NEXTHOP_FLAG_ACTIVE currently means that the nexthop is considered
good enough to be installed. With current ecmp restrictions this
translation from multipath_num is enforced in the data plane.
The problem with this is of course that every data plane now
becomes concerned about the multipath num and must enforce it
independently. Currently *bsd does not honor multipath_num at
all and linux marks all nexthops as being installed even when
it honors a multipath_num that is less than the total.
This code change moves the multipath_num enforcement from a dataplane
decision to a zebra nexthop decision. Thus dataplanes now can
just install those nexthops marked as NEXTHOP_FLAG_ACTIVE
without having to worry about multipath_num.
*BSD will now respect multipath_num and Linux now properly notes
which routes are actually installed or not:
sharpd@donna ~/f/t/topotests> ps -ef | grep frr
frr 6261 1556 0 09:12 ? 00:00:00 /usr/lib/frr/zebra -e 2 --daemon -A 127.0.0.1
frr 6279 1556 0 09:12 ? 00:00:00 /usr/lib/frr/staticd --daemon -A 127.0.0.1
donna.cumulusnetworks.com(config)# do show ip route
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR, f - OpenFabric,
> - selected route, * - FIB route
K>* 0.0.0.0/0 [0/106] via 10.0.2.2, enp0s3, 00:00:45
S>* 4.4.4.4/32 [1/0] via 10.0.2.1, enp0s3, 00:00:02
* via 192.168.209.1, enp0s8, 00:00:02
via 192.168.210.1, enp0s9 inactive, 00:00:02
C>* 10.0.2.0/24 is directly connected, enp0s3, 00:00:45
C>* 192.168.209.0/24 is directly connected, enp0s8, 00:00:45
C>* 192.168.210.0/24 is directly connected, enp0s9, 00:00:45
donna.cumulusnetworks.com(config)#
sharpd@donna ~/f/t/topotests> ip route show
default via 10.0.2.2 dev enp0s3 proto dhcp metric 106
4.4.4.4 proto 196 metric 20
nexthop via 10.0.2.1 dev enp0s3 weight 1
nexthop via 192.168.209.1 dev enp0s8 weight 1
10.0.2.0/24 dev enp0s3 proto kernel scope link src 10.0.2.15 metric 106
172.17.0.0/16 dev docker0 proto kernel scope link src 172.17.0.1 linkdown
192.168.122.0/24 dev virbr0 proto kernel scope link src 192.168.122.1 linkdown
192.168.209.0/24 dev enp0s8 proto kernel scope link src 192.168.209.2 metric 105
192.168.210.0/24 dev enp0s9 proto kernel scope link src 192.168.210.2 metric 103
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Stop creating individual, one-time events as each batch of
incoming zserv/zapi messages is processed - use a singleton
event so that the incoming message activity is more fair if
the zebra main pthread has other events to run.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Looks like we missed some code in a non-normal compiled
code path for the bgp_path_info conversion.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Add some code that will reject local mac's from
being installed and add some code that will cause
a rescan when we have a local mac change.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com.
Add a bit of code that allows us to dump the mac hash. Future
commits will actually add entries to the mac hash and then operate
on it.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When you have configured soft reconfiguration inbound
for evpn allow it to notice and send in the evpn data
as appropriate.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The `struct bgp_route_evpn` and `struct overlay_index` data
structures are exactly the same. Reduce to 1.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reorder the numbering of the Zebra message flags and document
what each flag is supposed to do.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
We never used this information and it was merely stored.
Additionally this is not something that is a flag, it's
a status.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Newer versions of clang are failing on xpath length
not being sufficiently sized to hold all possible data
that could be thrown at it.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Make the v4 and v6 code paths for rib_XXX calls in kernel_socket
as similiar as we can possibly make them. There is no need
for code duplication at this point in time.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The rib_lookup_ipv4_route function is only used in a debug path.
Is only used for v4 and only checks to make sure that the rib
and fib are in sync( which is not needed/used/supported on other
platforms ). So let's just remove it.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
For nexthop handling use the actual resolved nexthop.
Nexthops are stored as a `special` list:
Suppose we have 3 way ecmp A, B, C:
nhop A -> resolves to nhop D
|
nhop B
|
nhop C -> resolves to nhop E
A and C are typically NEXTHOP_TYPE_IPV4( or 6 ) if they recursively resolve
We do not necessarily store the ifindex that this resolves to.
Current nexthop code only loops over A,B and C and uses those for
the zebra_rnh.c handling. So interested parties might receive non-fully
resolved nexthops( and they assume they are! ).
Let's convert the looping to go over all nexthops and only deal with
the resolved ones, so we will look at and use D,B and E.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
A recent commit broke this functionality, so add a very basic
route leak vrf test.
router bgp 99 vrf DONNA
address-family ipv4 uni
redistribute connected
import vrf EVA
router bgp 99 vrf EVA
address-family ipv4 uni
redistribute connected
import vrf DONNA
Routes should be leaked between the two vrf's. Ensure that it does.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
We have set up automated builds for the topotest images at dockerhub.
Therefore, people don't need to perform a local build to run the
topotests on docker, but can use the image built by dockerhub.
As there is not much benefit in building locally, but the disadvantage
of weird errors if using an outdated image, change the topotests target
to always pull the most recent image from dockerhub.
Add an environment variable to disable this, e.g. for local development.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
so as to isolate ospf contexts separately for each vrf, the interface
used is cornered to the passed vrf context.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
YANG allows lists without keys for operational data, in which case
the list elements are uniquely identified using a positional index
(starting from one).
This commit does the following:
* Remove the need to implement the 'get_keys' and 'lookup_entry'
callbacks for keyless lists.
* Extend nb_oper_data_iter_list() so that it special-cases keyless
lists appropriately. Since both the CLI and the sysrepo plugin
use nb_oper_data_iterate() to fetch operational data, both these
northbound clients automatically gain the ability to understand
keyless lists without additional changes.
* Extend the confd plugin to special-case keyless lists as well. This
was a bit painful to implement given ConfD's clumsy API, but
keyless lists should work ok now.
* Update the "test_oper_data" unit test to test keyless YANG lists in
addition to regular lists.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
During L3VNI add delete, configured non-default
route-target is not replayed correctly.
Non-default route-target should only be deleted
during unconfiguring under bgp vrf instance,
during delete of l3vni only unmap from the VRF.
during addition of l3vni map back to the VRF
Ticket:CM-21482
Testing Done:
Bring up evpn configuration with L3vni up with
non-default route-target.
Perform delete/add of L3vni and validated non-default
route-target is mapped back to vrf.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
