Ensure that the route-entry QUEUED flag is cleared in the async
notification path, as it is in the normal results processing
code path.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
When interfaces change while they are up, Zebra sends if_up
notifications with the updated interface info. Change Zebra to send
if_down notifications with interface info when the interface changes
while it is down.
VRRP, at the least, needs these to know about MAC changes while an
interface is down.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
When we are sending a redistribute_update, pass the old_re in
so that if we still have it around we can update the calling protocol.
Test:
router ospf
redistribute sharp
!
sharp install route 4.5.6.7 nexthop 192.168.201.1 1
Now add a `ip route 4.5.6.7/32 192.168.201.1`.
This causes zebra to replace the sharp route with the static route.
No update is sent to ospf and debug:
2019/08/01 19:02:38.271998 ZEBRA: 0:4.5.6.7/32: Redist update re 0x12fdbda0 (static), old 0x0 (None)
With fix:
2019/08/01 19:15:09.644499 ZEBRA: 0:4.5.6.7/32: Redist update re 0x1ba5bce0 (static), old 0x1beea4e0 (sharp)
2019/08/01 19:15:09.645462 OSPF: ospf_zebra_read_route: from client sharp: vrf_id 0, p 4.5.6.7/32
Ticket: CM-25847
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Delete an auto MAC with no neighbor associated,
when its VNI is down.
In Following sequence stale MAC entry retained in
FRR (zebra).
- Local MAC-IP pair
- MAC is deleted in bridge fdb table
- VNI is down, triggers IP (neigh) entries removed
from FRR DB.
- MAC retained as AUTO MAC with neigh list count 0.
- When VNI is UP again, stale MAC entry retained in FRR
DB.
When the MAC-IP pair moves behind remote VTEP, local VTEP
fails to add remote entry as its MAC is in auto state.
Ticket:CM-25504
Reviewed By:
Testing Done:
Validated the sequence with fix and auto MAC is deleted
when VNI is down.
When VNI comes up, the remote MAC-IP is added to FRR (Zebra)
and kernel.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Add info info in local mac del debug,
the local sequence and assoicated neigh count.
remote_mac_ip_add modify debug to display
flags value to cover local, remote and auto flags
for the MAC.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
The changes came as part of PR #4730, checks
only variable mac, which is never null. Even
for ip version of cli hits "mac" case statement
and failing the clear cli.
Testing Done:
Before Fix:
VTEP-03# show evpn arp-cache vni 1002 duplicate
VNI 1002 #ARP (IPv4 and IPv6, local and remote) 1
IP Type State MAC Remote VTEP
Seq #'s
11.11.11.11 remote active aa:22:aa:aa:aa:aa 27.0.0.16
7/8
VTEP-03# clear evpn dup-addr vni 1002 ip 11.11.11.11
% Requested MAC does not exist in VNI 1002
Post fix:
VTEP-03# clear evpn dup-addr vni 1002 ip 11.11.11.11
VTEP-03#
VTEP-03# show evpn mac vni all duplicat
VNI 1002 #MACs (local and remote) 1
MAC Type Intf/Remote VTEP VLAN Seq #'s
aa:aa:aa:aa:aa:aa remote 27.0.0.16 7/8
Post fix:
VTEP-03# clear evpn dup-addr vni 1002 mac aa:aa:aa:aa:aa:aa
VTEP-03#
VTEP-03# clear evpn dup-addr vni 1002 ip 11.11.11.11
VTEP-03#
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
The 'show ip import-check A.B.C.D` code was generating
a /32 prefix for comparison. Except import-check was
being used by bgp to track networks. So they could
have received a /24( or anything the `network A.B.C.D/M`
statement specifies ).
Consequently when we do a `show ip import-check A.B.C.D`
we would never find the network but a `show ip import-check |
grep A.B.C.D` would find it.
Fix the exact comparison to a match.
For the `show ip nht A.B.C.D` case we are comparing
a /32 to a /32 so prefix_match will work still.
While a `show ip import-check A.B.C.D` will now show
the expected behavior as well.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The flag ROUTE_ENTRY_NEXTHOPS_CHANGED is only ever set or unset.
Since this flag is not used for anything useful, remove from system.
By changing this flag we have re-ordered `internalStatus' of json
output of zebra rib routes. Go through and fix up tetsts to
use the new values.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The code as written before this code change point would enqueue
every system route type to be refigured when we have an
interface event. I believe this was to originally handle bugs
in the way nexthop tracking was handled, mainly that if you keep
asking the question you'll eventually get the right answer.
Modify the code to not do this, we have fixed nexthop tracking
to not be so brain dead and to know when it needs to refigure
a route that it is tracking.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When a new system route comes in and we have a pre-existing
non-system route we are not deleting the current system
route from the linux kernel.
Modify the code such that when a route replace is sent
to the kernel with a new route as a system route and
the old route as a non-system route do a delete of
the old route so it is no longer in the kernel.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Problem reported where certain routes were not being passed on to
clients if they were operated on while still queued for kernel
installation. Changed it to defer working on entries that were
queued to dplane so we could operate on them after getting an
answer back from kernel installatino.
Ticket: CM-25480
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Introducing a 3rd state for route_map_apply library function: RMAP_NOOP
Traditionally route map MATCH rule apis were designed to return
a binary response, consisting of either RMAP_MATCH or RMAP_NOMATCH.
(Route-map SET rule apis return RMAP_OKAY or RMAP_ERROR).
Depending on this response, the following statemachine decided the
course of action:
State1:
If match cmd returns RMAP_MATCH then, keep existing behaviour.
If routemap type is PERMIT, execute set cmds or call cmds if applicable,
otherwise PERMIT!
Else If routemap type is DENY, we DENYMATCH right away
State2:
If match cmd returns RMAP_NOMATCH, continue on to next route-map. If there
are no other rules or if all the rules return RMAP_NOMATCH, return DENYMATCH
We require a 3rd state because of the following situation:
The issue - what if, the rule api needs to abort or ignore a rule?:
"match evpn vni xx" route-map filter can be applied to incoming routes
regardless of whether the tunnel type is vxlan or mpls.
This rule should be N/A for mpls based evpn route, but applicable to only
vxlan based evpn route.
Also, this rule should be applicable for routes with VNI label only, and
not for routes without labels. For example, type 3 and type 4 EVPN routes
do not have labels, so, this match cmd should let them through.
Today, the filter produces either a match or nomatch response regardless of
whether it is mpls/vxlan, resulting in either permitting or denying the
route.. So an mpls evpn route may get filtered out incorrectly.
Eg: "route-map RM1 permit 10 ; match evpn vni 20" or
"route-map RM2 deny 20 ; match vni 20"
With the introduction of the 3rd state, we can abort this rule check safely.
How? The rules api can now return RMAP_NOOP to indicate
that it encountered an invalid check, and needs to abort just that rule,
but continue with other rules.
As a result we have a 3rd state:
State3:
If match cmd returned RMAP_NOOP
Then, proceed to other route-map, otherwise if there are no more
rules or if all the rules return RMAP_NOOP, then, return RMAP_PERMITMATCH.
Signed-off-by: Lakshman Krishnamoorthy <lkrishnamoor@vmware.com>
A client was sending zebra a route with no nexthops! Update the
error message to tell us *Which* daemon is doing this.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Initial commit of understanding interface speed changes
on startup was this commit:
dc7b3caefb
Effectively we had encountered situations on system startup
where the interface speed for a device was not properly setup
when zebra learns about the interface ( Imagine a bond being
brought up and the controlling software creating the bond
is not fast given system load, the bond's speed changes
upwards for each interface added ).
The initial workup on this was to allow a 15 second window
and then just reread the interface speed. We've since noticed
that under heavy system load on startup this is not always sufficient.
So modify the code to wait the 15 seconds and then check the interfaces
speed. If the interfaces speed is still MAX_UINT32T or it has changed
let's wait a bit longer and try again.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
in order to both streamline the code and allow users to
define their own specialized versions of the LM api handlers,
define hooks for the 4 main primitives offered by the label
manager (i.e. connect, disconnect, get_chunk and release_chunk),
and have the existing code be run in response to a hook_call.
Additionally, have the responses to the requesting daemon be
callable from an external API.
Note that the proxy version of the label manager was a source of
issues and hardly used in practice. With the new hooks, users with
more complex requirements can simply plug in their own code to
handle label distribution remotely, so there is no longer a reason
to maintain this code.
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
when requesting a specific label chunk (e.g. for the SRGB),
it might happen that we cannot get what we want. In this
event, we must be prepared to receive a response with no
label chunk. Without this fix, if the remote label manager
was not able to alloate the chunk we requested, we would
hang indefinitely trying to read data from the stream which
was not there.
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
For SRGB, we need to support chunk requests starting at a
specific point in the label space, rather than just asking
for any sufficiently large chunk. To this purpose, we extend
the label manager api to request a chunk with a base value;
if the base is set to 0, the label manager will behave as it
currently does, i.e. fetching the first free chunk big enough
to satisfy the request.
update all the existing calls to get chunks from the label
manager so that they use MPLS_LABEL_BASE_ANY as the base
for the requested chunk
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
Add a conditional to guard against segfaulting on the debug
statement when zvrf lookup fails.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
initially, that command was dumping only tables from default vrfs.
the change here consists in dumping all the tables from all the vrfs.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
the table identifier is made visible. this permits to easily know which
table identifier is dumped, or which table that entry belongs to, when
one calls 'show ip route all' command.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
this vty command explores the routing tables available, and dumps the
routing entries. there is no need to pass a table identifier, since all
configured tables are dumped.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
in addition to support for tcpflags, it is possible to filter on any
protocol. the filtering can then be based with iptables.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
zvni setup in zebra is controlled via bgpd i.e. advertise_all_vni
from bgpd triggers this setup. As a part of zvni creation we may need
to setup BUM mcast SG entries which are propagated to pimd for MDT setup.
Now pimd may not be present at the time of zvni creation or may restart
post zvni creation so we need a mechanism to replay (on pimd startup) and
to cleanup (on pimd stop). This is addressed via zebra_vxlan_sg_replay and
zebra_evpn_pim_cfg_clean_up.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
