Older versions of protobuf-c do not support version 3 of the
protocol. Add a check into the system to see if we have
version 3 available and if so, compile it in.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
If you compile FRR with no j factor zebra_mlag.c fails to
build because the vtysh extraction methodology runs first
before the protobuf compiler runs and that compilation does
not have the proper dependancy chain built for the inclusions
that zebra_mlag.c had. Moving the DEF* code into a zebra_mlag_vty.c
which can be included in the vtysh extraction code and has
no mlag.proto dependancies makes the compilation work better.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Handle the special case where a route update contains
no installed nexthops - that means the route is not
installed.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
This is pretty much just to get rid of the HAVE_CUMULUS. The
hook/module API is as "wtf" as it was before...
Signed-off-by: David Lamparter <equinox@diac24.net>
Add an api that creates a copy of a list of nexthops and
enforces the canonical sort ordering; consolidate some nhg
code to avoid copy-and-paste. The zebra dplane uses
that api when a plugin sets up a list of nexthops, ensuring
that the plugin's list is ordered when it's processed in
zebra.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
The processing of dataplane route notifications was a little
off-target after the nexthop-group re-work. This should allow
notifications to work better.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Linux has the idea of allowing a weight to be sent
down as part of a nexthop group to allow the kernel
to weight particular nexthop paths a bit more or less
than others.
See:
http://tldp.org/HOWTO/Adv-Routing-HOWTO/lartc.rpdb.multiple-links.html
Allow for installation into the kernel using the weight attribute
associated with the nexthop.
This code is foundational in that it just sets up the ability
to do this, we do not use it yet. Further commits will
allow for the pass through of this data from upper level protocols.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Use a per-nexthop flag to indicate the presence of labels; add
some utility zapi encode/decode apis for nexthops; use the zapi
apis more consistently.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Use correct state/flags when installing EVPN macs; when we
converted from raw netlink to the zebra dataplane, a state value
got lost.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
The flags can be important - like "threaded" - so we need to
actually capture them when plugins are registered.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Replace the existing list of nexthops (via a nexthop_group
struct) in the route_entry with a direct pointer to zebra's
new shared group (from zebra_nhg.h). This allows more
direct access to that shared group and the info it carries.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Problem reported by testing agency that RFC4861 section 6.2.5
states that a router should send an RA with a lifetime of 0
before ceasing to send RAs on the interface, or when the interace
is shutdown, or the router is shutdown. This fix adds that capability.
Ticket: CM-27061
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
For SR-TE we'll need to create Binding-SIDs which are essentially
LSPs that can push multiple outgoing labels. This commit sets the
groundwork for that. Luckily the netlink code didn't need to be
changed since it already supports pushing label stacks.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
The openfabric daemon has a longer name than anticipated for
`show zebra client summary` adjust to allow it to fit without
making columns all blomped.
Before:
robot# show zebra client summ
Name Connect Time Last Read Last Write IPv4 Routes IPv6 Routes
--------------------------------------------------------------------------------
static 00:00:06 00:00:06 00:00:06 4/0 0/0
openfabric 00:00:06 00:00:06 00:00:06 0/0 0/0
After:
[sharpd@robot frr4]$ vtysh -c "show zebra client summ"
Name Connect Time Last Read Last Write IPv4 Routes IPv6 Routes
--------------------------------------------------------------------------------
static 00:02:16 00:02:16 00:02:16 4/0 0/0
openfabric 00:02:16 00:02:16 00:02:16 0/0 0/0
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Problem reported by testing facility that our sending of Router
Advertisements more frequently than once very three seconds is not
compliant with rfc4861. Added a knob to turn off fast retransmits
in order to meet the requirement of the RFC.
Ticket: CM-27063
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Macvlan down event have sentinel check of its parent
link presence.
Ticket:CM-26622
Reviewed By:CCR-9326
Testing Done:
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
"show vrf vni" and "show evpn vni <l3vni>" commands
need to display correct router mac value.
"show evpn vni <l3vni>" detail l3vni needs to display
system mac as in PIP scenario value can be different.
Syste MAC would be derived from SVI interface MAC wherelse
Router MAC would be derived from macvlan interface MAC value.
Ticket:CM-26710
Reviewed By:CCR-9334
Testing Done:
TORC11# show evpn vni 4001
VNI: 4001
Type: L3
Tenant VRF: vrf1
Local Vtep Ip: 36.0.0.11
Vxlan-Intf: vx-4001
SVI-If: vlan4001
State: Up
VNI Filter: none
System MAC: 00:02:00:00:00:2e
Router MAC: 44:38:39:ff:ff:01
L2 VNIs: 1000
TORC11# show vrf vni
VRF VNI VxLAN IF L3-SVI State Rmac
vrf1 4001 vx-4001 vlan4001 Up 44:38:39:ff:ff:01
TORC11# show evpn vni 4001 json
{
"vni":4001,
"type":"L3",
"localVtepIp":"36.0.0.11",
"vxlanIntf":"vx-4001",
"sviIntf":"vlan4001",
"state":"Up",
"vrf":"vrf1",
"sysMac":"00:02:00:00:00:2e",
"routerMac":"44:38:39:ff:ff:01",
"vniFilter":"none",
"l2Vnis":[
1000,
]
}
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
macvlan interface up/down event triggers
bgp to send updates for evpn routes
with changed RMAC and nexthop IP values.
Ticket:CM-26190
Reviewed By:
Testing Done:
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
By default announct Self Type-2 routes with
system IP as nexthop and system MAC as
nexthop.
An API to check type-2 is self route via
checking ipv4/ipv6 address from connected interfaces list.
An API to extract RMAC and nexthop for type-2
routes based on advertise-svi-ip knob is enabled.
When advertise-pip is enabled/disabled, trigger type-2
route update. For self type-2 routes to use
anycast or individual (rmac, nexthop) addresses.
Ticket:CM-26190
Reviewed By:
Testing Done:
Enable 'advertise-svi-ip' knob in bgp default instance.
the vrf instance svi ip is advertised with nexthop
as default instance router-id and RMAC as system MAC.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Extract mac-vlan interface mac when a l3vni add is sent to bgp
Per L3VNI maintain vrr interface.
An api to extract vrr mac address from a vlan id, associated
master svi device.
When a l3vni operational up event is sent to bgpd,
extract vrr rmac along with svi rmac.
Ticket:CM-26190
Reviewed By:
Testing Done:
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Zebra MLAG is using "t_read" for multiple tasks, such as
1. For opening Communication channel with MLAG
2. In case conncetion fails, same event is used for retries
3. after the connection establishment, same event is used to
read the data from MLAG
since all these taks will never schedule together, this will not
cause any issues.
Signed-off-by: Satheesh Kumar K <sathk@cumulusnetworks.com>
edge-2> show evpn vni detail json
{
"vni":79031,
"type":"L3",
...,
...
} <<<<<< no comma
{
"vni":79021,
"type":"L3",
...,
...
} <<<<<< no comma
{
} <<<<<< blank
edge-2>
The fix is to pack json info into json_array before printing it.
Signed-off-by: Lakshman Krishnamoorthy <lkrishnamoor@vmware.com>
Apparently the multipath_num functionatlity has been broken
for a while because we were ignoring the recusive nexthops
when marking them inactive based on it.
This sets them as inactive as well if the parent breaks it.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
We were re-counting the entire group's active number on
every iteration of this nexthop_active_update() loop.
This is not great from a performance perspective but also
it was failing to properly mark things according to the
specified multipath_num.
Since a nexthop is set as active before this check, if its == to
the set ecmp, it gets marked inactive even though if its
under the max ecmp wanted!
ex)
set ecmp to 1.
`/usr/lib/frr/zebra -e 1`
All kernel routes will be marked inactive even with just one nexthop!
K 1.1.1.1/32 [0/0] is directly connected, dummy1 inactive, 00:00:10
K 1.1.1.2/32 [0/0] is directly connected, dummy2 inactive, 00:00:10
K 1.1.1.3/32 [0/0] is directly connected, dummy3 inactive, 00:00:10
K 1.1.1.4/32 [0/0] is directly connected, dummy4 inactive, 00:00:10
K 1.1.1.5/32 [0/0] is directly connected, dummy5 inactive, 00:00:10
K 1.1.1.6/32 [0/0] is directly connected, dummy6 inactive, 00:00:10
K 1.1.1.7/32 [0/0] is directly connected, dummy7 inactive, 00:00:10
K 1.1.1.8/32 [0/0] is directly connected, dummy8 inactive, 00:00:10
K 1.1.1.9/32 [0/0] is directly connected, dummy9 inactive, 00:00:10
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Clean up the relationships between zebra's rib and nexthop-group
headers as prep for adding a nexthop-group pointer to the
route_entry.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
