bgp_zebra_withdraw_actual
- Handle new fifo list cleanup in bgp_exit()
- New funcs: bgp_handle_route_announcements_to_zebra() and
bgp_zebra_route_install()
- Define a callback function to invoke
bgp_handle_route_announcements_to_zebra() when BUFFER_EMPTY in
zclient_flush_data()
The current change deals with bgp installing routes via
bgp_process_main_one()
Ticket: #3390099
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Signed-off-by: Rajasekar Raja <rajasekarr@nvidia.com>
Since installing/withdrawing routes into zebra is going to be changed
around to be dest based in a list,
- Retrieve the afi/safi to use based upon the dest's afi/safi
instead of passing it in.
- Prefix is known by the dest. Remove this arg as well
Ticket: #3390099
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Signed-off-by: Rajasekar Raja <rajasekarr@nvidia.com>
When running `show ip bgp` command, the 'route short status' and
'network' columns do not have white-space between them.
Old show:
Network Next Hop Metric LocPrf Weight Path
*>i1.1.1.1/32 10.1.12.111 0 100 0 i
New show:
Network Next Hop Metric LocPrf Weight Path
*>i 1.1.1.1/32 10.1.12.111 0 100 0 i
Added white-space to enhance readability between them.
Signed-off-by: Cassiano Campes <cassiano.campes@venkonetworks.com>
currently:
when as-path-loop-detection is set on a peer-group.
members of the peer-group are not using that functionnality.
analysis:
the as-path-loop-detection, is not using the peer's flags
related framework.
fix:
use the peer's flag framework for as-path-loop-detection.
Signed-off-by: Francois Dumontet <francois.dumontet@6wind.com>
Customer has this valgrind trace:
Direct leak of 2829120 byte(s) in 70728 object(s) allocated from:
0 in community_new ../bgpd/bgp_community.c:39
1 in community_uniq_sort ../bgpd/bgp_community.c:170
2 in route_set_community ../bgpd/bgp_routemap.c:2342
3 in route_map_apply_ext ../lib/routemap.c:2673
4 in subgroup_announce_check ../bgpd/bgp_route.c:2367
5 in subgroup_process_announce_selected ../bgpd/bgp_route.c:2914
6 in group_announce_route_walkcb ../bgpd/bgp_updgrp_adv.c:199
7 in hash_walk ../lib/hash.c:285
8 in update_group_af_walk ../bgpd/bgp_updgrp.c:2061
9 in group_announce_route ../bgpd/bgp_updgrp_adv.c:1059
10 in bgp_process_main_one ../bgpd/bgp_route.c:3221
11 in bgp_process_wq ../bgpd/bgp_route.c:3221
12 in work_queue_run ../lib/workqueue.c:282
The above leak detected by valgrind was from a screenshot so I copied it
by hand. Any mistakes in line numbers are purely from my transcription.
Additionally this is against a slightly modified 8.5.1 version of FRR.
Code inspection of 8.5.1 -vs- latest master shows the same problem
exists. Code should be able to be followed from there to here.
What is happening:
There is a route-map being applied that modifes the outgoing community
to a peer. This is saved in the attr copy created in
subgroup_process_announce_selected. This community pointer is not
interned. So the community->refcount is still 0. Normally when
a prefix is announced, the attr and the prefix are placed on a
adjency out structure where the attribute is interned. This will
cause the community to be saved in the community hash list as well.
In a non-normal operation when the decision to send is aborted after
the route-map application, the attribute is just dropped and the
pointer to the community is just dropped too, leading to situations
where the memory is leaked. The usage of bgp suppress-fib would
would be a case where the community is caused to be leaked.
Additionally the previous commit where an unsuppress-map is used
to modify the outgoing attribute but since unsuppress-map was
not considered part of outgoing policy the attribute would be dropped as
well. This pointer drop also extends to any dynamically allocated
memory saved by the attribute pointer that was not interned yet as well.
So let's modify the return case where the decision is made to
not send the prefix to the peer to always just flush the attribute
to ensure memory is not leaked.
Fixes: #15459
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
A route and its nexthop might belong to different VRFs. Therefore, we need
both the bgp and bgp_nexthop pointers.
Fixes: 8d51fafdcb ("bgpd: Drop bgp_static_update_safi() function")
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
This for loop has no chance of removing entries so there is no
need to do a bit of complicated code to handle the case where
an entry can be removed.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Move mp_nexthop_prefer_global boolean attribute to nh_flags. It does
not currently save memory because of the packing.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Locally leaked routes remain active after the nexthop VRF interface goes
down.
Update route leaking when the loopback or a VRF interface state change is
received from zebra.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
When a BGP flowspec peering stops, the BGP RIB entries for IPv6
flowspec entries are removed, but not the ZEBRA RIB IPv6 entries.
Actually, when calling bgp_zebra_withdraw() function call, only
the AFI_IP parameter is passed to the bgp_pbr_update_entry() function
in charge of the Flowspec add/delete in zebra. Fix this by passing
the AFI parameter to the bgp_zebra_withdraw() function.
Note that using topotest does not show up the problem as the
flowspec driver code is not present and was refused. Without that,
routes are not installed, and can not be uninstalled.
Fixes: 529efa2346 ("bgpd: allow flowspec entries to be announced to zebra")
Link: https://github.com/FRRouting/frr/pull/2025
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
By default, iBGP and eBGP-OAD peers exchange RPKI extended community by default.
Add a command to disable sending RPKI extended community if needed.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
Structure size of bgp_path_info_extra when compiled
with vnc is 184 bytes. Reduce this size to 72 bytes
when compiled w/ vnc but not necessarily turned
on vnc.
With 2 full bgp feeds this saves aproximately 100mb
when compiling with vnc and not using vnc.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Without this change when we change the route-map, we never reinstall the route
if the route-map has changed.
We checked only some attributes like aspath, communities, large-communities,
extended-communities, but ignoring the rest of attributes.
With this change, let's check if the route-map has changed.
bgp_route_map_process_update() is triggered on route-map change, and we set
`changed` to true, which treats aggregated route as not the same as it was before.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
Comparing pointers is not the appropriate way to know
if the label values are the same or not. Perform a
memcmp call instead is better.
Fixes: 8ba7105057 ("bgpd: fix valgrind flagged errors")
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
https://datatracker.ietf.org/doc/html/draft-uttaro-idr-bgp-oad#section-3.13
Extended communities which are non-transitive across an AS boundary MAY be
advertised over an EBGP-OAD session if allowed by explicit policy configuration.
If allowed, all the members of the OAD SHOULD be configured to use the same
criteria.
For example, the Origin Validation State Extended Community, defined as
non-transitive in [RFC8097], can be advertised to peers in the same OAD.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
If at least one of the candidate routes was received via EBGP, remove from
consideration all routes that were received via EBGP-OAD and IBGP.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
When bgp update is received for EVPN prefix
where for an existing path's nexthop becomes unreachable,
the path is marked as not VALID but the routes
were not unimported from tenant vrfs, which lead to
stale unicast route(s) and nexthop(s).
In Multipath scenario only a specific path may have marked as
not VALID, then specific path info for the EVPN prefix required to be
unimported from tenant vrf.
Ticket: #3671288
Signed-off-by: Chirag Shah <chirag@nvidia.com>
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The MTYPE_BGP memory type was being over used as
both the handler for the bgp instance itself as
well as memory associated with name strings.
Let's separate out the two.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
moved loc-rib uptime field "bgp_rib_uptime" to struct bgp_path_info_extra for memory concerns
moved logic into bgp_route_update's callback bmp_route_update
written timestamp in per peer header
Signed-off-by: Maxence Younsi <mx.yns@outlook.fr>
TODOs that are done/un-necessary now deleted
refactored bmp_route_update to use a modified bmp_process_one function call instead of duplicating similar code
Signed-off-by: Maxence Younsi <mx.yns@outlook.fr>
added time_t field to bgp_path_info
set value before bgp dp hook is called
value not set in the msg yet, testing and double checking is needed before
Signed-off-by: Maxence Younsi <mx.yns@outlook.fr>
set peer type flag to 3 for loc rib monitoring
leave to 0 in other cases like before, even though RFC7854 tells us to set it to 0 1 or 2 depending on the case global/rd/local instance
Signed-off-by: Maxence Younsi <mx.yns@outlook.fr>
At each EBGP boundary, BGP path attributes are modified as per [RFC4271], which includes stripping any IBGP-only attributes.
Some networks span more than one autonomous system and require more flexibility in the propagation of path attributes. It is worth noting that these multi-AS networks have a common or single administrative entity. These networks are said to belong to One Administrative Domain (OAD). It is desirable to carry IBGP-only attributes across EBGP peerings when the peers belong to an OAD.
This document defines a new EBGP peering type known as EBGP-OAD, which is used between two EBGP peers that belong to an OAD. This document also defines rules for route announcement and processing for EBGP-OAD peers.
https://datatracker.ietf.org/doc/html/draft-uttaro-idr-bgp-oad
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
Avoid having something like this in outputs:
Before:
```
munet> r1 shi vtysh -c 'show bgp dampening damp'
BGP table version is 10, local router ID is 10.10.10.1, vrf id 0
Default local pref 100, local AS 65001
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
RPKI validation codes: V valid, I invalid, N Not found
Network From Reuse Path
*d 2001:db8:1::1/128
2001:db8::2 (null) 65002 ?
*d 2001:db8:2::1/128
2001:db8::2 (null) 65002 ?
*d 2001:db8:3::1/128
2001:db8::2 (null) 65002 ?
*d 2001:db8:4::1/128
2001:db8::2 (null) 65002 ?
*d 2001:db8:5::1/128
2001:db8::2 (null) 65002 ?
Displayed 5 routes and 5 total paths
munet> r1 shi vtysh -c 'show bgp dampening flap'
BGP table version is 10, local router ID is 10.10.10.1, vrf id 0
Default local pref 100, local AS 65001
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
RPKI validation codes: V valid, I invalid, N Not found
Network From Flaps Duration Reuse Path
*d 2001:db8:1::1/128
2001:db8::2 2 00:03:10 (null) 65002 ?
*d 2001:db8:2::1/128
2001:db8::2 2 00:03:10 (null) 65002 ?
*d 2001:db8:3::1/128
2001:db8::2 2 00:03:10 (null) 65002 ?
*d 2001:db8:4::1/128
2001:db8::2 2 00:03:10 (null) 65002 ?
*d 2001:db8:5::1/128
2001:db8::2 2 00:03:10 (null) 65002 ?
Displayed 5 routes and 5 total paths
```
After:
```
munet> r1 shi vtysh -c 'show bgp dampening damp '
BGP table version is 10, local router ID is 10.10.10.1, vrf id 0
Default local pref 100, local AS 65001
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
RPKI validation codes: V valid, I invalid, N Not found
Network From Reuse Path
*d 2001:db8:1::1/128
2001:db8::2 00:00:00 65002 ?
*d 2001:db8:2::1/128
2001:db8::2 00:00:00 65002 ?
*d 2001:db8:3::1/128
2001:db8::2 00:00:00 65002 ?
*d 2001:db8:4::1/128
2001:db8::2 00:00:00 65002 ?
*d 2001:db8:5::1/128
2001:db8::2 00:00:00 65002 ?
Displayed 5 routes and 5 total paths
munet> r1 shi vtysh -c 'show bgp dampening flap'
BGP table version is 10, local router ID is 10.10.10.1, vrf id 0
Default local pref 100, local AS 65001
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
RPKI validation codes: V valid, I invalid, N Not found
Network From Flaps Duration Reuse Path
*d 2001:db8:1::1/128
2001:db8::2 2 00:00:15 00:00:00 65002 ?
*d 2001:db8:2::1/128
2001:db8::2 2 00:00:15 00:00:00 65002 ?
*d 2001:db8:3::1/128
2001:db8::2 2 00:00:15 00:00:00 65002 ?
*d 2001:db8:4::1/128
2001:db8::2 2 00:00:15 00:00:00 65002 ?
*d 2001:db8:5::1/128
2001:db8::2 2 00:00:15 00:00:00 65002 ?
Displayed 5 routes and 5 total paths
```
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
Add the ability to store a raw copy of the incoming BGP Link-State
attributes and to redistribute them as is to other routes.
New types of data BGP_ATTR_LS and BGP_ATTR_LS_DATA are defined.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
Add the "show bgp link-state link-state" following commands:
> r3# show bgp link-state link-state ?
> <cr>
> all Display the entries for all address families
> detail-routes Display detailed version of all routes
> json JavaScript Object Notation
> neighbors Detailed information on TCP and BGP neighbor connections
> regexp Display routes matching the AS path regular expression
> summary Summary of BGP neighbor status
> version Display prefixes with matching version numbers
> wide Increase table width for longer prefixes
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
BGP link-state prefixes are displayed in the form of NLRI-TYPE /
Prefix-Length.
> r2# show bgp all
>
> For address family: Link State
> BGP table version is 8, local router ID is 192.0.2.2, vrf id 0
> Default local pref 100, local AS 65002
> Network Next Hop Metric LocPrf Weight Path
> *> Link/153 0 65001 i
> *> IPv6-Prefix/77 0 65001 i
> *> IPv4-Prefix/57 0 65001 i
> *> Node/49 0 65001 i
> *> Node/45 0 65001 i
Add a lib prefix display hook in bgpd to display properly all the details.
> r2# show bgp all
>
> For address family: Link State
> BGP table version is 8, local router ID is 192.0.2.2, vrf id 0
> Default local pref 100, local AS 65002
> Network Next Hop Metric LocPrf Weight Path
> *> Link OSPFv3 ID:0xffffffffffffffff {Local {AS:4294967295 ID:4294967295 Area:4294967295 Rtr:10.10.10.11:2.2.2.2} Remote {AS:4294967295 ID:4294967295 Area:4294967295 Rtr:10.10.10.10:1.1.1.1} IPv4:10.1.0.1 Neigh-IPv4:10.1.0.2 IPv6:2001::1 Neigh-IPv6:2001::2 MT:0,2}/153
> 0 65001 i
> *> IPv6-Prefix OSPFv3 ID:0x20 {Local {AS:65001 ID:0 Area:0 Rtr:10.10.10.10} MT:2 OSPF-Route-Type:1 IPv6:12:12::12:12/128}/77
> 0 65001 i
> *> IPv4-Prefix OSPFv2 ID:0x20 {Local {AS:65001 ID:0 Area:0 Rtr:10.10.10.10:1.1.1.1} IPv4:89.10.11.0/24}/57
> 0 65001 i
> *> Node OSPFv2 ID:0x20 {Local {AS:65001 ID:0 Area:0 Rtr:10.10.10.10:1.1.1.1}}/49
> 0 65001 i
> *> Node OSPFv2 ID:0x20 {Local {AS:65001 ID:0 Area:0 Rtr:10.10.10.10}}/45
> 0 65001 i
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
When displaying the link-state prefixes with "show bgp link-state
link-state" command, the following output headers are not needed:
> Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
> i internal, r RIB-failure, S Stale, R Removed
> Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
> Origin codes: i - IGP, e - EGP, ? - incomplete
> RPKI validation codes: V valid, I invalid, N Not found
Do not display these headers for link-state SAFI.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
BGP Link-State prefixes are special prefixes that contains a lot of
data.
Extend the length of the prefix string buffer in order to display
properly this type of prefixes with the next commits.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Add the ability to send link-state prefixes that are in the BGP table.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
If we modify as-path with route-map and prepend with private ASNs, then we
advertise a new as-path without stripping private ASNs. Let's fix this, and
remove private ASNs despite if they were sent by the origin or prepended locally.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
The pdest pointer is locked by the bgp_node_get so
unlocking it should be fine and it should still exist.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
dest could be freed by the first unlock, but should
not be due to our locking structure. Ensure coverity
understands this.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Unsetting a flag after the dest has been possibly been
freed is not a good thing to do. Ensure that this
is not possible.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
This is incase it has been freed ( it wont due to locking )
and then we need to ensure that we can continue to use
the pointer.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The bgp_cleanup_routes function holds the lock for dest
while walking it. Ensure that coverity understands this
proposition.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
But never really does due to locking, but since it can
we need to treat it like it does and ensure that FRR
is not making a mistake, by using memory after it
has been freed.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
dest will not be freed due to lock but coverity does not know
that. Give it a hint. This change includes modifying bgp_dest_unlock_node
to return the dest pointer so that we can determine if we should
continue working on dest or not with an assert. Since this
is lock based we should be ok.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Modify bgp_fsm_change_status to be connection oriented and
also make the BGP_TIMER_ON and BGP_EVENT_ADD macros connection
oriented as well. Attempt to make peer_xfer_conn a bit more
understandable because, frankly it was/is confusing.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Currently evpn passes into bgp_path_info_cmp the pfx_buf
uninitialized. The bgp_path_info_cmp functionality actually
expects this value to be initialized. Additionally the
evpn section of bgp_path_info_comp was resetting the
new_buf and exist_buf values that were already being
set above to the same values if !debug was on( which
precluded it ever from happening )
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The command "show bgp all rpki notfound" includes not only RPKI
notfound routes but also RPKI valid and invalid routes in its results.
Fix the code to display only RPKI notfound routes.
Old output:
```
frr# show bgp all rpki notfound
For address family: IPv4 Unicast
BGP table version is 0, local router ID is 10.0.0.1, vrf id 0
Default local pref 100, local AS 64512
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
RPKI validation codes: V valid, I invalid, N Not found
Network Next Hop Metric LocPrf Weight Path
N x.x.x.0/18 a.a.a.a 100 0 64513 i
V y.y.y.0/19 a.a.a.a 200 0 64513 i
I z.z.z.0/16 a.a.a.a 10 0 64513 i
Displayed 3 routes and 3 total paths
```
New output:
```
frr# show bgp all rpki notfound
For address family: IPv4 Unicast
BGP table version is 0, local router ID is 10.0.0.1, vrf id 0
Default local pref 100, local AS 64512
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
RPKI validation codes: V valid, I invalid, N Not found
Network Next Hop Metric LocPrf Weight Path
N x.x.x.0/18 a.a.a.a 100 0 64513 i
Displayed 1 routes and 3 total paths
```
Signed-off-by: Ryo Nakano <ryo.z.nakano@gmail.com>
Shouldn't validate the label after 'decode_label'. If we validate
the label after 'decode_label', even the 'MPLS_INVALID_LABEL' will
be valid then.
Signed-off-by: Valerian_He <1826906282@qq.com>
This is based on @donaldsharp's work
The current code base is the struct bgp_node data structure.
The problem with this is that it creates a bunch of
extra data per route_node.
The table structure generates ‘holder’ nodes
that are never going to receive bgp routes,
and now the memory of those nodes is allocated
as if they are a full bgp_node.
After splitting up the bgp_node into bgp_dest and route_node,
the memory of ‘holder’ node which does not have any bgp data
will be allocated as the route_node, not the bgp_node,
and the memory usage is reduced.
The memory usage of BGP node will be reduced from 200B to 96B.
The total memory usage optimization of this part is ~16.00%.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Signed-off-by: Yuqing Zhao <xiaopanghu99@163.com>
The status and ostatus are a function of the `struct peer_connection`
move it into that data structure.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Even if some of the attributes in bgp_path_info_extra are
not used, their memory is still allocated every time. It
cause a waste of memory.
This commit code deletes all unnecessary attributes and
changes the optional attributes to pointer storage. Memory
will only be allocated when they are actually used. After
optimization, extra info related memory is reduced by about
half(~400B -> ~200B).
Signed-off-by: Valerian_He <1826906282@qq.com>
Include an event ptr-to-ptr in the event_execute() api
call, like the various schedule api calls. This allows the
execute() api to cancel an existing scheduled task if that
task is being executed inline.
Signed-off-by: Mark Stapp <mjs@labn.net>
Currently, json output of show BGP commands are no pretty format.
This is an extremely expensive operation for huge scale (lots of
routes with lots of paths).
BGP json non-pretty commands support added:
```
show bgp neighbors <nbr-id> advertised-routes json
show bgp neighbors <nbr-id> received-routes json
show bgp neighbors <nbr-id> advertised-routes detail json
show bgp neighbors <nbr-id> received-routes detail json
```
Ticket:#3513256
Issue:3513256
Testing: UT done
Signed-off-by: Sindhu Parvathi Gopinathan's <sgopinathan@nvidia.com>
When switching `router bgp`, `no router bgp` and doing redistributions, we should
ignore this action, otherwise memory leak happens:
```
Indirect leak of 400 byte(s) in 2 object(s) allocated from:
0 0x7f81b36b3a06 in __interceptor_calloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cc:153
1 0x7f81b327bd2e in qcalloc lib/memory.c:105
2 0x55f301d28628 in bgp_node_create bgpd/bgp_table.c:92
3 0x7f81b3309d0b in route_node_new lib/table.c:52
4 0x7f81b3309d0b in route_node_set lib/table.c:61
5 0x7f81b330be0a in route_node_get lib/table.c:319
6 0x55f301ce89df in bgp_redistribute_add bgpd/bgp_route.c:8907
7 0x55f301dac182 in zebra_read_route bgpd/bgp_zebra.c:593
8 0x7f81b334dcd7 in zclient_read lib/zclient.c:4179
9 0x7f81b331d702 in event_call lib/event.c:1995
10 0x7f81b325d597 in frr_run lib/libfrr.c:1213
11 0x55f301b94b12 in main bgpd/bgp_main.c:505
12 0x7f81b2b57082 in __libc_start_main ../csu/libc-start.c:308
```
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
Imagine the following scenario:
when a neighbor has an inbound policy set to modify the next hop, but no outbound route-map is configured.
In this case, if(!post_attr && (ROUTE_MAP_OUT_NAME(filter) || bgp_path_suppressed(pi))) returns false, causing rmap_in_change_flag to not be correctly cleared, and mistakenly identified as rmap_out_change_flag, leading to the failure of the subsequent neighbor-nexthop-self command.
Signed-off-by: Jack.zhang <hanyu.zly@alibaba-inc.com>
'{}' extra output may present JSON output from bgp_show_table_rd() when
no prefix are seen.
> {
> "vrfId": 0,
> "vrfName": "default",
> "tableVersion": 0,
> "routerId": "1.1.1.1",
> "defaultLocPrf": 100,
> "localAS": 65500,
> "routes": { "routeDistinguishers" : { "444:1" : { } } } }
> {}
Do not output '{}' when bgp_show_table() returns a valid JSON.
Tested without rd in config, bgp_show_table() returns nothing and the
JSON output is only '{}'
Fixes: 0224b3296c ("bgpd: Print empty JSON `{}` if no entries under `show bgp ipv4 vpn json`")
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
