Linux FRR builds without libcap are massively slow due to the
signal-based UID/GID synchronization across threads. This disables the
automatic fallback to build without libcap; it can still be requested
with "--disable-capabilities" but if the option isn't given in either
direction and we can't find libcap that's an error now.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This implements BMP. There's no fine-grained history here, the non-BMP
preparations are already split out from here so all that remains is BMP
proper.
Signed-off-by: David Lamparter <equinox@diac24.net>
The FRR community has run into an issue where keeping up our
CI system to work with solaris has become a fairly large burden.
We have also sent emails and asked around and have not found
anyone standing up saying that they are using Solaris.
Given the fact that we do not have any comprehensive testing
being done w/ solaris and the fact that we are getting a steady
stream of new features that will never work on solaris and
we cannot find anyone to say that they are using it. Let's
start the drawn out process of deprecating the code.
If in the mean-time someone comes forward with the fact that
they are using it we can then not deprecate it.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
After ~4 months of deprecation period [1], drop support for older
libyang versions that don't support embedded extensions.
In addition to support for embedded extensions, libyang 0.16-r3
contains several bug fixes and performance improvements compared
to libyang-0.16-r1. It was about time to update.
Fixes:
* Issue #3273
* Issue #3971
[1] See commit 68626e08.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
We can use `$ac_precious_vars` to get at autoconf's conception of which
environment variables are relevant. This makes "HOST_..." setup more
consistent for cross-compilation setups.
Fixes: #4006
Signed-off-by: David Lamparter <equinox@diac24.net>
* adds a `--with-clippy=...` option to use a prebuilt clippy binary
* limits the autoconf tests done for `--enable-clippy-only`
(e.g. no libyang)
Fixes: #3921Fixes: #4006
Signed-off-by: David Lamparter <equinox@diac24.net>
When the user specifies -N namespace allow it to influence the
frr_vtydir(DAEMON_VTY_DIR) to have namespace in it's path
like so: $frrstate_dir/<namespace>
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
If --ctl_socket is used this will override any other option and will
be used
If -N <namespace> is used, then we will setup the LDPD_SOCKET
in $frr_statedir/<namespace>/ldpd.sock
If neither option is used, then we will use $frr_statedir/ldpd.sock
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When selecting to run bfdd with -N allow the namespace passed
in to be added to the $frr_statedir/<namespace name>/bfdd.sock
If --bfdctl is passed in that will override the -N option.
If neither --bfdctl or -N is passed in then the default
of $frr_statedir/bfdd.sock is used.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When using -z, allow that to override the zapi domain socket
path. If using -N add the namespace name to the path to
$frr_statedir/<namespace>/zserv.api. If you don't specify
the -N or -z option then it is $frr_statedir/zserv.api
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Each of Lua's major versions are incompatible with each other. Ubuntu,
at least, does not provide a single liblua.so or /usr/include/lua; all
SOs and headers are versioned, e.g. liblua5.3.so and
/usr/include/lua5.3. There's already an m4 macro in the GNU collection
to handle this situation, so let's use that.
This allows building with Lua enabled to work on platforms other than
Fedora.
* Move lib/lua.[ch] -> lib/frrlua.[ch] to prevent path conflicts
* Fix configure.ac search for proper CPP and linker flags
* Add Lua include path to AM_CPPFLAGS
* Update vtysh/extract.pl.in
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
libyang 1.0 introduced a few changes in the user types API, and
these changes made FRR incompatible with libyang 1.x. In order to
ease our migration from libyang 0.x to libyang 1.x, let's disable
our libyang custom user types temporarily so that FRR can work
with both libyang 0.x and libyang 1.x. This should be especially
helpful to the CI systems during the transition. Once the migration
to libyang 1.x is complete, this commit will be reverted.
Disabling our libyang custom user types should have only
minimal performance implications when processing configuration
transactions. The user types infrastructure should be more important
in the future to perform canonization of YANG data values when
necessary.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Manually tested rather extensively in addition to included unit tests,
should work as intended.
NB: The OpenBSD futex() code is "future"; it's not actually in OpenBSD
(yet?) and thus untested.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
If a person who is compiling FRR does not specify the
multipath number on configure we are defaulting to a ecmp of 1.
Let's change this to 16. In this day and age most everything
supports actual ecmp.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
There's no good reason to not have these options default to the
installation path of tools/watchfrr.sh. Doing so allows us to ditch
watchfrr_options from daemons/daemons.conf completely.
Fixes: #3652
Signed-off-by: David Lamparter <equinox@diac24.net>
The debian/ directory is distributed separately for tarballs in 3.0
(quilt) format. Including it in the dist tarball causes problems with
automake when the separately distributed debian directory is unpacked on
top of the dist tarball; the clean and correct thing to do here is to
not include the debian/ directory in dist tarballs.
Users have two choices for building FRR Debian packages:
- build straight off git
- build from a "frr.tar" + "frr-debian.tar"
The tarsource.sh tool does the right thing when invoked with the -D
("Debian") option.
Signed-off-by: David Lamparter <equinox@diac24.net>
Commit fdbd8086b1 removed the explicit -lconfd flag from
lib_confd_la_LIBADD in favor of using the CONFD_LIBS variable. The
problem, however, is that ConfD doesn't use pkg-config nor anything
similar, so CONFD_LIBS is not created automatically by autotools.
Fix this problem by manually assigning -lconfd to the CONFD_LIBS
variable in the configure script.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Compiling an empty C file with most headers included and -Wc++-compat
gives us a build error if we introduce some stupid C++-incompatible
change.
While this won't catch everything, it's a good start.
Signed-off-by: David Lamparter <equinox@diac24.net>
- some target_CFLAGS that needed to include AM_CFLAGS didn't do so
- libyang/sysrepo/sqlite3/confd CFLAGS + LIBS weren't used at all
- consistently use $(FOO_CFLAGS) instead of @FOO_CFLAGS@
- 2 dependencies were missing for clippy
Signed-off-by: David Lamparter <equinox@diac24.net>
Starting with libyang 0.16.74, we can load internally embedded yang
extensions instead of going through the file system/dlopen. Detect
support for this at build time and use if available.
NB: the fallback mechanism will go away in a short while.
Signed-off-by: David Lamparter <equinox@diac24.net>
On Mac OS, where we don't have objcopy, ./configure logs:
checking for objcopy... no
checking for .interp value to use... ./configure: line 22174: conftest.interp: No such file or directory
Signed-off-by: Ruben Kerkhof <ruben@rubenkerkhof.com>
./configure on Mac OS logs:
checking whether ranlib supports D option... error: /Library/Developer/CommandLineTools/usr/bin/ranlib: unknown option character `D' in: -D
Usage: /Library/Developer/CommandLineTools/usr/bin/ranlib [-sactfqLT] [-] archive [...]
no
This is quite noisy.
Signed-off-by: Ruben Kerkhof <ruben@rubenkerkhof.com>
