* stdbool.h should be widely supported by now, and the 'bool' type makes
more semantic sense than an integer type for boolean values.
(cherry picked from commit e8441a81f6c9f73bc8a25669003abffb40066703)
This extends the ip_mreq hack to DragonFlyBSD and SunOS. This has been
in pkgsrc for some time. I've cleaned up the pkgsrc patch a little and
am submitting it upstream. Credit is due to pkgsrc maintainers.
Tested on SmartOS (illumos).
Fixes: #819
Signed-off-by: Greg Troxel <gdt@ir.bbn.com>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
(cherry picked from commit b8a893c38e97377b2a2582b1621b988e55811412)
This shuts up make by default (can be reversed with "make V=1" or
--disable-silent-rules). This is useful since warnings and error
messages become more visible with less noise.
Tested on Linux with GNU make and FreeBSD with system's BSD make.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Acked-by: Paul Jakma <paul@jakma.org>
(cherry picked from commit cc81308148271aeed2277e16885ddca7e2d5bb9b)
These actually break configure on FreeBSD very subtly, because inet_aton
and __inet_aton are both detected, and then later other tests get
warnings about HAVE_INET_ATON being defined twice.
That said, they're incorrect to begin with since they detect alternative
functions but there is nothing in place to actually use these
alternates.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Acked-by: Greg Troxel <gdt@ir.bbn.com>
Acked-by: Feng Lu <lu.feng@6wind.com>
Acked-by: Paul Jakma <paul@jakma.org>
(cherry picked from commit 79f74962d20fa2c90df5a57335fc3b5e19bfeccf)
* lib/sigevent.c: (program_counter) extend to support more platforms. Joint
effort with Paul Jakma.
(cherry picked from commit b166ea2dda9f04a8b75e0bf5adb7064580695f22)
* Remove the old change from '08 to add in PIE arguments at automake level.
Versions of libtool since then know how to deal with -fpie and do the right
thing according to whether its building shared or executable objects.
So just pass '-fpie' as CFLAG and let libtool do its thing.
The default build needs vtysh and pimd as a default build so
that when a change is made we can catch build issues before they
become a problem.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
linux/mroutes.h and pim_mroute.h both have copies of the same structures.
This is causing failures in setsockopt(..., MRT_ADD_MFC,...) because
of data structure incompatibilities between the kernel and what
pim_mroute.h was providing. Modify the code to check for mroute.h
and include it if necessary. I did not modify the non linux/mroute.h
path because I do not have other systems to test on easily.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Welcome pimd to the Quagga daemon zoo!
This is a merge of commit 77ae369 ("pimd: Log ifindex found for an
interface when zebra lib reports a new connected address."), with
the intermediate "reconnect" changes removed (c9adf00...d274381).
d274381 is replaced with b162ab7, which includes some changes. In
addition, 4 reconnect-related changes and 1 cosmetic one have been
bumped out.
The rebase command used to produce the branch that is merged here is:
git rebase --onto b162ab7 c9adf00 77ae369
Note that 3 patches had their author rewritten from
"Anonymous SR#108542 <>" (which is not a valid git author ID)
to: "Savannah SR#108542 <nbahr@atcorp.com>" (which is the e-mail address
listed in the associated Savannah ticket)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
The code was using pragma's to override function calls
while there was code for platforms that don't support pragma's
Just remove the pragma usage from the program in it's entirety
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Don Slice <dslice@cumulusnetworks.com>
Reviewed-by: Daniel Walton <dwalton@cumulusnetworks.com>
IFLA_INFO_SLAVE_KIND is a new type of netlink message
If the kernel makes it available compile in support
else we'll just silently do the right thing.
Additionally reduce the test cases for netlink by 1
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: David Ahern <dsa@cumulusnetworks.com>
Reviewed-by: Don Slice <dslice@cumulusnetworks.com>
Reviewed-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Fix configure.ac to have the proper cumulus version #.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Daniel Walton <dwalton@cumulusnetworks.com>
This patch originated w/ Hannes Hofer <hhofer@barracuda.com>.
I've taken the patch fixed some bugs and reworked the code
to allow both poll and select to be choosen at compile time.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
There exist cases where Cumulus Code( in this case code surrounding
when we want to send Router Advertisements ) should only be
turned on for Cumulus Switches.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Modify the lib/ code to include the ability to interact
with systemd. Provide the ability to interact with
systemd's watchdog timer as well.
There is no code here that actually uses this change.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
configure.ac is looking for the setproctitle library,
which while it might be useful, we never call setproctitle
or any other function that the library might expose.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
MULTIPATH_NUM is setup inside of the Makefile.am DEFS to pass
in on the command line. This fix moves the MULTIPATH_NUM
from there into config.h.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The code has tests to see if the MULTIPATH_NUM == 0 and to
treat it like the user has entered 'Maximum PATHS'.
This 0 is treated as 64 internally. Remove this dependency
and setup MULTIPATH_NUM to 64 when --enable-multipath=0 from
the configure cli.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Daniel Walton <dwalton@cumulusnetworks.com>
Ticket: CM-6926
Reviewed By: CCR-3328
Tested: See bug
Restrict Shell access to those people who intentionally turn it on.
As that it can be used as a exploit to elevate permissions
BGP: Fix MINTTL and IPV6_MINHOPCOUNT
The #defines for IP_MINTTL and IPV6_MINHOPCOUNT need to be handled
correctly as part of the configure.ac code. Instead of hard coding
the values directly in the code
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This patch implements the 'update-groups' functionality in BGP. This is a
function that can significantly improve BGP performance for Update generation
and resultant network convergence. BGP Updates are formed for "groups" of
peers and then replicated and sent out to each peer rather than being formed
for each peer. Thus major BGP operations related to outbound policy
application, adj-out maintenance and actual Update packet formation
are optimized.
BGP update-groups dynamically groups peers together based on configuration
as well as run-time criteria. Thus, it is more flexible than update-formation
based on peer-groups, which relies on operator configuration.
[Note that peer-group based update formation has been introduced into BGP by
Cumulus but is currently intended only for specific releases.]
From 11098af65b2b8f9535484703e7f40330a71cbae4 Mon Sep 17 00:00:00 2001
Subject: [PATCH] updgrp commits
The whole IPv6 stack detection could need refactoring. But this
fixes the linux check to not assume glibc. Fixes build against
musl c-library.
Signed-off-by: Timo Teräs <timo.teras@iki.fi>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This header is non-standard (though present on many systems) and
there is no standard for what it should or should not define.
Remove it where it is not really needed. But add also a configure
check, so it can be used if available but otherwise fallback to
defining the needed macroes.
Signed-off-by: Timo Teräs <timo.teras@iki.fi>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
this is not a full release version, so neither release notes nor
documentation are updated yet. Also, signing the tag with my private
GPG key instead of the Quagga one.
commit d771020 "don't build tests unless make check is run" has made the
--{en,dis}able-tests switch completely useless. The differentiation is
now made by running "make check" or not doing so. The only effect of
the switch is an "empty" excursion of make into the tests/ directory.
(well, and it turns "make check" useless from the main directory if
--disable-tests is given, which I don't think makes sense either)
Acked-by: Greg Troxel <gdt@ir.bbn.com>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
libexecinfo is used to provide backtrace() on *BSD. The API is
compatible with glibc's, so this is a "free" improvement.
To improve configure behaviour, the following configure options are
modified/introduced:
* --enable-gcc-rdynamic now defaults to "on" if the compiler is gcc.
(I sadly wasn't able to find any documentation on the availability of
this option for llvm, even though at least the version I have
installed does support it)
* --enable-backtrace has been added. This behaves as off/auto/on
switch, i.e. giving either {dis,en}able will result in the requested
behaviour (or an error if support wasn't found)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
this just wraps the existing test programs in expect wrappers that make
their results usable to DejaGNU.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
DejaGNU seems to be the 'standard' GNU test framework (which by itself
doesn't say much), but it seems relatively usable and the "remote
system" capabilities might come in handy for virtualisation-based tests
for kernel interactions or something.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
this is not a full release version, so neither release notes nor
documentation are updated yet. Also, signing the tag with my private
GPG key instead of the Quagga one.
Quagga makes bad assumptions about sockaddr_dl (on NetBSD, but possibly
on other systems as well). Particularly, sizeof(struct sockaddr_dl)
returns a size that does not include the full sdl_data field, leading to
not enough data being copied. This breaks IPv6 RAs in particular, as
a broken mac address from sockaddr_dl will be included in the packets.
From: Matthias-Christian Ott <ott@mirix.org>
Tested-by: Uwe Toenjes <6bone@6bone.informatik.uni-leipzig.de>
[further simplified + more comments]
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Newer MacOSX versions have support for both IPv6 advanced socket API
RFCs (2292 and 3542) switchable in compile time, but neither of these
is default for some strange reason. RFC3542 will be default in future,
but for now we have to declare that we want to use the RFC3542 API
before including <netinet/in.h>.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
AM_CONFIG_HEADER has been deprecated for many years and is removed
completely from automake 1.13.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Measuring the resource usage of threads is moderately expensive
since it requires doing an additional system call everytime a
thread context switches. Make it possible to disable this with
a configuration option.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
LLVM clang does not support #pragma weak (bug 3679) on OS X. There are
other systems where the #pragma weak has varying syntax.
Added m4 file from the autoconf archives:
http://www.gnu.org/software/autoconf-archive/ax_sys_weak_alias.html
Fix up zebra/*_null.c files to use #pragma weak alias or stub functions
if not available. It's incomplete in that the different format #pragma
enable easier fixes on need.
Tested on 64bit OS X 10.7, FreeBSD 9.0 amd64 & i386 (32bit) using
gcc & clang. Tested on linux 64bit.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Don't error out when someone tries using --with-pkg-git-version on
something that isn't actually a git checkout (like a dist tarball).
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Intel's icc doesn't accept "-wd <number>" anymore, it's "-wd<number>"
these days. But, anyhow, the warnings disabled in Quagga's configure.ac
don't seem to appear anywhere at all, so let's just remove the option
completely.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
If enabled with --with-pkg-gitversion on ./configure, this will append
git version strings and branch information at the following places:
- overall version number: 0.99.21-g0123456
- login motd and show version: tag information + git id + branches
Sample output:
Hello, this is Quagga (version 0.99.21-g14b49ad-dirty).
Copyright 1996-2005 Kunihiro Ishiguro, et al.
This is a git build of quagga_0_99_21_release-106-g14b49ad-dirty
Associated branch(es):
local:master
[v2]: fix build without gitinfo (add "else" branch)
[v2]: fix for repos without any tags (different git describe output)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
