Future commits are going to introduce more rigor in
state setting in the case of received results from
the data plane. So let us move the DPLANE_OP_ROUTE_DELETE
state check to the same spot as the rest of the code that
is handling a particular operation.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Modify the meta_queue insertion such that we only enqueue
the route_node into one meta_queue instead of several.
Suppose we have multiple route_entries associated with
a particular node from rip, bgp, staticd. If we receive a
route update from rip, we would enqueue the route_node into
the 1, 2, 3 meta-nodes. Which means that we would run
the entire process of figuring out a route 3 times, while
nothing would change the second two times.
Modify the code to choose the lowest meta-queue and
install it into that one for processing.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Pass lists of results back to zebra from the dataplane subsystem
(and pthread). This helps reduce the lock/unlock cycles when
zebra is busy. Also remove a couple of typedefs that made their
way into the dataplane header file - those violate the FRR style
guidelines.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
The route_info data structure already had a mapping of route type
to admin distance. Consolidate the meta_queue_map information
into this route_info data structure. This is to reduce the number
of places we need to remember to touch when adding a new routing
protocol.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When a route removal failure happens return to the installing
protocol that the route deletion failed.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
In the zebra rib processing workqueue, set a small timeout
so that we will wait a short time if the queue into the
async dataplane is full. This helps avoid a situation where
the zebra main pthread constantly retries rib work without
giving the dataplane pthread a chance to make progress.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
NEXTHOP_FLAG_ACTIVE currently means that the nexthop is considered
good enough to be installed. With current ecmp restrictions this
translation from multipath_num is enforced in the data plane.
The problem with this is of course that every data plane now
becomes concerned about the multipath num and must enforce it
independently. Currently *bsd does not honor multipath_num at
all and linux marks all nexthops as being installed even when
it honors a multipath_num that is less than the total.
This code change moves the multipath_num enforcement from a dataplane
decision to a zebra nexthop decision. Thus dataplanes now can
just install those nexthops marked as NEXTHOP_FLAG_ACTIVE
without having to worry about multipath_num.
*BSD will now respect multipath_num and Linux now properly notes
which routes are actually installed or not:
sharpd@donna ~/f/t/topotests> ps -ef | grep frr
frr 6261 1556 0 09:12 ? 00:00:00 /usr/lib/frr/zebra -e 2 --daemon -A 127.0.0.1
frr 6279 1556 0 09:12 ? 00:00:00 /usr/lib/frr/staticd --daemon -A 127.0.0.1
donna.cumulusnetworks.com(config)# do show ip route
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR, f - OpenFabric,
> - selected route, * - FIB route
K>* 0.0.0.0/0 [0/106] via 10.0.2.2, enp0s3, 00:00:45
S>* 4.4.4.4/32 [1/0] via 10.0.2.1, enp0s3, 00:00:02
* via 192.168.209.1, enp0s8, 00:00:02
via 192.168.210.1, enp0s9 inactive, 00:00:02
C>* 10.0.2.0/24 is directly connected, enp0s3, 00:00:45
C>* 192.168.209.0/24 is directly connected, enp0s8, 00:00:45
C>* 192.168.210.0/24 is directly connected, enp0s9, 00:00:45
donna.cumulusnetworks.com(config)#
sharpd@donna ~/f/t/topotests> ip route show
default via 10.0.2.2 dev enp0s3 proto dhcp metric 106
4.4.4.4 proto 196 metric 20
nexthop via 10.0.2.1 dev enp0s3 weight 1
nexthop via 192.168.209.1 dev enp0s8 weight 1
10.0.2.0/24 dev enp0s3 proto kernel scope link src 10.0.2.15 metric 106
172.17.0.0/16 dev docker0 proto kernel scope link src 172.17.0.1 linkdown
192.168.122.0/24 dev virbr0 proto kernel scope link src 192.168.122.1 linkdown
192.168.209.0/24 dev enp0s8 proto kernel scope link src 192.168.209.2 metric 105
192.168.210.0/24 dev enp0s9 proto kernel scope link src 192.168.210.2 metric 103
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The rib_lookup_ipv4_route function is only used in a debug path.
Is only used for v4 and only checks to make sure that the rib
and fib are in sync( which is not needed/used/supported on other
platforms ). So let's just remove it.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Limit the number of updates processed from the incoming queue;
add more stats. Fill out apis for dataplane providers; convert
route update processing to provider model; move dataplane
status enum
Signed-off-by: Mark Stapp <mjs@voltanet.io>
When the rib code is informed that a table is closing/
going away, only try once to uninstall associated routes from
the fib/dataplane. The close path can be called multiple times
in some cases - zebra shutdown, e.g.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Impose a configurable limit on the number of route updates
that can be queued towards the dataplane subsystem.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Correct use of netlink_parse_info() in the netlink fuzzing path.
Also clarify a couple of comments about pthreads.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
We need a bit of special handling for system routes, which need
to be offered for redistribution even though they won't be
passing through the dplane system.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Set SELECTED re immediately in rib_process, without expecting
that fib install has completed. Remove premature redistribute
call also.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Reduce or eliminate use of global zebra_ns structs in
a couple of netlink/kernel code paths, so that those paths
can potentially be made asynch eventually.
Slide netlink_talk_info into place to remove dependency on core
zebra structs; add accessors for dplane context block
Start init of route context from zebra core re and rn structs;
start queueing and event handling for incoming route updates.
Expose netlink apis that don't rely on zebra core structs;
add parallel route-update code path using the dplane ctx;
simplest possible event loop to process queued route'
updates.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
The `struct zebra_ns` data structure is being used
for both router information as well as support for
the vrf backend( as appropriate ). This is a confusing
state. Start the movement of `struct zebra_ns` into
2 things `struct zebra_router` and `struct zebra_ns`.
In this new regime `struct zebra_router` is purely
for handling data about the router. It has no knowledge
of the underlying representation of the Data Plane.
`struct zebra_ns` becomes a linux specific bit of code
that allows us to handle the vrf backend and is allowed
to have knowledge about underlying data plane constructs.
When someone implements a *bsd backend the zebra_vrf data
structure will need to be abstracted to take advantage of this
instead of relying on zebra_ns.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
During a debugging session last night I discovered that I was
still having some `fun` figuring out why zebra was not making
a route's nexthop active. After some debugging I figured out
that I was missing some states that we could end up in that
didn't have debug information about what happened in nexthop_active.
Add the missing breadcrumbs for nexthop resolution. In addition
add a bit of code to notice the ebgp state without recursion turned
on and to let the user know about it.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
on some cases, kernel routes are not selected, because the kernel
suppressed it without informing the netlink layer that the route has
been suppressed ( for instance, when an interface goes down, the route
never goes back when interface goes up again). This commit intends to
suppress that entry from zebra.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Work to handle the route-maps, namely the header changes in zebra_vrf.h
and the mapping of using that everywhere
Signed-off-by: vishaldhingra vdhingra@vmware.com
Wrapper the get/set of the table->info pointer so that
people are not directly accessing this data.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Debugging inactive nexthops in zebra can be quite difficult
and non-obvious what has gone wrong. Add detailed rib
debugs for the cases where we decide that a nexthop is
inactive so that we can more easily debug a reason
for the failure.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The _route_entry_dump function was not handling the nexthop as passed
in from an upper level protocol appropriate and as such not displaying
the v4/v6 nexthop right in the case where we have both going.
Additionally dump the nexthop vrf as well.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
For OpenFabric operation, we need to be able to install routes via
interfaces without any IPv4 addresses configured. Introduce a flag
ZEBRA_FLAG_ONLINK which upper protocols can set on a route they send
towards zebra, to force the nexthops to be considered onlink.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
