The usage of the `bgp bestpath med missing-as-worst` command
was being accepted and applied during bestpath, but during output
of the routes affected by this it would not give any indication
that this was happening or what med value was being used.
Fixes: #15718
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
When trying to connect to a BGP peer that does not respons, the 'show
bgp neighbors' command does not give any indication on the local and
remote addresses used:
> # show bgp neighbors
> BGP neighbor is 192.0.2.150, remote AS 65500, local AS 65500, internal link
> Local Role: undefined
> Remote Role: undefined
> BGP version 4, remote router ID 0.0.0.0, local router ID 192.0.2.1
> BGP state = Connect
> [..]
> Connections established 0; dropped 0
> Last reset 00:00:04, Waiting for peer OPEN (n/a)
> Internal BGP neighbor may be up to 255 hops away.
> BGP Connect Retry Timer in Seconds: 120
> Next connect timer due in 117 seconds
> Read thread: off Write thread: off FD used: 27
The addressing information (address and port) are only available
when TCP session is established, whereas this information is present
at the system level:
> root@ubuntu2204:~# netstat -pan | grep 192.0.2.1
> tcp 0 0 192.0.2.1:179 192.0.2.150:38060 SYN_RECV -
> tcp 0 1 192.0.2.1:46526 192.0.2.150:179 SYN_SENT 488310/bgpd
Add the display for outgoing BGP session, as the information in
the getsockname() API provides information for connected streams.
When getpeername() API does not give any information, use the peer
configuration (destination port is encoded in peer->port).
> # show bgp neighbors
> BGP neighbor is 192.0.2.150, remote AS 65500, local AS 65500, internal link
> Local Role: undefined
> Remote Role: undefined
> BGP version 4, remote router ID 0.0.0.0, local router ID 192.0.2.1
> BGP state = Connect
> [..]
> Connections established 0; dropped 0
> Last reset 00:00:16, Waiting for peer OPEN (n/a)
> Local host: 192.0.2.1, Local port: 46084
> Foreign host: 192.0.2.150, Foreign port: 179
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
When attempting to get the src and destination addresses of a given
connection, the API may return the NULL pointer, but further code
in bgp_zebra_nexthop_set() already does a check about the given
pointer.
Relaxing the error code for all the returned adressing.
Fixes: 1ff9a34058 ("bgpd: bgpd-fsm-fix.patch")
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Prompt nothing for an empty (and failed) operation. Take
`bgp graceful-restart` as an example:
Before:
```
anlan(config-router)# bgp graceful-restart
Graceful restart configuration changed, reset all peers to take effect
anlan(config-router)# bgp graceful-restart
Graceful restart configuration changed, reset all peers to take effect
anlan(config-router)#
```
After:
```
anlan(config-router)# bgp graceful-restart
Graceful restart configuration changed, reset all peers to take effect
anlan(config-router)# bgp graceful-restart
anlan(config-router)#
```
Signed-off-by: anlan_cs <anlan_cs@tom.com>
The same command should be accepted, it is an empty operation. Take
`neighbor <X> graceful-restart-helper` as an example:
Before:
```
anlan(config-router)# neighbor 3.3.3.3 graceful-restart-helper
Graceful restart configuration changed, reset this peer to take effect
anlan(config-router)# neighbor 3.3.3.3 graceful-restart-helper
Graceful restart configuration changed, reset this peer to take effect
% The Graceful Restart command used is not valid at this moment.
anlan(config-router)#
```
After:
```
anlan(config-router)# neighbor 3.3.3.3 graceful-restart-helper
Graceful restart configuration changed, reset this peer to take effect
anlan(config-router)# neighbor 3.3.3.3 graceful-restart-helper
Graceful restart configuration changed, reset this peer to take effect
anlan(config-router)#
```
Signed-off-by: anlan_cs <anlan_cs@tom.com>
BGP receives notification from zebra about an vpn that
needs to be installed into the evpn tables. Unfortunately
this function was walking the entirety of evpn tables
3 times. Modify the code to walk the tree 1 time and
to just look for the needed route types as you go.
This reduces, in a scaled environment, processing
time of the zclient_read function from 130 seconds
to 95 seconds. For a up / down / up interface
scenario.
Signed-off-by: Rajasekar Raja <rajasekarr@vndia.com>
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The 'show bgp neighbors' output appends additional lines after GR mode
helpers.
> # show bgp neighbors
> [..]
> End-of-RIB received: IPv4 VPN
> Local GR Mode: Helper*
>
> Remote GR Mode: Helper
>
> R bit: True
>
Fix this by not appending the extra line feed.
> # show bgp neighbors
> [..]
> End-of-RIB received: IPv4 VPN
> Local GR Mode: Helper*
> Remote GR Mode: Helper
> R bit: True
Fixes: 0e4e879b40 ("bgpd: fix silly format string SNAFU")
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Current changes deals with EVPN routes installation to zebra.
In evpn_route_select_install() we invoke evpn_zebra_install/uninstall
which sends zclient_send_message().
This is a continuation of code changes (similar to
ccfe452763) but to handle evpn part
of the code.
Ticket: #3390099
Signed-off-by: Rajasekar Raja <rajasekarr@nvidia.com>
When receiving a BGP update that includes a colored extended community,
the nexthop is tracked in the bgp nexthop tracking context, but the
color is never recorded. Adding to this, the BGP route is not prevented
from being installed without hte color.
Actually, the srte color is set only when the SRTE_COLOR attribute is set.
And that attribute value is only set when an ext. community is locally
created, or an srte value is set, but not when a BGP update with a color
ext. community is received.
Fix this by setting the SRTE_COLOR attribute on this last case.
Fixes: 442e2edcfa ("bgpd: add functions related to srte_color management")
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Currently bgp_path_info's are stored in reverse order
received. Sort them by the best path ordering.
This will allow for optimizations in the future on
how multipath is done.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Do not reap instead let's schedule for deletion
and let best_path_selection take care of the deletion
as it should.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Currently evpn code calls bgp_best_selection for local
decisions for local tables to figure out what to do.
This is also pi based so let's note that the pi has
been changed before calling bgp_best_selection.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
This will allow a consistency of approach to adding/removing
pi's to from the workqueue for processing as well as properly
handling the dest->info pi list more appropriately.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
bgp_damp.c has an instance of bgp_path_info_delete is called.
Thus setting up the path info for deletion, but since it never
calls bgp_process, it can never be deleted. This means that in
a dampening situation, after a withdrawal the path_info would
stick around. Schedule the path for deletion.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Add a new flag BGP_PATH_UNSORTED to keep track
of sorted -vs- unsorted path_info's. Add some
ability to the system to understand when that
flag is set.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Add a debug function to allow developers to dump flags
associated with a bgp_path_info in a human readable format.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Modify update_evpn_type5_route_entry to return a pointer to the
struct bgp_path_info modified in this function. This code
merely follows the standards used in other bgp_evpn.c code
where the update function returns the pointer to the path
info.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The nexthop tracking never displays the prefix that
has been used in ZEBRA to resolve its nexthop. This
information will be useful if some decision has to be
taken regarding any loops, that is to say if for instance
a BGP prefix is resolved over a prefix in ZEBRA that is
exactly the same.
Store the value in bgp nexthop context, and display it.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
The asan memory leak has been detected:
> Direct leak of 16 byte(s) in 1 object(s) allocated from:
> #0 0x7f9066dadd28 in __interceptor_calloc (/usr/lib/x86_64-linux-gnu/libasan.so.4+0xded28)
> #1 0x7f9066779b5d in qcalloc lib/memory.c:105
> #2 0x556d6ca527c2 in vpn_leak_zebra_vrf_sid_update_per_af bgpd/bgp_mplsvpn.c:389
> #3 0x556d6ca530e1 in vpn_leak_zebra_vrf_sid_update bgpd/bgp_mplsvpn.c:451
> #4 0x556d6ca64b3b in vpn_leak_postchange bgpd/bgp_mplsvpn.h:311
> #5 0x556d6ca64b3b in vpn_leak_postchange_all bgpd/bgp_mplsvpn.c:3751
> #6 0x556d6cb9f116 in bgp_zebra_process_srv6_locator_chunk bgpd/bgp_zebra.c:3337
> #7 0x7f906685a6b6 in zclient_read lib/zclient.c:4490
> #8 0x7f9066826a32 in event_call lib/event.c:2011
> #9 0x7f906675c444 in frr_run lib/libfrr.c:1217
> #10 0x556d6c980d52 in main bgpd/bgp_main.c:545
> #11 0x7f9065784c86 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x21c86)
Fix this by freeing the previous memory chunk.
Fixes: b72c9e1475 ("bgpd: cli for SRv6 SID alloc to redirect to vrf (step4)")
Fixes: 527588aa78 ("bgpd: add support for per-VRF SRv6 SID")
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
If we receive an attribute that is handled by bgp_attr_malformed(), use
treat-as-withdraw behavior for unknown (or missing to add - if new) attributes.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
Currently BGP attempts to send route change information
to it's peers *before* the route is installed into zebra.
This creates a bug in suppress-fib-pending in the following
scenario:
a) bgp suppress-fib-pending and bgp has a route with
2 way ecmp.
b) bgp receives a route withdraw from peer 1. BGP
will send the route to zebra and mark the route as
FIB_INSTALL_PENDING.
c) bgp receives a route withdraw from peer 2. BGP
will see the route has the FIB_INSTALL_PENDING and
not send the withdrawal of the route to the peer.
bgp will then send the route deletion to zebra and
clean up the bgp_path_info's.
At this point BGP is stuck where it has not sent
a route withdrawal to downstream peers.
Let's modify the code in bgp_process_main_one to
send the route notification to zebra first before
attempting to announce the route. The route withdrawal
will remove the FIB_INSTALL_PENDING flag from the dest
and this will allow group_announce_route to believe
it can send the route withdrawal.
For the master branch this is ok because the recent
backpressure commits are in place and nothing is going
to change from an ordering perspective in that regards.
Ostensibly this fix is also for operators of Sonic and
will be backported to the 8.5 branch as well. This will
change the order of the send to peers to be after the
zebra installation but sonic users are using suppress-fib-pending
anyways so updates won't go out until rib ack has been
received anyways.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
When BGP has been asked to wait for FIB installation, on route
removal a return call is likely to not have the dest since BGP
will have cleaned up the node, entirely. Let's just note that
the prefix cannot be found if debugs are turned on and move on.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Without this patch, we always set the BGP Prefix SID attribute flag without
checking if it's malformed or not. RFC8669 says that this attribute MUST be discarded.
Also, this fixes the bgpd crash when a malformed Prefix SID attribute is received,
with malformed transitive flags and/or TLVs.
Reported-by: Iggy Frankovic <iggyfran@amazon.com>
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
