When the linux kernel adds/deletes routes, the
metric is important, but our routing protocols
add/delete in a slightly different manner,
so allow kernel metrics to match so that our
rib matches the kernel's fib.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
- VTY_NEWLINE is out
- thread API changed with the extra arg
- struct rib got renamed to struct route_entry
- MPLS_NO_LABEL was removed
- RB-tree implementation has some extra args
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
With the introduction of the pseudowire manager, the NHT tracking code
needs to detect label updates as well.
Create a specific nexthop flag for that. We can't reuse the
RIB_ENTRY_NEXTHOPS_CHANGED flag for this porpose because this flag is
always cleared and reevaluated in rib_process(), setting it outside that
function is a nop.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
If the remote end of a pseudowire becomes unreachable (no route or an
unlabeled route), then it must be uninstalled. In the same way, when
the remote end becomes reachable, the pseudowire must be installed.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Base framework for supporting MPLS pseudowires in FRR.
A consistent zserv interface is provided so that any client daemon
(e.g. ldpd, bgpd) can install/uninstall pseudowires in a standard
way. Static pseudowires can also be implemented by using the same
interface.
When zebra receives a request to install a pseudowire and the installation
in the kernel or hardware fails, a notification is sent back to the
client daemon and a new install attempt is made every 60 seconds (until
it succeeds).
Support for external dataplanes is provided by the use of hooks to
install/uninstall pseudowires.
Signed-off-by: ßingen <bingen@voltanet.io>
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Implicit-null labels are never installed in the FIB but we need to keep
track of them because of L2/L3 VPN nexthop resolution.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Fixes#407 for FreeBSD and NetBSD.
OpenBSD uses ioctl to fetch interface information on startup and the
SIOCGIFMEDIA command is just too cumbersome to use.
The best way to fix the problem for OpenBSD is probably to stop treating
it differently from the other BSDs for no apparent reason. There should
be nothing preventing us to make OpenBSD use the routing socket to fetch
interface information on startup (we already do it to detect runtime
changes). This is something that should be done in a separate commit
after a careful analysis.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Not being able to get the interface speed is a common
occurrence for some interface types. Convert this
these outputs to a guarded debug.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Currently, FRR does not do any linking between local MACs and neighbors.
We found this necessary when dealing with centralized GW. A neigh is considered local only when the mac is learnt locally as well.
Ticket: CM-16544
Review: CCR-6388
Unit-test: Manual/Evpn-Smoke
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
The defines:
ONE_DAY_SECOND
ONE_WEEK_SECOND
ONE_YEAR_SECOND
were being defined all over the system, move the
define to a central location.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This adds "@tcp" as new choice on the -z option present in zebra and the
protocol daemons. The --enable-tcp-zebra option on configure is no
longer needed, both UNIX and TCP socket support is always available.
Note that @tcp should not be used by default (e.g. in an init script),
and --enable-tcp-zebra should never have been in any distro package
builds, because
**** TCP-ZEBRA IS A SECURITY PROBLEM ****
It allows arbitrary local users to mess with the routing table and
inject bogus data -- and also ZAPI is not designed to be robust against
attacks.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This was incorrectly implemented to begin with (it only re-added routes,
but didn't remove them) and is now covered in static_ifindex_update.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Whenever an interface is created or deleted in the system, we need to
check whether we have static routes referencing that interface by name.
If so, we need to [un]install these routes.
This has the unfortunate side effect of making static routes with
non-existent interfaces disappear from "show ip route", but I think
that's acceptable (and I don't see a "good" fix for that).
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
The hash key function choosen for mac vni's would tend
to clump the key value to the same number. Use a better
hash key generator to spread the hash values out.
A bad hash key might lead to O(2^n) memory consumption
because the hash size is doubled, each time a backet
exceeds a predefined threshold. This quickly leads
to OOM. Fixing this issue by fixing the hash
key generation to actually spread the keys out.
Ticket: CM-17412
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Kernel does not send the best route after adding or deleting routes, if
we treat routes for an existing prefix as implicit withdraw the zebra RIB
goes out of sync with FIB and can announce wrong route to protocols.
host:~# vtysh -c 'show ip route'
S>* 0.0.0.0/0 [0/0] via 192.168.1.1, eth0
C>* 192.168.1.0/24 is directly connected, eth0
host:~# ip route add 192.0.2.0/24 via 192.168.1.101 metric 100
host:~# vtysh -c 'show ip route'
S>* 0.0.0.0/0 [0/0] via 192.168.1.1, eth0
K>* 192.0.2.0/24 via 192.168.1.101, eth0
C>* 192.168.1.0/24 is directly connected, eth0
host:~# ip route add 192.0.2.0/24 via 192.168.1.102 metric 50
host:~# vtysh -c 'show ip route'
S>* 0.0.0.0/0 [0/0] via 192.168.1.1, eth0
K>* 192.0.2.0/24 via 192.168.1.102, eth0
C>* 192.168.1.0/24 is directly connected, eth0
host:~# ip route del 192.0.2.0/24 via 192.168.1.102 metric 50
host:~# vtysh -c 'show ip route'
S>* 0.0.0.0/0 [0/0] via 192.168.1.1, eth0
C>* 192.168.1.0/24 is directly connected, eth0
host:~# ip route show 192.0.2.0/24
192.0.2.0/24 via 10.10.1.101 dev eth0 metric 100
Signed-off-by: Jorge Boncompte <jbonor@gmail.com>
Some routing protocols advertise route MTU (e.g. NHRP), with this patch
installed routes in the kernel have the advertised MTU.
Signed-off-by: Jorge Boncompte <jbonor@gmail.com>
RTA_PAYLOAD() return value depends on the platform bits.
make[5]: Nothing to be done for 'all-am'.
Making all in zebra
CC rt_netlink.o
../../zebra/rt_netlink.c: In function 'netlink_macfdb_change':
../../zebra/rt_netlink.c:1695:63: error: format '%ld' expects argument of type 'long int', but argument 7 has type 'unsigned int' [-Werror=format=]
"%s family %s IF %s(%u) brIF %u - LLADDR is not MAC, len %ld",
^
../../zebra/rt_netlink.c: In function 'netlink_ipneigh_change':
../../zebra/rt_netlink.c:2024:57: error: format '%ld' expects argument of type 'long int', but argument 6 has type 'unsigned int' [-Werror=format=]
"%s family %s IF %s(%u) - LLADDR is not MAC, len %ld",
^
Signed-off-by: Jorge Boncompte <jbonor@gmail.com>
Zebra receiving a macip_del message will automatically call
into the set_master function( a pim function ). Add missing
break statement
Ticket: CM-16841
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Don Slice <dslice@cumulusnetworks.com>
Now we have a single command for IPv4 static routes and another one for
IPv6 static routes (+ one command for IPv4 multicast static routes).
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Fully specified routes are useful when you need to ensure that the
nexthop address is reachable through the specified interface.
Addresses Issue #641.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
This is a preliminary step to join both functions into one later.
The main idea here is to make these functions have separate arguments
for the nexthop address and the nexthop interface, and adjust the call
sites appropriately. Having an argument that could be a nexthop address
OR a nexthop interface was making the code very hard to follow. With
this simplification, a lot of code duplication was removed and now both
functions look very similar.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
We don't need to enforce that the interface exists because the route can
be activated later once the interface becomes available. We already do
this for IPv4 routes and IPv6 routes with both a nexthop address and a
nexthop interface.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
- The 'reject' keyword was being lost
- Hide the "ip route A.B.C.D A.B.C.D" config options since these will be
displayed as "ip route A.B.C.D/X"
The pimregX devices when created by the kernel are put into
the default vrf. When pim gets the callback that the device
exists, check to see if it is a pimregX device and if so
move it into the appropriate vrf.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This current implementation unfortunately must
ask the kernel for all mroutes because vrf's
do not have the ability to request a single
mroute at this time.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This reverts commit c14777c6bf.
clang 5 is not widely available enough for people to indent with. This
is particularly problematic when rebasing/adjusting branches.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
This allows frr-reload.py (or anything else that scripts via vtysh)
to know if the vtysh command worked or hit an error.
Implement support for sticky (static) MACs. This includes the following:
- Recognize MAC is static (using NUD_NOARP flag) and inform BGP
- Construct MAC mobility extended community for sticky MACs as per
RFC 7432 section 15.2
- Inform to zebra that remote MAC is sticky, where appropriate
- Install sticky MACs into the kernel with the right flag
- Appropriate handling in route selection
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
Reviewed-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Implement handling of MACs and Neighbors (ARP/ND entries) in zebra:
- MAC and Neighbor database handlers
- Read MACs and Neighbors from the kernel, when needed and create
entries in zebra's MAC and Neighbor databases.
- Handle add/update/delete notifications from the kernel for MACs and
Neighbors and update zebra's database appropriately
- Inform locally learnt MACs and Neighbors to client
- Handle MACIP add/delete from client and install appriporiate entries
into the kernel
- Since Neighbor entries will be installed on an SVI, implement the
needed mappings
NOTE: kernel interface is only implemented for Linux/netlink
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Define the MAC and Neighbor (ARP/ND) data structures. These are maintained
as hash tables against the VNI. Also, define context structures used for
performing various operations on these two tables.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Implement fundamental handling for VNIs and VTEPs:
- Handle EVPN enable/disable by client (advertise-all-vni)
- Create/update/delete VNIs based on VxLAN interface events and inform
client
- Handle VTEP add/delete from client and install into kernel
- New debug command for VxLAN/EVPN
- kernel interface (Linux/netlink only)
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Define the base data structures for a VxLAN Network Identifier (VNI) and
VxLAN Tunnel End Point (VTEP). These will be used by the EVPN function.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Define interface types of interest and recognize the types. Store layer-2
information (VLAN Id, VNI etc.) for interfaces, process bridge interfaces
and map bridge members to bridge. Display all the additional information
to user (through "show interface").
Note: Only implemented for the netlink interface.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
When making improvements to error handling in this code I accidentally
introduced an off-by-one. Fix it.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Add support for naming pthreads. Also, note that we don't have any
records yet if that's the case.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
The if_update function was taking the interface name as
input and reapplying it, using strncpy to reapply the name.
This has several issues. strncpy should not be used
to copy memory in place. The second issue is that
the interface name is not actually changing when we
update interface to be in the new vrf.
Since every usage of if_update was just reapplying the same
name the interface actually had, just remove that part of
the function and rename it to if_update_to_new_vrf
to represent what it is actually doing.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
log.c provides functionality for associating a constant (typically a
protocol constant) with a string and finding the string given the
constant. However this is highly delicate code that is extremely prone
to stack overflows and off-by-one's due to requiring the developer to
always remember to update the array size constant and to do so correctly
which, as shown by example, is never a good idea.b
The original goal of this code was to try to implement lookups in O(1)
time without a linear search through the message array. Since this code
is used 99% of the time for debugs, it's worth the 5-6 additional cmp's
worst case if it means we avoid explitable bugs due to oversights...
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
- All ipv4 labeled-unicast routes are now installed in the ipv4 unicast
table. This allows us to do things like take routes from an ipv4
unicast peer, allocate a label for them and TX them to a ipv4
labeled-unicast peer. We can do the opposite where we take routes from
a labeled-unicast peer, remove the label and advertise them to an ipv4
unicast peer.
- Multipath over a labeled route and non-labeled route is not allowed.
- You cannot activate a peer for both 'ipv4 unicast' and 'ipv4
labeled-unicast'
- The 'tag' variable was overloaded for zebra's route tag feature as
well as the mpls label. I added a 'mpls_label_t mpls' variable to
avoid this. This is much cleaner but resulted in touching a lot of
code.
Switch the RB tree implementation completely to the new dlg@'s version
that uses pre-declared functions instead of macros for tree functions.
Original e-mail/diff:
https://marc.info/?l=openbsd-tech&m=147087487111068&w=2
Pros:
* Reduces the amount of code that the usage of those macros generate
* Allows the compiler to do a better compile-time check job
* Might have better i-cache utilization since the tree code is shared
Con:
* dlg@ benchmarks shows it has 'very slightly slower' insertions
* imported RB_* code must adapt the following calls:
RB_INIT(), RB_GENERATE(), RB_ROOT(), RB_EMPTY(), make compare
functions use 'const' (if not already) and maybe others.
The testzebra command was unused as well as unmaintained.
The NS and VRF changes never made into testzebra so when
you actually ran testzebra it would just crash due to
uninitialized assumptions.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Standard define the default SRGB range from 16000 to 23999. This
commit defines these default values for frr.
Ticket: CM-16737
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Reviewed-by: CCR-6347
For NHRP, EIGRP and LDP( This is for consistency as opposed to correctness )
assign some new values to routes to be installed into the kernel
so we can know who owns them later.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
it's just an alias for a millisecond timer used in exactly nine places
and serves only to complicate
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
pim controls the vrf table creation for due to the way that
pim must interact with the kernel. In order to match the
table_id for unicast <-> multicast( not necessary but a
real nice to have ) we need to pass up from zebra the
table_id associated with the vrf.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The 'struct rib' data structure is missnamed. It really
is a 'struct route_entry' as part of the 'struct route_node'.
We have 1 'struct route_entry' per route src. As such
1 route node can have multiple route entries if multiple
protocols attempt to install the same route.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Rearrange the _netlink_route_build*() functions so the labels of the
nexthops are always installed, even for IPv4 routes with IPv6 nexthops.
Fixes Labeled Unicast with BGP Unnumbered.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
the ipv4_ll address used for 5549 routes does not need
to be figured out every single time that we attempt
to install/remove a route of that type.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When zebra issues read (GET) requests to the kernel using the netlink
interface, it is incorrect to format all of them in a generic manner
using 'struct ifinfomsg' or 'struct rtgenmsg'. Rather, messages for a
particular entity (e.g., routes) should use the corresponding structure
for encoding (e.g., 'struct rtmsg'). Of course, this has to correlate
with what the kernel expects.
In the absence of this, there is the possibility of sending extraneous
information in the request which the kernel wouldn't like.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: David Ahern <dsa@cumulusnetworks.com>
Prior to the fix, labels weren't getting installed in zebra nor were the
ifindex values correctly set if labeled-unicast was used in conjunction
with bgp unnumbered.
Ticket: CM-16531
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Reviewed-by: CCR-6276
zebra_mpls_null.c should contain only dummy replacements for
platform-specific functions that may not be available on some systems
(e.g. add/delete LSPs in the kernel).
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Revert "ospf6d: fix decimal area ID cli"
commit a27cb3cfe9
Revert "bgpd: add back unicast option to 'address-family vpnv(4&6)' Issue #459"
commit 399598bf6b
Revert "Fix the memory leak"
commit d8d58e9839
Revert "zebra: 'no ip route 4.1.1.19 255.255.255.255 99' is ambiguous"
commit 83f3561935
Revert "ospf6d: Allow unconfig of unknown lsa's"
commit 5b0747d71d
Revert "Fix the "Dead assignment" of clang SA."
commit 3a6570a1f1
Revert "snapcraft: Improve README.usage.md based on feedback received"
commit 2a3a819a9c
Revert "zebra: stop deregistering static nexthops unless removing the static"
commit 1dac3a9619
All of these changes do not apply on stable/3.0 due to either CLI
changes or another fix already being present.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
All PIM Neighbors for a given pim interface is registered with
BFD.
Upon receiving BFD status down event, PIM Neighbor with BFD info is deleted.
Add pim bfd configuraiton (CLI) per interface, '[no] ip pim bfd'
Testing Done:
Configure BFD under PIM interface on all neighbor routers,
check bfd sessions up, remote end unconfigure BFD, results in BFD session down.
Previous state was UP to New state DOWN, results in PIM neighbor delete behind
that particular pim interface.
Pim-smoke Results:
Ran 94 tests in 7409.680s
FAILED (SKIP=8, failures=2)
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Problem reported was that with some overlapping static route configurations,
when the link went down the less specific static was not re-installed after
the link came back up. Determined that with the overlapping statics, we
would recursively resolve the next-hop temporarily thru the more specific
static route, but since the next-hop wasn't actually reachable, we would go
through the code that clears the nht information for the static completely.
This caused the nht code to no longer process the static route.
After reviewing the process, there doesn't seem to be any reason that the
static should be deregistered in that section of code. Removed the
deregister and the problem is resolved and not addional failures seen in
manual testing. zebra_test.py completed successfully and ospf and bgp smokes
completed with no new failures.
Ticket: CM-14873
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Reviewed-by: CCR-5696
Fix for another issue with next-hop tracking for overlapping static routes
created a problem removing the dead routes. This fix corrects that error.
Ticket: CM-13710
Signed-off-by: Don Slice
Reviewed By: Donald Sharp
Testing Done: ospf-smoke, bgp-smoke
Encountered a crash in zebra due to getting a delete on an SVI with
VRR configured. Since we don't actually do a delete but flag the interface
as inactive, slag VRR interfaces would remain on the vrf_iflist with a lock
count of zero, causing the crash. Since all other interface types are moved
to the default table before deleting, doing the same thing for any interfaces
that were left in the vrf.
Testing includes manual testing, bgp-min, ospf-min, vrf-min, bgp-smoke, and ospf-smoke.
All passed (first time or on rerun) or match known failures.
Ticket: CM-13288
Signed-off-by: Don Slice
Reviewed-by: Donald Sharp
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
Whenever you did "redistribute" zebra would kick this off for ipv4 and
ipv6. No real issue other than this is sub-optimal
We only needed to add/change the vrf callbacks when we initialize
the vrf subsystem. As such it is not necessary to handle the callbacks
in any other way than through the init function.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Segregate the vrf enable/disable functionality from other vrf
code. This is to ensure that people are not actually using
the functions when they should not be. Also document the
why of it properly in the new vrf_int.h header.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The FSF's address changed, and we had a mixture of comment styles for
the GPL file header. (The style with * at the beginning won out with
580 to 141 in existing files.)
Note: I've intentionally left intact other "variations" of the copyright
header, e.g. whether it says "Zebra", "Quagga", "FRR", or nothing.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
To avoid blocking zebra when it's acting as a proxy for an external
label manager.
Besides:
Fix get chunk reconnection. Socket was still being destroyed on failure,
so next attempt would never work.
Filter out unwanted messages in lm sync sock.
Until LDE client sends ZEBRA_LABEL_MANAGER_CONNECT message, zserv
doesn't know which kind of client it is, so it might enqueue unwanted
messages like interface add, interface up, etc. Changes in this commit
discard those messages in the client side in case they arrive before the
expected response.
Change function name for zclient_connect in label manager to avoid
confusion with zclient one.
Signed-off-by: ßingen <bingen@voltanet.io>
1) Fix the kernel send and recv hex dump of what we
are sending to the kernel
2) When configuring the debugs under 'conf t' display
it too.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
ZEBRA_FLAG_SELECTED hasn't been set yet by the time lsp_install is
called. The call path is:
rib_process -> rib_process_add_fib -> zebra_mpls_lsp_install -> lsp_install
but ZEBRA_FLAG_SELECTED is set in rib_process after it calls
rib_process_add_fib. I can't think of anything that it would hurt to
install the LSP regardless of whether ZEBRA_FLAG_SELECTED is set later.
I also cleaned up some UI (json and display the pretty label names
instead of their numeric values).
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
Pass pointer to pointer instead of assigning by return value. See
previous commit message.
To ensure that the behavior stays functionally correct, any assignments
with the result of a thread_add* function have been transformed to set
the pointer to null before passing it. These can be removed wherever the
pointer is known to already be null.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
The way thread.c is written, a caller who wishes to be able to cancel a
thread or avoid scheduling it twice must keep a reference to the thread.
Typically this is done with a long lived pointer whose value is checked
for null in order to know if the thread is currently scheduled. The
check-and-schedule idiom is so common that several wrapper macros in
thread.h existed solely to provide it.
This patch removes those macros and adds a new parameter to all
thread_add_* functions which is a pointer to the struct thread * to
store the result of a scheduling call. If the value passed is non-null,
the thread will only be scheduled if the value is null. This helps with
consistency.
A Coccinelle spatch has been used to transform code of the form:
if (t == NULL)
t = thread_add_* (...)
to the form
thread_add_* (..., &t)
The THREAD_ON macros have also been transformed to the underlying
thread.c calls.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Restore the original logic in netlink_link_change() which works like this:
* once an interface event is detected, lookup the associated interface
by its name;
* call the set_ifindex() function;
* set_ifindex() will lookup the interface again but now by its ifindex. If
the lookups by name and ifindex yield to different results, then the
interface was renamed and set_ifindex() will take care of that.
In the future, zns->if_table will be split into two different data
structures to allow faster lookups by both name and ifindex.
Fixes Issue #397.
Regression introduced by commit 12f6fb9.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
How to reproduce the bug:
% ip link add vrf-red type vrf table 10
% ip link set dev vrf-red up
% ip rule add oif vrf-red table 10
% ip rule add iif vrf-red table 10
% ip link add name lo1 type dummy
% ip link set dev lo1 up
% ip link set dev lo1 master vrf-red
% ip link del dev vrf-red
(zebra gets stuck in an infinite loop inside work_queue_run())
Regression introduced by commit 5a8dfcd8.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Add missing bits to properly unlink interface in the if_unlink_per_ns()
function.
In the long term we should convert if_table to use a more convenient
data structure like a red-black tree instead of a routing table.
Fixes issue #398.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Problem reported by a customer with prefix imported by rdnbrd not being
successfully installed in the quagga rib. Determined that this was due
to VRR resolving the same arp entry, causing two entries to be installed
in table 10. When these were imported into the quagga rib, they came in
as two different rib entries from the same table/instance, which is not
permitted and caused them to be deleted.
Added logic to zebra_add_import_table_entry to do the same actions as
rib_add and delete the older rib entry if a new rib entry is received
which matches.
Manual testing successful and automated tests for redistribute neighbor
have the same passes and failures as the base.
Ticket: CM-15926
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Reviewed-by:
Ticket: CM-14313
Reviewed By:
Testing Done: bgpmin, ospfmin, bgp_kitchen_sink_test
'ip route show' displays all routes as belonging to protocol zebra.
The user has to run an additional command (in vtysh) to get the actual
source of a route (bgp/ospf/static etc.). This patch addresses that by
pushing the appropriate protocol string into the protocol field of the
netlink route update message. Now you can see routes with the correct
origin as well as filter on them (ip route show proto ospf).
'ospf' is used for both IPv4 and IPv6 routes, even though the OSPF
version is different in both cases.
Sample output (old):
9.9.12.13 via 69.254.2.38 dev swp3.2 proto zebra metric 20
9.9.13.3 proto zebra metric 20
nexthop via 69.254.2.30 dev swp1.2 weight 1
nexthop via 69.254.2.34 dev swp2.2 weight 1
nexthop via 69.254.2.38 dev swp3.2 weight 1
Sample output (new):
9.9.12.13 via 69.254.2.38 dev swp3.2 proto bgp metric 20
9.9.13.3 proto bgp metric 20
nexthop via 69.254.2.30 dev swp1.2 weight 1
nexthop via 69.254.2.34 dev swp2.2 weight 1
nexthop via 69.254.2.38 dev swp3.2 weight 1
Problem reported that crash occurred when stopping quagga in certain
circumstances. Determined that this was due to a stale pointer on the
ifp for a deleted interface. The ifp->node had been freed but the ifp
still kept a pointer to it, and when later the process was stopped, it
attempted to delete it again.
Ticket: CM-15550
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Be a bit more rigoruous about what we can receive
from another protocol and attempt to make the code
less likely to crash and to just safely bail
out when an error is received.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
We only create the v4 and v6 mpls fec tables currently.
Follow the code pattern for the rest of the code and
ensure that the table exists before we attempt to access it.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The build system for mpls is a bit convoluted. We need
a way to handle builds across multiple platforms. This,
I believe addresses this issue.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
flags is set but never used. Since we
plan to use it in the future, make
it evident what is going on here.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Implement BGP Prefix-SID IETF draft to be able to signal a labeled-unicast
prefix with a label index (segment ID). This makes it easier to deploy
global MPLS labels with BGP, even without other aspects of Segment Routing
implemented.
This patch implements the handling of the BGP-Prefix-SID Label Index
attribute. When received from a peer and the index is acceptable, the local
label is picked up from the SRGB and is programmed as the incoming label as
well as advertised to peers. If the index is not acceptable, no local label
is assigned. The outgoing label will always be the one advertised by the
downstream neighbor.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Implement BGP Prefix-SID IETF draft to be able to signal a labeled-unicast
prefix with a label index (segment ID). This makes it easier to deploy
global MPLS labels with BGP, even without other aspects of Segment Routing
implemented.
This patch implements configuration of the global label block (SRGB) and
configuration of a label-index for a network in BGP.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
