Commit Graph

257 Commits

Author SHA1 Message Date
saravanank
6b5062cdd7 doc: updating pim.rst with bsm processing commands
Signed-off-by: Saravanan K <saravanank@vmware.com>
2019-05-14 21:42:22 -07:00
Mark Stapp
bbd8da796b
Merge pull request #4187 from donaldsharp/doc_pim
doc: Cleanup output of new PIM-EVPN doc
2019-04-24 15:18:27 -04:00
Mark Stapp
850af7ac4a
Merge pull request #4176 from qlyoung/doc-cleanup-ospf-apiserver
Cleanup OSPF API server docs
2019-04-24 14:49:16 -04:00
Quentin Young
e7a664c198 doc: pim evpn tabs -> spaces
And remove `interface` highlight directive

Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2019-04-23 19:04:45 +00:00
Donald Sharp
e2b5880e7b doc: Cleanup output of new PIM-EVPN doc
The PIM-EVPN doc was not rendering very well on the
website.  So Update documentation to allow it to render
better.

Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
2019-04-23 02:15:58 -04:00
Donald Sharp
79b50aa561 doc: Update show ip mroute command docs.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
2019-04-22 19:56:02 -04:00
Quentin Young
37f92f2215 doc: cleanup OSPF API server documentation
* Reflow to 80 columns
* Improve markup
* Add --apiserver option to example ospfd invocations
* Add note on requirement of this option to use api server

Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2019-04-22 20:22:00 +00:00
Jafar Al-Gharaibeh
c6f637132f
Merge pull request #4025 from AnuradhaKaruppiah/pim-evpn
pim-evpn: Forwarding overlay BUM traffic via multicast VxLAN tunnels in the underlay
2019-04-22 11:44:52 -05:00
Anuradha Karuppiah
745fc7a5ec doc: add config sample for pim-evpn
Sample l2-vni config via ifupdown2 -
auto vx-10100
iface vx-10100
	vxlan-id 10100
	bridge-access 100
	vxlan-local-tunnelip 27.0.0.11
	vxlan-mcastgrp 239.1.1.100 >>>>>>>>>.

Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
2019-04-20 08:33:23 -07:00
Donald Sharp
ca02cf8d11 doc: Cleanup documentation for new pim commands
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
2019-04-18 16:41:35 -04:00
Quentin Young
d79e0e085b doc: document bgp listen ranges and md5 behavior
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2019-04-16 15:28:20 +00:00
Wojciech Kozlowski
560470b552 doc: replace old text with info about integrated configuration mode
Signed-off-by: W. Kozlowski <wk@wojciechkozlowski.eu>
2019-04-09 22:38:35 +02:00
David Lamparter
59ce748be0
Merge pull request #3985 from rubenk/doc-fix-a-few-typos
doc: fix a couple of typos
2019-03-23 13:49:20 +01:00
Rubens Figueiredo
749afd7dce doc: route reflector documentation
Signed-off-by: Rubens Figueiredo <rubens@bisdn.de>
2019-03-21 10:34:28 +01:00
Ruben Kerkhof
f6aa36f5c6 doc: address review comment
'cannot' feels more natural

Signed-off-by: Ruben Kerkhof <ruben@rubenkerkhof.com>
2019-03-20 21:20:31 +01:00
Ruben Kerkhof
56f0bea718 doc: fix a couple of typos
Found with https://github.com/codespell-project/codespell

Signed-off-by: Ruben Kerkhof <ruben@rubenkerkhof.com>
2019-03-20 20:08:33 +01:00
Donald Sharp
b16b7e0756 doc: Update documentation about multipath
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
2019-03-06 10:47:21 -05:00
Donald Sharp
02c2ba9767
Merge pull request #3830 from opensourcerouting/cherrypicks
[master] cherrypick backlog
2019-02-21 07:58:34 -05:00
David Lamparter
bd2893d57f doc: update for new daemons settings
watchfrr_enable is ignored, watchfrr_options is unneeded and the
valgrind options have been replaced with daemon_wrap/all_wrap.

Signed-off-by: David Lamparter <equinox@diac24.net>
2019-02-19 21:38:23 +01:00
David Lamparter
afec87502a doc: document VTYSH_PAGER and "terminal paginate"
Signed-off-by: David Lamparter <equinox@diac24.net>
2019-02-18 14:39:13 +01:00
David Lamparter
856d02a59a doc: orange FRR theme
Signed-off-by: David Lamparter <equinox@diac24.net>
2019-02-18 14:39:13 +01:00
Donald Sharp
80d5ff338d sharpd: Add ability to track import-check nexthops
Add the ability to sharp to track import-check type routes
from the cli.  Update docs too.

Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
2019-02-13 09:28:38 -05:00
David Lamparter
0fe29323f5
Merge pull request #3723 from slrz/zebra-rtadv-add-rfc8106-support
zebra: add support for IPv6 RA options for DNS configuration (RFC8106)
2019-02-12 14:30:00 +01:00
Donald Sharp
86da53ab0e sharpd: Add 'sharp data nexthop' data dump
Add some basic data dumping about what we have watched
from the vty/vtysh cli for nexthops.

Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
2019-02-07 10:14:17 -05:00
Donald Sharp
f59e641827 sharpd: Add 'sharp data route" dump command
When you are using the install/remove routes command, the
output goes to a log file.  This command allows for ease
of dump of timing information from the vty or vtysh.

Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
2019-02-07 10:14:17 -05:00
Quentin Young
c9cf9db6b6 doc: fix missing backtick
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2019-02-04 17:37:54 +00:00
Lars Seipel
f9e824c5f8 doc: describe RA options for DNS configuration in ipv6.rst
Signed-off-by: Lars Seipel <ls@slrz.net>
2019-02-02 19:10:19 +01:00
Lars Seipel
8166d84086 doc: fix up mangled config example in ipv6.rst
Appears to be a remaining artifact of the Sphinx conversion.

Signed-off-by: Lars Seipel <ls@slrz.net>
2019-02-02 19:10:19 +01:00
David Lamparter
02a0df1f22 build, lib/yang: bake in extensions if possible
Starting with libyang 0.16.74, we can load internally embedded yang
extensions instead of going through the file system/dlopen.  Detect
support for this at build time and use if available.

NB: the fallback mechanism will go away in a short while.

Signed-off-by: David Lamparter <equinox@diac24.net>
2019-01-24 17:44:41 +01:00
Lou Berger
9af649da4b
Merge pull request #3570 from donaldsharp/dire_warning
more doc stuff for configure
2019-01-15 11:44:25 -05:00
Donald Sharp
bc1320290f doc: Add [no] bgp default ipv4-unicast documentation
This command had no documentation so add it in.

Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com.
2019-01-14 11:32:44 -05:00
Donald Sharp
7b5301f59d doc: Add more documentation around configure options
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
2019-01-09 08:47:52 -05:00
Quentin Young
2b5443c567
Merge pull request #3531 from marauderlabs/docs-fix
doc: Fix typos and grammar
2019-01-08 11:04:46 -05:00
Anand
fe93e2e396
doc: Fix typos and grammar
Signed-off-by: Anand <anandakumar.u@gmail.com>
2019-01-08 04:45:02 +00:00
Donald Sharp
413908931c doc: Update documentation to new functionality
Update sharp.rst to reflect new functionality in the `sharp install ..`
command.

Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
2019-01-03 09:57:06 -05:00
Renato Westphal
bbfaa7054a
Merge pull request #3516 from qlyoung/doc-ip-nht-resolve-via-default
doc: add `ip nht resolve-via-default`
2018-12-20 10:05:01 -02:00
Quentin Young
be11dfbf87 doc: exclude snmptrap.rst from build
This doc is .. include::'d in snmp.rst and needs to be ignored as part
of the main toctree build. This patch squashes a Sphinx build warning.

Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-12-19 18:10:41 +00:00
Quentin Young
43b8e264c8 doc: add ip nht resolve-via-default
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-12-19 17:55:05 +00:00
David Lamparter
fa62815e08 doc: re-add copyright & license note
This was mistakenly removed in the texi -> sphinx conversion.

Signed-off-by: David Lamparter <equinox@diac24.net>
2018-12-14 16:24:06 +01:00
David Lamparter
9c830772cd *: get rid of most daemons.conf references
There's a few left over to get compatibility and not break user
installs, but most is gone.

Signed-off-by: David Lamparter <equinox@diac24.net>
2018-12-06 23:05:48 +01:00
Philippe Guibert
a305be43e9 doc: add ldp information over transport connection
transport connection prefers ipv6, unless ipv4 is explicitly configured
on ldp.

Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
2018-11-28 14:26:15 +01:00
Quentin Young
cc4345d438 doc: use correct specifier for code block
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-10-28 16:19:36 +00:00
Quentin Young
740449aba0 doc: remove mention of 'secondary' ip[v6] commands
These haven't existed for 14 years

Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-10-28 07:24:36 +00:00
Lou Berger
50daf9a2d5
Merge pull request #3313 from qlyoung/doc-strip-whitespace
doc: strip trailing whitespace
2018-11-13 14:56:14 +07:00
Quentin Young
eebfb2335b doc: add missing docs for ipv6 isis router cmd
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
2018-10-28 01:31:08 +00:00
Donald Sharp
ff38f0fa7a
Merge pull request #3281 from opensourcerouting/update-libyang-instructions
doc: update libyang build instructions
2018-11-12 09:35:09 -05:00
Olivier Dugeon
ddd73a968d OSPF: Add support to multi-area to Router Info.
Router Information needs to specify the area ID when flooding scope is set to
  AREA. However, this authorize only one AREA. Thus, Area Border Router (ABR) are
  unable to flood Router Information Opaque LSA in all areas they are belongs to.

  The path implies that the area ID is no more necessary for the command
  'router-info area'. It remains suported for compatibility, but mark as
  deprecated. Documentation has been updated accordingly.

Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
2018-11-09 10:09:47 +01:00
Renato Westphal
f805c84eaf doc: update libyang build instructions
The --with-yangmodelsdir and --with-libyang-pluginsdir build-time options
pertain to FRR so they shouldn't be placed along with the libyang build
instructions. Move these instructions to where they belong to avoid
confusion.

Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
2018-11-03 15:42:56 -02:00
Donald Sharp
0100dfb9c1
Merge pull request #2705 from opensourcerouting/northbound-yang-v2
Northbound API
2018-10-31 18:50:45 -04:00
Tim Bray
30980e0adc
Link-detect documentation
As a quagga user, I didn't realise link-detect is on by default.
2018-10-29 21:12:14 +00:00