Traffic Engineering parameters are correctly advertised in LSP when
'mpls-te on' CLI command is present in the startup config file.
However, if IS-IS is started without TE enable at startup and
'mpls-te on' command is issued after, TE link parameters are never
announced. The patch correct this issue.
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
The "abort_if_not_found" parameter of nb_running_get_entry()
should be set to true only when this function is called during the
NB_EV_APPLY phase of a northbound callback. Failure to respect this
can lead to crashes when multiple configuration changes are being
committed at the same time.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
The new "event-counters" grouping is almost a 1:1 copy of the same
grouping from the IETF IS-IS module, except for the "lan-dis-changes"
leaf which was skipped (more work needs to be done to support it).
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
The new "adjacency-state" grouping is almost a 1:1 copy of the
same grouping from the IETF IS-IS module, except for the "usage"
and "lastuptime" leafs that were skipped (more work needs to be
done to support those).
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
In preparation to Segment Routing:
- Update the management of Traffic Engineering subTLVs to the new tlvs parser
- Add Router Capability TLV 242 as per RFC 4971 & 7981
- Add Segment Routing subTLVs as per draft-isis-segment-routing-extension-25
Modified files:
- isis_tlvs.h: add new structure to manage TE subTLVs, TLV 242 & SR subTLVs
- isis_tlvs.c: add new functions (pack, copy, free, unpack & print) to process
TE subTLVs, Router Capability TLV and SR subTLVs
- isis_circuit.[c,h] & isis_lsp.[c,h]: update to new subTLVs & TLV processing
- isis_te.[c,h]: remove all old TE structures and managment functions,
and add hook call to set local and remote IP addresses as wellas update TE
parameters
- isis_zebra.[c,h]: add hook call when new interface is up
- isis_mt.[c,h], isis_pdu.c & isis_northbound.c: adjust to new TE subTLVs
- tests/isisd/test_fuzz_isis_tlv_tests.h.gz: adapte fuuz tests to new parser
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
circuit deletion was being enforced by sending a fake IF_DOWN_FROM_Z
event for the circuit interface. This created a problem when the
circuit was enabled again, since isisd internal state machine was
expecting to see an IF_UP_FROM_Z that never came, as the interface
had not actually gone down.
As a consequence, disabling + re-enabling isis on an interface or
area would leave interfaces in a CONFIG state, and adjacencies were
not restored. Fix this by following the state machine and simply
disabling circuits rather than attempting to delete them forcefully.
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
as part of the 'ip router isis TAG' command we were not validating
the MTU of the interface against the minimum LSP MTU of the area.
This could cause an assertion when the circuit is created in the
APPLY phase.
Fixes issue #4825
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
* Remove sanity checks that are already done by northbound;
* Show error message on circuit absence;
* Use a better idiom for the configuration display code;
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Specify the ISIS BFD command in the YANG model and implement the
northbound callbacks.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
For some reason, the compiler on OpenBSD on our CI boxes doesn't like
struct initializers with ".a.b = x, .a.c = y", generating a warning
about overwritten initializers...
Signed-off-by: David Lamparter <equinox@diac24.net>
the vrf_id parameter is replaced by struct vrf * parameter.
this impacts most of the daemons that look for an interface based on the
name and the vrf identifier.
Also, it fixes 2 lookup calls in zebra and sharpd, where the vrf_id was
ignored until now.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Historically, isisd has been carrying around its own red-black tree to
manage its LSP DB in. This replaces that with the newly-added
DECLARE_RBTREE_*. This allows completely removing the dict_* code.
Signed-off-by: David Lamparter <equinox@diac24.net>
Due to recent modification in northbound API, replace
yang_dnode_get_entry() call by nb_running_get_entry() call.
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
Solve issue #4032
- Change MPLS-TE from global to per Area
- Add new mpls_te_area structure to area in replacement of global variable
isisMPLS_TE
- Move mpls-te from global to instance in frr-isisd.yang
- Change code in isis_te.c, isis_northbound.c, isis_cli.c, isis_pdu.c,
isis_lsp.c and isis_zebra.c accordingly
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
Introduce a hash table to keep track of user pointers associated
to configuration entries. The previous strategy was to embed
the user pointers inside libyang data nodes, but this solution
incurred a substantial performance overhead. The user pointers
embedded in candidate configurations could be lost while the
configuration was being edited, so they needed to be regenerated
before the candidate could be committed. This was done by the
nb_candidate_restore_priv_pointers() function, which was extremely
expensive for large configurations. The new hash table solves this
performance problem.
The yang_dnode_[gs]et_entry() functions were renamed and moved from
yang.[ch] to northbound.[ch], which is a more appropriate place
for them. This patch also introduces the nb_running_unset_entry()
function, the counterpart of nb_running_set_entry() (unsetting
user pointers was done automatically before, now it needs to be
done manually).
As a consequence of these changes, we shouldn't need support for
libyang private pointers anymore (-DENABLE_LYD_PRIV=ON). But it's
probably a good idea to keep requiring this feature as we might
need it in the future for other things (e.g. disable configuration
settings without removing them).
Fixes#4136.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
- Change MPLS-TE from global to per Area
- Add new mpls_te_area structure to area in replacement of global variable
isisMPLS_TE
- Move mpls-te frmo global to instance in frr-isisd.yang
- Change code in isis_te.c, isis_northbound.c, isis_cli.c, isis_pdu.c,
isis_lsp.c and isis_zebra.c accordingly
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
To align with the change to avoid the keyword 'delete', rename
the isis northbound handlers to '_destroy'.
Signed-off-by: Mark Stapp <mjstapp@gmail.com>
Some misc changes to resolve some c++ compilation errors.
The goal is only to permit an external module - a plugin,
for example - to see frr headers, not to support or encourage
contributions in c++. The changes include: avoiding use
of keywords like 'new', 'delete'; cleaning up implicit
type-casting from 'void *' in several places.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
`isis network point-to-point` was being rejected from the configuration
file as it was being processed before the reception of the UP zebra
notification for the interface. This meant that the `circ_type` was set
at CIRCUIT_T_UNKNOWN, which led the northbound callback to fail. This
check was removed as it was not really necessary; when the zebra
notification is received, the correct circuit type will be enforced,
but now the point-to-point config will be saved and correctly applied
when zebra recognizes the interface as a broadcast one.
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
isisd has both a circ_type and a circ_type_config variable to track
the network tpye of an interface. The former has no default, but the
latter defaults to broadcast. Adding that default makes sure that the
yang leaf won't be deleted, which is something that would not make
sense from an isisd perspective. We will need to add an operational
state leaf to match the potential difference between the configured
network type and the actual network type, since the latter might be
different based on the interface flags received from zebra.
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
As requested by the reviewers. Additionally, added a check when
setting a circuit on an interface to see if it is a loopback,
and in that case, set it to passive.
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
Note that we do not return the actual tlv_type and offset
of the erroneous TLV. This is because unpacking tlvs currently
uses a chain of function calls, where the notification can only
be sent at the start of the chain, but the tlv_type and offset
information are only available at the end. Unless we change the
code to propagate those values, we have no way to feed them to
the notification. So these leafs are not generated.
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
the original isisd code did not distinguish between
authentication_failure and authentication_type_failure, so
additional code had to be added to differentiate between the two
and to return the raw_pdu as requested by the IETF YANG model.
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
Note that the original IETF YANG model also included
a requirement to throttle such notifications so that they would
not be sent more often than once every 5 seconds. I did not
implement any throttling mechanism yet, mostly because I am
not sure whether this limit should apply to the entire isis daemon,
to each area, to each neighbor etc.
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
However it is not currently called anywhere, as I could not find a
place in the code where it felt appropriate.
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
