FRR has no option for the as-set for aggregate route
under IPV6 address family. Added the command to
configure the as-set option for IPV6.
Signed-off-by: vishaldhingra <vdhingra@vmware.com>
The -N <namespace> option is now used to control the location
of various control files and sockets. Update the documentation
to reflect this.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Simple documentation update for the new `clear ip mroute [vrf NAME] count`
command to the FRRouting documentation.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Introduce new cli commands ip igmp last-member-query-count <1-7>
ip igmp last-member-query-interval <1-255> deciseconds.
Display the config in show running config and show ip igmp interface
Signed-off-by: Sarita Patra <saritap@vmware.com>
Introduced a new command "show ip mroute summary"
to display total number of (*, G) and (S, G) mroutes
created and number of mroutes installed in the kernel.
Signed-off-by: Sarita Patra <saritap@vmware.com>
The `bgp bestpath prefix-validate disallow-invalid` command referenced in
the rpki documentation does not actually exist, remove the erroneous docs
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Place in the code the ability for end operators to know how
to modify MAX_FDS so that they can run large scale operations.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This code doees this:
a) Imagine ospf installs a route into zebra. Zebra crashes and
we restart FRR. If we are using the -k option on zebra than
all routes are re-read in, including this OSPF route.
b) Now imagine at the same time that zebra is starting backup
ospf on a different router looses a link to the this route.
c) Since zebra was run with -k this OSPF route is read back
in but never replaced and we now have a route pointing out
an interface to other routers that cannot handle it.
We should never allow users to implement bad options from zebra's
perspective that allow them to put themselves into a clear problem
state and additionally we have *absolutely* no mechanism to ever
fix that broken route without special human interaction.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
<Initial Code from Praveen Chaudhary>
Add the a `--graceful_restart X` flag to zebra start that
now creates a timer that pops in X seconds and will go
through and remove all routes that are older than startup.
If graceful_restart is not specified then we will just pop
a timer that cleans everything up immediately.
Signed-off-by: Praveen Chaudhary <pchaudhary@linkedin.com>
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The current wording can sometimes be misinterpreted to mean that this
command is optional, but for an MPLS-VPN to function a VPN label MUST be
assigned to routes exported from the VPN.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
this command is used when user wants to use the cbit value.
more information in the documentation.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
in ospf6d, the 'router-id' command must be prefixed with 'ospf6'.
Update the docs to reflect this.
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
now that bfd show commands have changed, update documentation so as to
reflect how to use vrf keyword in the show bfd commands.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Noticed that a couple of the `show zebra ...` commands are missing
from the zebra documentation that I use a bunch. Let's add them
in.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This command is broken and has been broken since the introduction
of vrf's. Since no-one has complained it is safe to assume that
there is no call for this specialized linux command. Remove
from the system with extreme prejudice.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The PIM-EVPN doc was not rendering very well on the
website. So Update documentation to allow it to render
better.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
* Reflow to 80 columns
* Improve markup
* Add --apiserver option to example ospfd invocations
* Add note on requirement of this option to use api server
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
watchfrr_enable is ignored, watchfrr_options is unneeded and the
valgrind options have been replaced with daemon_wrap/all_wrap.
Signed-off-by: David Lamparter <equinox@diac24.net>
When you are using the install/remove routes command, the
output goes to a log file. This command allows for ease
of dump of timing information from the vty or vtysh.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Starting with libyang 0.16.74, we can load internally embedded yang
extensions instead of going through the file system/dlopen. Detect
support for this at build time and use if available.
NB: the fallback mechanism will go away in a short while.
Signed-off-by: David Lamparter <equinox@diac24.net>
This doc is .. include::'d in snmp.rst and needs to be ignored as part
of the main toctree build. This patch squashes a Sphinx build warning.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Router Information needs to specify the area ID when flooding scope is set to
AREA. However, this authorize only one AREA. Thus, Area Border Router (ABR) are
unable to flood Router Information Opaque LSA in all areas they are belongs to.
The path implies that the area ID is no more necessary for the command
'router-info area'. It remains suported for compatibility, but mark as
deprecated. Documentation has been updated accordingly.
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
The --with-yangmodelsdir and --with-libyang-pluginsdir build-time options
pertain to FRR so they shouldn't be placed along with the libyang build
instructions. Move these instructions to where they belong to avoid
confusion.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
This plugin leverages the northbound API to integrate FRR with Sysrepo,
a YANG-based configuration and operational state data store.
The plugin is linked to the libsysrepo library and communicates with
the sysrepod daemon using GPB (Google Protocol Buffers) over AF_UNIX
sockets. The integration consists mostly of glue code that calls the
appropriate FRR northbound callbacks in response to events triggered
by the sysrepod daemon (e.g. request to change the configuration or to
fetch operational data).
To build the sysrepo plugin, provide the --enable-sysrepo option to the
configure script while building FRR (the libsysrepo library needs to be
installed in the system).
When installed, the sysrepo plugin will be available for all FRR daemons
and can be loaded using the -M (or --module) command line option.
Example: bgpd -M sysrepo.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
This plugin leverages the northbound API to integrate FRR with the ConfD
management agent.
The plugin is linked to the libconfd library and communicates with the
confd daemon using local TCP sockets. The integration consists mostly
of glue code that calls the appropriate FRR northbound callbacks in
response to events triggered by the confd daemon (e.g. request to change
the configuration or to fetch operational data).
By integrating FRR with the libconfd library, FRR can be managed using
all northbound interfaces provided by ConfD, including NETCONF, RESTCONF
and their Web API.
The ConfD CDB API is used to handle configuration changes and the ConfD
Data Provider API is used to provide operational data, process RPCs and
send notifications. Support for configuration management using the ConfD
Data Provider API is not available at this point.
The ConfD optional 'get_object()' and 'get_next_object()' callbacks were
implemented for optimal performance when fetching operational data.
This plugins requires ConfD 6.5 or later since it uses the new leaf-list
API introduced in ConfD 6.5.
To install the plugin, the --enable-confd option should be given to the
configure script, specifying the location where ConfD is installed.
Example: ./configure --enable-confd=/root/confd-6.6
When installed, the confd plugin will be available for all FRR daemons
and can be loaded using the -M (or --module) command line option.
Example: zebra -M confd.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
For some reason, automake was "randomizing" the order of these few lines
in the generated output Makefile.in.
I have absolutely no clue what's going on, but it's the only thing
preventing me from building reproducible source tarballs (i.e.
bit-exactly identical), so... just slightly "rephrase" this.
Should behave exactly the same as before.
Signed-off-by: David Lamparter <equinox@diac24.net>
Some draft ietf are not handle by :rfc: keyword. A workaround is
proposed, like it has been done for flowspec.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
This corrects the route map documentation to add the missing "prefix-list"
keyword, which is necessary when matching against a prefix list (as opposed to
an access list).
Additionally, change hyphens for underscores in the variables the user is
supposed to substitute in those commands, to prevent any confusion with the
"prefix-list" keyword itself, and also to make it more consistent with the
other documented commands (which are already using underscores).
Signed-off-by: Tore Anderson <tore@redpill-linpro.com>
Documentation on how to use multiple autonomous systems was inaccurate
and a bit scattered. Clarify usage of VRFs with multiple autonomous
systems, how to configure them, and their distinction from views. Also
moves a block on L3VPN VRFs out of the 'Basic Concepts' section.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
