These updates act as triggers to pimd to -
1. join the MDT for rxing VxLAN encapsulated BUM traffic
2. register the local-vtep-ip as a source for the MDT
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
An SG entry is added (if one doesn't already exist) when a l2-VNI is
associated with a mcast-grp and local-vtep-ip.
And viceversa; when the last l2-vni using a MDT is removed the SG
entry is deleted.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Based code for adding (S, G) entries. These entries are created when
a mcast-group and local-VTEP-IP is associated with and L2 VNI.
The parent (*, G) entries are created implicitly on the (S, G) addition
and play the role of termination entries.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Each multicast tunnel is associated with a -
1. Tunnel origination mroute that is used for forwarding the
VxLAN encapsulated flow -
S - local VTEP-IP
G - BUM mcast-group
2. And a tunnel termination entry -
S - * (any remote VTEP)
G - BUM mcast-group
Multiple L2 VNIs can share the same BUM mcast group (and local-VTEP-IP).
Zebra maintains an mcast (SG) hash table to pass this info to pimd for
subsequent MDT setup.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Remote VTEPs advertise the flood mode via IMET and the ingress VTEP
needs to perform head-end-replication of BUM packets to it only if the
PMSI tunnel type is set to ingress-replication. If a type-3 route is not
rxed or rxed with a mode other than ingress-replication we can skip
installation of the flood fdb entry for that L2-VNI. In that case the
remote VTEP is either not interested in BUM traffic or is using a
"static-config" based replication mode like PIM.
Sample output with HER -
=======================
root@TORS1:~# vtysh -c "show evpn vni 1000" |grep "Remote\|flood"
Remote VTEPs for this VNI:
27.0.0.8 flood: HER
root@TORS1:~#
Sample output with PIM-SM -
=========================
root@TORS2:~# vtysh -c "show evpn vni 1000" |grep "Remote\|flood"
Remote VTEPs for this VNI:
27.0.0.7 flood: -
root@TORS2:~#
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
L3VNI configured in a specific VRF is allowed to unconfigure from any
VRF, including default (global) VRF. This results L3VNI delete notification
to BGP and subsequent type-5 route uninstall from the VRF the L3VNI belong to.
This also resulted in the inconsistent running configuration.
The deleted L3VNI still shows up in its original VRF. The VRF in which the
"no vni <x>" was executed doesn't display its own L3VNI.
Added a VRF check in zebra to prevent this.
Signed-off-by: Kishore Aramalla <karamalla@vmware.com>
It had no logical reason to be in the default VRF. This moves it to the
zebra_router, which is better suited to store global references.
Signed-off-by: Tuetuopay <tuetuopay@me.com>
Sponsored-by: Scaleway
A lot of checks relied on the VRF ID and the EVPN VRF ID to be the same.
This patch changes those checks to the EVPN_ENABLED macro, which checks
if the VRF is the EVPN one.
Signed-off-by: Tuetuopay <tuetuopay@me.com>
Sponsored-by: Scaleway
For a MAC-IP pair generally local/netlink msg for
MAC is received followed by Neigh. The MAC can be detected as duplicate
during this event.
When a neigh update is received, the neigh inherits DUP flag from its
MAC and along with that mark the neigh as INACTIVE.
Also, In the case of DUP detected neigh, do not update its state
to ACTIVE before determining to send notification to bgpd.
There is a time when Neigh update received prior to MAC update.
In that case neigh is marked as inactive since its MAC is
still in REMOTE state. Once the MAC update is received and
it is detected as DUPLICATE, the neigh would inherit DUP flag
but remained in inactive state.
By fixing the first case, the neigh remains in inactive once
detected as DUPLICATE in both scenarios.
The unfreeze action would mark all inherited neighs to ACTIVE,
and clears DUP flag then sends notification to bgpd (to send type-2).
Ticket:CM-24339
Reviewed By:CCR-8451
Testing Done:
Validated dup detection on both environment where neigh and mac
notification can come as either one first.
With the fix, the neigh was remained in "inactive" state
once detected as duplicate.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
This replaces manual checks of the flag with a wrapper macro to convey
the meaning "is evpn enabled on this vrf?"
Signed-off-by: Tuetuopay <tuetuopay@me.com>
Sponsored-by: Scaleway
Rename {bgp,zvrf}_def{ault} to {bgp,zvrf}_evpn where it makes sense,
i.e. when they contain the EVPN instance.
Signed-off-by: Tuetuopay <tuetuopay@me.com>
Sponsored-by: Scaleway
Since the EVPN VRF may not be the default one, compare received
messages' VRF agains the EVPN VRF and not the Default.
Signed-off-by: Tuetuopay <tuetuopay@me.com>
Sponsored-by: Scaleway
This uses the EPVN VRF to store L3VNIs hashes, and looks up L2VNIs in
this VRF as they are stored there.
Signed-off-by: Tuetuopay <tuetuopay@me.com>
Sponsored-by: Scaleway
This sends local VNIs and local MAC addresses to the BGP instance
responsible for EVPN rather than the default one.
Signed-off-by: Tuetuopay <tuetuopay@me.com>
Sponsored-by: Scaleway
If the EVPN VRF is not the default one (i.e. with advertise-all-vni),
this allows showing its information with `show bgp l2evpn evpn ...`
commands. They do not require adding `vrf VRFNAME` since we only
support a single EVPN VRF. The same is true for zebra-specific commands
(e.g. `show evpn ...`).
Configuration commands are not restricted to the default VRF but to
the EVPN one, that is to the one bearing `advertise-all-vni`.
Signed-off-by: Tuetuopay <tuetuopay@me.com>
Sponsored-by: Scaleway
The EVPN VRF is defined by bgpd, and is the one vrf where
`advertise-all-vni` is present.
Signed-off-by: Tuetuopay <tuetuopay@me.com>
Sponsored-by: Scaleway
Duplicate address detection and recovery was relying on the l2-vni backptr
in the neighbor entry which was simply not initialized resulting in
a NULL pointer access in a setup with dup-addressed VMs -
VM1:{IP1,M1} and VM2:{IP1,M2}
Call stack:
(gdb) bt 6
at lib/sigevent.c:249
nbr=nbr@entry=0x559347f901d0, vtep_ip=..., vtep_ip@entry=..., do_dad=do_dad@entry=true,
is_dup_detect=is_dup_detect@entry=0x7ffc7f6be59f, is_local=is_local@entry=true)
at ./lib/ipaddr.h:86
ip=0x7ffc7f6be6f0, ifp=0x559347f901d0, zvni=0x559347f86800) at zebra/zebra_vxlan.c:3152
(More stack frames follow...)
(gdb) p nbr->zvni
$8 = (zebra_vni_t *) 0x0 <<<<<<<<<<<<<<<<<<<<
(gdb)
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
When we get a neighbor entry in zebra we start processing it.
Let's add some additional debugs to the processing so that when
it bails out and we don't use the data, we know the reason.
This should help in debugging the problems from why bgp does
not appear to have data associated with a neighbor entry
in the kernel.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
In the case of EVPN symmetric routing, the tenant VRF is associated with
a VNI that is used for routing and commonly referred to as the L3 VNI or
VRF VNI. Corresponding to this VNI is a VLAN and its associated L3 (IP)
interface (SVI). Overlay next hops (i.e., next hops for routes in the
tenant VRF) are reachable over this interface.
https://tools.ietf.org/html/draft-ietf-bess-evpn-prefix-advertisement
section 4.4 provides additional description of the above constructs.
The implementation currently derives this L3 interface for EVPN tenant
routes using special code that looks at route flags. This patch
exchanges the L3 interface between zebra and bgpd as part of the L3-VNI
exchange in order to eliminate some this special code.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Commit: 6005fe55bc
Introduced a crash with zebra looking up either the
nbr structure or the mac structure. This is because
the zvni used is NULL and we eventually call a hash_lookup
call that would cause a NULL dereference. Partially
revert this commit to original behavior.
Problems found via clang Static Analyzer.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
In Asymmetric and symetric routing scenario in EVPN
where each VTEP pair having different set of addresses
for the SVIs.
This knob allows reachability (ping connectivity) of
SVI IPs and resolve ARP resoultion VTEPs across racks.
This knob should not be used when same SVI IPs configured
on VTEPs across racks or when advertise default gateway
is configured.
Ticket:CM-23782
Testing Done:
Bring up EVPN symmetric routing topology with different
SVI IPs on different VTEPs. Enable advertise svi ip
at each VTEP, remote VTEPs installs arp entry for
SVI IPs via EVPN type-2 route exchange.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
The master thread handler is really part of the zrouter structure.
So let's move it over to that. Eventually zserv.h will only be
used for zapi messages.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
In extended-mobility case ({IP1, MAC} binding),
when a MAC moves from local to remote, binding
changes to {IP2, MAC}, local neigh (IP1) marked
as inactive in frr.
The evpn draft recommends to probe the entry once
local binding changes from local to remote.
Once the probe is set for the local neigh entry,
kernel will attempt refresh the entry via sending
unicast address resolution message, if host does not
reply, it will mark FAILED state.
For FAILED entry, kernel triggers delete neigh
request, which result in frr to remove inactive entry.
In absence of probing and aging out entry,
if MAC moves back to local with {IP3, MAC},
frr will mark both IP1 and IP3 as active and sends
type-2 update for both.
The IP1 may not be active host and still frr advertises
the route.
Ticket:CM-22864
Testing Done:
Validate the MAC mobilty in extended mobility scenario,
where local inactive entry gets removed once MAC moves
to remote state.
Once probe is set to the local entry, kernel triggers
reachability of the neigh/arp entry, since MAC moved remote,
ARP request goes to remote VTEP where host is not residing,
thus local neigh entry goes to failed state.
Frr receives neighbor delete faster and removes the entry.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Neigh detected duplicate detected during local update,
upon receiving kernel neigh delete, set neigh inactive
flag so BGPd can install remote route entry if present.
Only if freeze action enabled, local duplicate detected
entry will not be present in BGPd thus marking neigh
inactive is safe. BGPd will simply attempt install
remote entry if present.
Ticket:CM-23438
Testing Done:
Validated MAC-IP pair, trigger mobility of between two
VTEPs, upon local freeze perform neigh delete which
triggers BGP to install remote type-2 route into kernel.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
A MACIP is detected as duplicate and after that
the host continue to move behind different VTEPs results
in local VTEP receiving remote mobility events.
In remote_macip_add, ensure to trigger dad if
MAC is marked as duplicate. In case of freeze
action enabled, is_dup_detect will be set to
avoids installing frozen MAC into kernel.
Ticket:CM-23649
Testing Done:
Configured detection action freeze with detection count
as 7 at DUT and >7 at remote VTEP,
trigger MAC-IP mobility between VTEPs.
once tdetection count reached, MAC detected as duplicate,
post detection move the host to remote. The local VTEP
receives remote macip add and entry is not installed into
kernel with fix.
root@VTEP1:~# net show evpn mac vni 1002 mac aa:aa:aa:aa:aa:aa
MAC: aa:aa:aa:aa:aa:aa
Remote VTEP: 27.0.0.16
Local Seq: 7 Remote Seq: 8
Duplicate, detected at Fri Jan 25 05:03:29 2019
Neighbors:
11.11.11.11 Inactive
Kernel entry still points to LOCAL
root@VTEP1:~# bridge fdb show | grep aa:aa:aa
aa:aa:aa:aa:aa:aa dev hostbond3 vlan 1002 master VxLanA-1
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
When a local neigh is added with a MAC that is remote or absent the
neigh is kept in zebra as local/in-active. But not propagated to bgpd.
Similarly when an inactive neigh is deleted the del-msg is not propagated
to bgpd.
Without this change bgp and zebra would fall out of sync as that
bgp would not know to rerun bestpath and for it to reinstall a
known remote path for the mac-ip in question. To fix this we
now propagate inactive neigh deletes to bgpd.
Ticket: CM-23018
Testing Done:
1. evpn-min
2. manually triggered the out-of-sync state and verified the fix
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
For neigh check duplicate flag as it can be inherited from
duplicate detected MAC (count could be 0).
Ticket:CM-23316
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
