Use the zapi_nexthop struct with the mpls_labels
zapi messages instead of the special-purpose (and
more limited) nexthop struct that was being used.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
For Graceful restart clients have to send GR capabilities
library functions are added to encode capabilities and
also for zebra to decode client capabilities.
Co-authored-by: Santosh P K <sapk@vmware.com>
Co-authored-by: Soman K S <somanks@vmware.com>
Signed-off-by: Santosh P K <sapk@vmware.com>
These changes are for Zebra lib in order to supportGraceful Restart
feature. These changes are addedtemporarily, until Zebra Graceful
Restart lib Pr is merged.
Signed-off-by: Biswajit Sadhu <sadhub@vmware.com>
Signed-off-by: Soman K S <somanks@vmware.com>
Commit
68a02e06e5 broke nexthop encoding
for nexthop tracking.
This code combined the different types of nexthop encoding
being done in the zapi protocol. What was missed that
resolved nexthops of type NEXTHOP_TYPE_IPV4|6 have an ifindex
value that was not being reported. This commit ensures
that we always send this data( even if it is 0).
The following test commit will ensure that this stays working
as is expected by an upper level protocol.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Add error handling for top level failures (not able to
execute command, unable to find vrf for command, etc.)
With this error handling we add a new zapi message type
of ZEBRA_ERROR used when we are unable to properly handle
a zapi command and pass it down into the lower level code.
In the event of this, we reply with a message of type
enum zebra_error_types containing the error type.
The sent packet will look like so:
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Length | Marker | Version |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| VRF ID |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Command |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| ERROR TYPE |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
Also add appropriate hooks for clients to subscribe to for
handling these types of errors.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
If someone provides us more nexthops than our configured multipath
setting, drop the rest of them
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Use a per-nexthop flag to indicate the presence of labels; add
some utility zapi encode/decode apis for nexthops; use the zapi
apis more consistently.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
This includes:
1. Defining message formats
2. Stream Decoding after receiving the message at PIM
3. Handling MLAG UP & Down Notifications
Signed-off-by: Satheesh Kumar K <sathk@cumulusnetworks.com>
when ever a FRR Client wants to send any data to another node
using MLAG Channel, uses below mechanisam.
1. sends a MLAG Registration to zebra with interested messages that
it is intended to receive from peer.
2. In response to this request, Zebra opens communication channel with
MLAG. and also in Rx. diretion zebra forwards only those messages which
client shown interest during registration
3. when client is no-longer interested in communicating with MLAG, client
posts De-register to Zebra
4. if this is the last client which is interested for MLAG Communication,
zebra closes the channel.
why PIM Needs MLAG Communication
================================
1. In general on LAN Networks elecetd DR will send the Join towards
Multicast RP in case of a LHR and Register in case of FHR.
2. But in case DR Goes down, traffic will be re-converged only after
the New DR is elected, but this can take time based on Hold Timer to
detect the DR down.
3. this can be optimised by using MLAG Mecganisam.
4. and also Traffic can be forwarded more efficiently by knowing the cost
towards RP using MLAG
Signed-off-by: Satheesh Kumar K <sathk@cumulusnetworks.com>
With commit: a9ff90c41b
the vrf_id_t was changed from a uint16_t to a uint32_t
Zebra tracked the last command sent to it's peer via peeking
into the data it was sending to each client ( since we had
lost the idea of what the command was when it was time to track
the data ).
Add a define to track this and add a bit of verbiage
to the code to allow us to notice when we screw with
the header again so that this is just fixed correctly
when it happens again.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The vrf_id in `zsend_interface_vrf_update()` is encoded as
a long via `stream_putl()`, we should decode it as such
as well.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
This includes:
1. Defining message formats
2. Stream Decoding after receiving the message at PIM
3. Handling MLAG UP & Down Notifications
Signed-off-by: Satheesh Kumar K <sathk@cumulusnetworks.com>
For all the places we have a zclient->interface_up convert
them to use the interface ifp_up callback instead.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Switch the zclient->interface_add functionality to have everyone
use the interface create callback in lib/if.c
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
when ever a FRR Client wants to send any data to another node
using MLAG Channel, uses below mechanisam.
1. sends a MLAG Registration to zebra with interested messages that
it is intended to receive from peer.
2. In response to this request, Zebra opens communication channel with
MLAG. and also in Rx. diretion zebra forwards only those messages which
client shown interest during registration
3. when client is no-longer interested in communicating with MLAG, client
posts De-register to Zebra
4. if this is the last client which is interested for MLAG Communication,
zebra closes the channel.
why PIM Needs MLAG Communication
================================
1. In general on LAN Networks elecetd DR will send the Join towards
Multicast RP in case of a LHR and Register in case of FHR.
2. But in case DR Goes down, traffic will be re-converged only after
the New DR is elected, but this can take time based on Hold Timer to
detect the DR down.
3. this can be optimised by using MLAG Mecganisam.
4. and also Traffic can be forwarded more efficiently by knowing the cost
towards RP using MLAG
Signed-off-by: Satheesh Kumar K <sathk@cumulusnetworks.com>
This new message makes it possible to install/reinstall LSPs with
multiple nexthops using a single ZAPI message.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
* Add ability to specify the nexthop type;
* Add ability to install or not a FTN (in addition to an LSP).
These two additions will be useful to install local SR Prefix-SIDs
configured with the no-PHP option.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Use the route type and instance instead of the route distance
to identify MPLS FTNs. This is a more robust approach since the
routing daemons can modify the distance of their announced routes
via configuration, which can cause inconsistencies.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Do this for the following reasons:
* Improve modularity of the code by separating the decoding of the
ZAPI messages from their processing;
* Create an API that is easier to use by the client daemons.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Some other ZAPI decode functions still use void return values and
can't propagate stream errors to their callers. They need to be fixed
as well in the future.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Sort nexthops before we push them to zebra. This offloads
the nexthop sorting zebra is doing onto the upper level protocols
so that when it gets to zebra and we construct a group, it just has
to append them to the tail for every nexthop.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
when requesting a specific label chunk (e.g. for the SRGB),
it might happen that we cannot get what we want. In this
event, we must be prepared to receive a response with no
label chunk. Without this fix, if the remote label manager
was not able to alloate the chunk we requested, we would
hang indefinitely trying to read data from the stream which
was not there.
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
For SRGB, we need to support chunk requests starting at a
specific point in the label space, rather than just asking
for any sufficiently large chunk. To this purpose, we extend
the label manager api to request a chunk with a base value;
if the base is set to 0, the label manager will behave as it
currently does, i.e. fetching the first free chunk big enough
to satisfy the request.
update all the existing calls to get chunks from the label
manager so that they use MPLS_LABEL_BASE_ANY as the base
for the requested chunk
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
Field vrf_id is replaced by the pointer of the struct vrf *.
For that all other code referencing to (interface)->vrf_id is replaced.
This work should not change the behaviour.
It is just a continuation work toward having an interface API handling
vrf pointer only.
some new generic functions are created in vrf:
vrf_to_id, vrf_to_name,
a zebra function is also created:
zvrf_info_lookup
an ospf function is also created:
ospf_lookup_by_vrf
it is to be noted that now that interface has a vrf pointer, some more
optimisations could be thought through all the rest of the code. as
example, many structure store the vrf_id. those structures could get
the exact vrf structure if inherited from an interface vrf context.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
the vrf_id parameter is replaced by struct vrf * parameter.
this impacts most of the daemons that look for an interface based on the
name and the vrf identifier.
Also, it fixes 2 lookup calls in zebra and sharpd, where the vrf_id was
ignored until now.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
vrf pointer is used as reference when calling if_get_by_name() function.
this will permit to create interfaces with an unknown vrf_id, since it
is only necessary to get the vrf structure to store the interfaces.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
When you have compiled FRR with a large multipath number
then encoding large ecmp routes between zebra and the
routing daemons. There exists a theoritical size
of multipath that will cause the encoding to be larger
than the ZEBRA_MAX_PACKET_SIZ. In the cases where
we have allocated streams that will encode routes
then let's ensure that whatever size we have will
auto-fit what we say we can send.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This macro:
- Marks ZAPI callbacks for readability
- Standardizes argument names
- Makes it simple to add ZAPI arguments in the future
- Ensures proper types
- Looks better
- Shortens function declarations
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
These updates act as triggers to pimd to -
1. join the MDT for rxing VxLAN encapsulated BUM traffic
2. register the local-vtep-ip as a source for the MDT
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Problem found in bgpd where it wasn't learning interface address
information at startup due to the interface information becoming
available before the bgp instance was created. This issue was
caused by an earlier change that tried to make the interface
information discovery process more efficient but left this hole
for bgpd. For now, putting back in the previous method of
gathering interface info via the zclient_send_reg_requests call
and will revisit a more efficient way to get the info in the future.
Ticket: CM-23932
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
