Allow bandwidth up to 1000000 Mb/s (ie. 1 Tb/s) and document it.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
IRDP client (rdisc) was deleted from iputils more than 2 years ago. It's
time to drop IRDP, but first let's stop building and including it in the
packages by default to see if anyone will be complaining.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Make link-params a presence container and activate it when entering the
node. The "enable" command is not necessary anymore but kept hidden for
backwards compatibility.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Introduce new "[no] multicast <enable|disable>" command to be able to
remove the configuration. Current "[no] multicast" command cannot be
removed. Current command is hidden but still works for backwards
compatibility.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Add documentation for per VRF RPKI commands
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
mgmtd has to know if netns is used as the vrf backend to correctly
process interface names in northbound.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Also change `be_client_xpaths` to `be_client_config_xpaths` referred in the doc
to make much clearer it's use (since there's a separate `be_client_oper_xpaths`.
Signed-off-by: Christian Hopps <chopps@labn.net>
Setting this variable to true makes NB ignore only configuration-related
callbacks. CLI-related callbacks are still loaded and executed, so
rename the variable to make it clearer.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Currently, there's a single operation type which doesn't return error
if the object doesn't exists. To be compatible with NETCONF/RESTCONF,
we should support differentiate between DELETE (fails when object
doesn't exist) and REMOVE (doesn't fail if the object doesn't exist).
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
When filtering with `debug bgp updates in x.x.x.x prefix-list plist`, we want
to filter out unnecessary messages like:
```
127.0.0.1(Unknown) rcvd UPDATE wlen 0 attrlen 20 alen 5
```
Such a line as above will be repeated for all the paths received and it's useless
without knowing the prefix (because NLRIs are not parsed yet).
But want to see only relevant ones:
```
127.0.0.1(Unknown) rcvd UPDATE w/ attr: nexthop 127.0.0.1, origin i, path 65002
127.0.0.1(Unknown) rcvd 10.255.255.1/32 IPv4 unicast
```
With `debug bgp updates detail` we can combine this to something like:
```
127.0.0.1(Unknown) rcvd UPDATE w/ attr: nexthop 127.0.0.1, origin i, path 65002
127.0.0.1(Unknown) rcvd UPDATE wlen 0 attrlen 20 alen 5
127.0.0.1(Unknown) rcvd 10.255.255.1/32 IPv4 unicast
```
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
Add the 'computed' keyword for a given metric.
> [..]
> metric te computed
When set by the PCC, the PCE must send back a computed metric
value in the PCResponse value.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
- recommend using libyang 2.1.128 but accept 2.0.0 for now.
- update ubuntu building doc to add GRPC section
- update ubuntu reference docker builds to match grpc doc change
Signed-off-by: Christian Hopps <chopps@labn.net>
The `show segment-routing srv6 manager` CLI command allows users to
print the SRv6 information. Currently, the SRv6 information includes
only the SRv6 encapsulation source address.
In this commit, we add the documentation for the
`show segment-routing srv6` command.
Signed-off-by: Carmine Scarpitta <carmine.scarpitta@uniroma2.it>
Explain that an export route target list can be configured
alternatively by using route-maps.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
It should be possible to reset the configured msd value,
and not mentioning the previous msd value.
> ubuntu2204(config-sr-te-pcep-pcc)# no msd
> % Command incomplete: no msd
> ubuntu2204(config-sr-te-pcep-pcc)#
Fix this by defining the msd parameter optional, and
separating the 'no msd' command from the 'msd' command.
Fixe: efba0985fc ("pathd: Add optional support for PCEP to pathd")
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
With a BGP configuration with ipv4 peering, and ipv6 peering, an snmpwalk
is stopped while walking over the bgp4v2NlriTable
snmpwalk -c TEST -v2c -On -Ln 1.1.1.2 .1.3.6.1.3.5.1.1.4
[...]
.1.3.6.1.3.5.1.1.4.1.2.1.2.32.0.0.0.0.0.0.0.0.0.0.0.0.0.0.1 = Gauge32: 13380
.1.3.6.1.3.5.1.1.9.1.1.1.1.1.1.1.0.24.0.0.0.0 = Gauge32: 0
.1.3.6.1.3.5.1.1.9.1.1.1.1.1.1.1.0.24.0.0.0.0 = Gauge32: 0
>= .1.3.6.1.3.5.1.1.9.1.1.1.1.1.1.1.0.24.0.0.0.0
The walk stopped because the index used in the NlriTable entries is
decrementing, and this is against the snmp specifications. Also, the
computed index is wrong, and does not match the provided
draft-ietf-idr-bgp4-mibv2-1 specification.
Fix this by computing a valid index, and by finding out the next
consecutive prefix.
The resulting changes do not break the walk, and the output is changed:
root@dut-vm:~# snmpwalk -v 2c -c public -Ln -On localhost 1.3.6.1.3.5.1.1.9.1
.1.3.6.1.3.5.1.1.9.1.1.1.1.1.1.10.200.0.0.24.1.10.125.0.2.1 = Gauge32: 0
.1.3.6.1.3.5.1.1.9.1.1.1.1.1.1.10.244.0.0.24.1.10.125.0.2.1 = Gauge32: 0
.1.3.6.1.3.5.1.1.9.1.2.1.1.1.1.10.200.0.0.24.1.10.125.0.2.1 = INTEGER: 1
.1.3.6.1.3.5.1.1.9.1.2.1.1.1.1.10.244.0.0.24.1.10.125.0.2.1 = INTEGER: 1
.1.3.6.1.3.5.1.1.9.1.3.1.1.1.1.10.200.0.0.24.1.10.125.0.2.1 = INTEGER: 1
.1.3.6.1.3.5.1.1.9.1.3.1.1.1.1.10.244.0.0.24.1.10.125.0.2.1 = INTEGER: 1
.1.3.6.1.3.5.1.1.9.1.4.1.1.1.1.10.200.0.0.24.1.10.125.0.2.1 = INTEGER: 1
.1.3.6.1.3.5.1.1.9.1.4.1.1.1.1.10.244.0.0.24.1.10.125.0.2.1 = INTEGER: 1
.1.3.6.1.3.5.1.1.9.1.5.1.1.1.1.10.200.0.0.24.1.10.125.0.2.1 = Hex-STRING: 0A C8 00 00
.1.3.6.1.3.5.1.1.9.1.5.1.1.1.1.10.244.0.0.24.1.10.125.0.2.1 = Hex-STRING: 0A F4 00 00
Fixes: c681e937d7 (bgpd: Implement SNMP
BGP4V2-MIB (bgp4V2NlriTable), part 1)
Fixes: 2ce69011c4 (bgpd: Implement SNMP
BGP4V2-MIB (bgp4V2NlriTable), part 2)
Signed-off-by: Francois Dumontet <francois.dumontet@6wind.com>
use CHECK_FLAG
fix comment spaces
change zlog_debug to zlog_warn
safeguard on updated_route
added doc/developer/bmp.rst to subdir.am
other qol changes
Signed-off-by: Maxence Younsi <mx.yns@outlook.fr>
moved loc-rib uptime field "bgp_rib_uptime" to struct bgp_path_info_extra for memory concerns
moved logic into bgp_route_update's callback bmp_route_update
written timestamp in per peer header
Signed-off-by: Maxence Younsi <mx.yns@outlook.fr>
Allows you to run daemons under valgrind integrated with gdb. When daemons are
run with the ``--gdb-daemons/--gdb-routers`` options they will be wired up to
valgrind using vgdb (valgrind tool) so gdb will stop when valgrind errors are
encountered.
Signed-off-by: Christian Hopps <chopps@labn.net>
