clear ip ospf interface <IFNAME> parsing issue,
instead of arguement of interface "IFNAME" parsed.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
ospf timers related commands under router ospf were not accepted
due to incorrect argument count check.
timers throttle lsa all (0-5000)
timers throttle spf (0-600000) (0-600000) (0-600000)
timers lsa arrival (0-1000)
timers lsa min-arrival (0-600000)
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
If you are not using OSPF-TE than there is no need to
be warned that we cannot find anything about it.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
If the user enters a decimal, display a decimal.
If the user enters a dotted quad, display a dotted quad.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Revert "ospf6d: fix decimal area ID cli"
commit a27cb3cfe9
Revert "bgpd: add back unicast option to 'address-family vpnv(4&6)' Issue #459"
commit 399598bf6b
Revert "Fix the memory leak"
commit d8d58e9839
Revert "zebra: 'no ip route 4.1.1.19 255.255.255.255 99' is ambiguous"
commit 83f3561935
Revert "ospf6d: Allow unconfig of unknown lsa's"
commit 5b0747d71d
Revert "Fix the "Dead assignment" of clang SA."
commit 3a6570a1f1
Revert "snapcraft: Improve README.usage.md based on feedback received"
commit 2a3a819a9c
Revert "zebra: stop deregistering static nexthops unless removing the static"
commit 1dac3a9619
All of these changes do not apply on stable/3.0 due to either CLI
changes or another fix already being present.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
When you have more than one ospf interface configured
to be used, we were attempting to reuse the
json_interface_sub pointer after we added it
to the json data structure.
Ticket: CM-13597
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
We only needed to add/change the vrf callbacks when we initialize
the vrf subsystem. As such it is not necessary to handle the callbacks
in any other way than through the init function.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The FSF's address changed, and we had a mixture of comment styles for
the GPL file header. (The style with * at the beginning won out with
580 to 141 in existing files.)
Note: I've intentionally left intact other "variations" of the copyright
header, e.g. whether it says "Zebra", "Quagga", "FRR", or nothing.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Pass pointer to pointer instead of assigning by return value. See
previous commit message.
To ensure that the behavior stays functionally correct, any assignments
with the result of a thread_add* function have been transformed to set
the pointer to null before passing it. These can be removed wherever the
pointer is known to already be null.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
The way thread.c is written, a caller who wishes to be able to cancel a
thread or avoid scheduling it twice must keep a reference to the thread.
Typically this is done with a long lived pointer whose value is checked
for null in order to know if the thread is currently scheduled. The
check-and-schedule idiom is so common that several wrapper macros in
thread.h existed solely to provide it.
This patch removes those macros and adds a new parameter to all
thread_add_* functions which is a pointer to the struct thread * to
store the result of a scheduling call. If the value passed is non-null,
the thread will only be scheduled if the value is null. This helps with
consistency.
A Coccinelle spatch has been used to transform code of the form:
if (t == NULL)
t = thread_add_* (...)
to the form
thread_add_* (..., &t)
The THREAD_ON macros have also been transformed to the underlying
thread.c calls.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Fixed output:
robot.cumulusnetworks.com# show ip ospf int
enp0s3 is up
ifindex 2, MTU 1500 bytes, BW 0 Mbit <UP,BROADCAST,RUNNING,MULTICAST>
Internet Address 10.0.2.15/24, Broadcast 10.0.2.255, Area 0.0.0.0
MTU mismatch detection:enabled
Router ID 192.168.0.1, Network Type BROADCAST, Cost: 10
Transmit Delay is 1 sec, State Waiting, Priority 1
No backup designated router on this network
Multicast group memberships: OSPFAllRouters
Timer intervals configured, Hello 10s, Dead 40s, Wait 40s, Retransmit 5
Hello due in 9.611s
Neighbor Count is 0, Adjacent neighbor count is 0
enp0s10 is up
ifindex 7, MTU 1500 bytes, BW 0 Mbit <UP,BROADCAST,RUNNING,MULTICAST>
Internet Address 192.168.201.146/24, Broadcast 192.168.201.255, Area 0.0.0.0
MTU mismatch detection:enabled
Router ID 192.168.0.1, Network Type BROADCAST, Cost: 10
Transmit Delay is 1 sec, State Waiting, Priority 1
No backup designated router on this network
Multicast group memberships: OSPFAllRouters
Timer intervals configured, Hello 10s, Dead 40s, Wait 40s, Retransmit 5
Hello due in 7.241s
Neighbor Count is 0, Adjacent neighbor count is 0
robot.cumulusnetworks.com# show ip ospf int enp0s3
enp0s3 is up
ifindex 2, MTU 1500 bytes, BW 0 Mbit <UP,BROADCAST,RUNNING,MULTICAST>
Internet Address 10.0.2.15/24, Broadcast 10.0.2.255, Area 0.0.0.0
MTU mismatch detection:enabled
Router ID 192.168.0.1, Network Type BROADCAST, Cost: 10
Transmit Delay is 1 sec, State Waiting, Priority 1
No backup designated router on this network
Multicast group memberships: OSPFAllRouters
Timer intervals configured, Hello 10s, Dead 40s, Wait 40s, Retransmit 5
Hello due in 2.915s
Neighbor Count is 0, Adjacent neighbor count is 0
robot.cumulusnetworks.com# show ip ospf int enp0s10 json
{
"enp0s10":{
"ifUp":true,
"ifIndex":7,
"mtuBytes":1500,
"bandwidthMbit":0,
"ifFlags":"<UP,BROADCAST,RUNNING,MULTICAST>",
"ospfEnabled":true,
"ipAddress":"192.168.201.146",
"ipAddressPrefixlen":24,
"ospfIfType":"Broadcast",
"localIfUsed":"192.168.201.255",
"area":"0.0.0.0",
"routerId":"192.168.0.1",
"networkType":"BROADCAST",
"cost":10,
"transmitDelayMsecs":1000,
"state":"Waiting",
"priority":1,
"mcastMemberOspfAllRouters":true,
"timerMsecs":100,
"timerDeadMsecs":25,
"timerWaitMsecs":25,
"timerRetransmit":200,
"timerHelloInMsecs":2106,
"nbrCount":0,
"nbrAdjacentCount":0
}
}
robot.cumulusnetworks.com#
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The SNMP modules include <net-snmp/net-snmp-config.h>, which won't be
found in off-searchpath directories without SNMP_CFLAGS. Unfortunately
in my tests the files were on the search path even without the flags.
(SNMP_LIBS is not needed because only libfrrsnmp calls into net-snmp
functions.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
OSPF distance commands were broken in a variety of ways. Fix 'em.
* `distance ospf` and `distance ospf6` were accepted commands
* Inconsistent doc strings
* Make use of {keyword|tokens}
* Add ability to reset specific distance without specifying a value
Ex: ~# no distance ospf6 intra
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
These have copies in vtysh that do the node-switch locally and are
listed in extract.pl's ignore list. The ignore list however is
redundant since DEFUN_NOSH does the same thing...
ldpd is a bit hacky, but Renato is reworking this anyway.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This means there are no ties into the SNMP code anymore other than the
init call at startup.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
There were some typos in command line help, also the "e:" spec was
missing for getopt in zebra/bgpd (even before the refactor).
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Contains the fetch-and-run-thread logic, and vty startup (which is the
last thing happening before entering the main loop).
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Centralise read_config/daemonize/dryrun/pidfile/vty_serv into libfrr.
This also makes multi-instance pid/config handling available as part of
the library. It's only wired up in ospfd, but the code is in lib/.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Start centralising startup & option parsing into the library.
FRR_DAEMON_INFO is a bit weird, but it will become useful later (e.g.
for killing the ZLOG_* enum, and having the daemon name available)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Coverity: string_overflow: You might overrun the 100-character destination string vty_path by writing 4096 characters from vty_sock_path.
Signed-off-by: Martin Winter <mwinter@opensourcerouting.org>
Coverity: buffer_size_warning: Calling strncpy with a maximum size argument of 100 bytes on destination array pid_file of size 100 bytes might leave the destination string unterminated.
Signed-off-by: Martin Winter <mwinter@opensourcerouting.org>
There's no point in installing libospf anymore, now that
libfrrospfclient doesn't link it.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
The OSPF API-client library doesn't really use anything from libospf
except some small dumping tools. Isolate these into a separate file
and detangle the ospfapiclient library.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Convert the libospfapiclient -> libfrrospfapiclient
and libospf -> libfrrospf to prevent namespace
collision with Quagga.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The library libzebra that is installed with FRR will
conflict with Quagga. So let's rename it to libfrr.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Somewhere in the past we switched from
using the auto-generated redistribute statements
to a non-generated version. This caused us to
loose new protocols to redistribute as they are
added. Put it back.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
monotime_since() does exactly the same thing.
... and timeval_elapsed is now private to lib/thread.c
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This ditches tv_add, tv_sub, tv_cmp, etc. in favour of
monotime{,_since,_until}() which actually makes the code much more
readable in some locations.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Conflicts (CLI vs. atol()):
- bgpd/bgp_vty.c
- ospfd/ospf_vty.c
- zebra/zebra_vty.c
NB: pull req #65 (LabNConsulting/working/2.0/afi-safi-vty/c) was
excluded from this merge.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
When unconfiguring certain commands in ospf, you can
run into situations where we attempt to read beyond
the end of a argv[] vector created. On certain platforms
this will crash it.
Ticket: CM-14090
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
* lib/if.h: Remove LP_TE as Link Parameters is set if different from 0
See IS_LINK_PARAMS_SET macro and use LP_TE_METRIC to determine if TE metric
is set or not
* lib/if.c: replace LP_TE by LP_TE_METRIC in default LP status
* zebra/interface.c: replace LP_TE by LP_TE_METRIC and check if TE metric
is equal to standard metric or not
* ospfd/ospf_te.c: replace LP_TE by LP_TE_METRIC
* isisd/isis_te.c: replace LP_TE by LP_TE_METRIC
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
All of the autogenerated macros in lib/route_types.pl are now called
FRR_* instead of QUAGGA_*.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Several places have paths and names that can change hardcoded, e.g. the
package name and the /var/run path. This fixes a few of them, there's
still some to do.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This replaces Quagga -> FRR in most configure.ac settings as well as
a handful of preprocessor macros in the source code.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
VTY_DECLVAR_CONTEXT already contains a NULL check, vty warning message
and return statement. These are not needed.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Fix instances that the coccinelle patch didn't catch (or which
coccinelle couldn't parse), and add the patch file for future posterity
(and application to yet-unmerged branches).
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
If we fail to set any socket's buffer size, try again with a smaller value
and keep going until it succeeds. This is better than just giving up or,
even worse, abort the creation of a socket (ospf6d and ripd).
Fix broken ospf6d on FreeBSD.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This reverts commit b7fe4141, which introduced a logic where the OSPF
send buffer size was dynamically updated to reflect the maximum MTU
of the OSPF enabled interfaces (this was done to make ospfd work with
interfaces configured for jumbo frames).
Since commit a78d75b0, this is not necessary anymore because
ospf_sock_init() now sets the OSPF send buffer size to a very high value
(8MB). Also, the previous logic was broken because it didn't account
for run-time interface MTU changes.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
These now generate warnings which will break the build with -Werror.
Note this may have enabled commands that should be disabled, or the
other way around...
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
When nbr->t_inactivity is not active, and
you do a show json over the neighbor it
will crash ospfd. Fix the code so it
prints out -1 when the timer is inactive.
Ticket:CM-13835
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Don Slice <dslice@cumulusnetworks.com>
Reviewed-by: Daniel Walton <dwalton@cumulusnetworks.com>
(cherry picked from commit 78d8fcb9623ab4d9cebf6187a451448e056a84bf)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This moves all install_element calls into the file where the DEFUNs are
located. This fixes several small related bugs:
- ospf6d wasn't installing a "no interface FOO" command
- zebra had a useless copy of "interface FOO"
- pimd's copy of "interface FOO" was not setting qobj_index, which means
"description LINE" commands would fail with an error
The next commit will do the actual act of making "foo_cmd" static.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
When doing a show command under ospf, if
not using json we would have a small memory
leak in show_ip_ospf_common.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
(cherry picked from commit 50750712b1ac8364e290c67782eaf371025dc59e)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Additionally:
* Add [ip] to a couple bgp show commands
* Quick refactor of a couple ISIS commands
* Quick refactor of a couple OSPF6 commands
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Ticket: CM-13712
(cherry picked from commit 367b138748e894bbfaae36d1cf7c90eafebfebc9)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Nice clang catch: ospfd/ospf_vty.c:6710:1: error: all paths through
this function will call itself [-Werror,-Winfinite-recursion]
(same in vtysh/vtysh.c)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
We can't use if_lookup_prefix() in rip_update_process() because this
function uses prefix_cmp() internally to try matching an interface
address to a static neighbor's address.
Since prefix_cmp() tries to match exact prefixes, if_lookup_prefix()
was always returning NULL.
What we really need here is to use prefix_match(), which checks if
one prefix includes the other (e.g. one /24 interface including a /32
static neighbor's address). The fix then is to replace the call to
if_lookup_prefix() and use if_lookup_address() instead, which uses
prefix_match() internally.
Fixes IxANVL RIP test 17.1
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Refactor a bunch of commands.
* Make hidden configuration items consistent
* Remove duplicate code
* Make unconfig consistent with config
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
When ospf RI commands are entered and we have not turned
on the feature, gracefully tell the user that there is
no going forward.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
If ospf mpls-te has not been turned on via a 'mpls-te on'
dissallow other mpls-te commands from being silently accepted
and ignored.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Acked-by: Donald Sharp <sharpd@cumulusnetworks.com>
Consolidate the routemap initialization into one
function.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Daniel Walton <dwalton@cumulusnetworks.com>
If a command is put into the VIEW_NODE, it is going into the
ENABLE_NODE as well. This is especially true for show commands.
As such if a command is in both consolidate it down to VIEW_NODE.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This patch improves zebra,ripd,ripngd,ospfd and bgpd so that they can
make use of 32-bit route tags in the case of zebra,ospf,bgp or 16-bit
route-tags in the case of ripd,ripngd.
It is based on the following patch:
commit d25764028829a3a30cdbabe85f32408a63cccadf
Author: Paul Jakma <paul.jakma@hpe.com>
Date: Fri Jul 1 14:23:45 2016 +0100
*: Widen width of Zserv routing tag field.
But also contains the changes which make this actually useful for all
the daemons.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Problem reported that no peers are displayed when the command "show
ip ospf neighbor detail all" is entered. Determined that the problem
was actually that the function only displayed NBMA peers, and since
we rarely (if ever) define NBMA peers, nothing is normally displayed.
Changed the code to display both NBMA and non-NBMA peers, in both the
up and down state. Manual testing attached to the jira ticket.
Ticket: CM-5878
Signed-off-by: Don Slice
Reviewed-by: Daniel Walton
* zclient.c: prefix length on router-id and interface address add
messages not sanity checked. fix.
* */*_zebra.c: Prefix length on zebra route read was not checked, and
clients use it to write to storage. An evil zebra could overflow
client structures by sending overly long prefixlen.
Prompted by discussions with:
Donald Sharp <sharpd@cumulusnetworks.com>
Since recently zebra uses only the ZEBRA_REDISTRIBUTE_* messages
to advertise redistributed routes to its clientes. Now the old
ZEBRA_IPV*_ROUTE_* messages are only used for client->zebra communication.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
The new TE functions will always print out a warning
that TE has not been configured on an interface. This
should be a debug not a warn.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This is a rather large mechanical commit that splits up the memory types
defined in lib/memtypes.c and distributes them into *_memory.[ch] files
in the individual daemons.
The zebra change is slightly annoying because there is no nice place to
put the #include "zebra_memory.h" statement.
bgpd, ospf6d, isisd and some tests were reusing MTYPEs defined in the
library for its own use. This is bad practice and would break when the
memtype are made static.
Acked-by: Vincent JARDIN <vincent.jardin@6wind.com>
Acked-by: Donald Sharp <sharpd@cumulusnetworks.com>
[CF: rebased for cmaster-next]
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Move over to the new allocation counting added in the previous commit.
(This commit is mostly mechanical.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Acked-by: Vincent JARDIN <vincent.jardin@6wind.com>
Entering 'show ip ospf interface json' causes ospf
to crash.
Entering 'show ip ospf interface <intf> json' causes
ospf to crash if intf has no neighbors on the otherside
Modify the code to not crash in these cases.
Ticket: CM-12776
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Daniel Walton <dwalton@cumulusnetworks.com>
Entering 'show ip ospf interface json' causes ospf
to crash.
Entering 'show ip ospf interface <intf> json' causes
ospf to crash if intf has no neighbors on the otherside
Modify the code to not crash in these cases.
Ticket: CM-12776
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Daniel Walton <dwalton@cumulusnetworks.com>
This is an implementation of RFC4970 (Router Information) and
RFC5088 (PCE Capabilities announcement)
* ospfd/Makefile.am: Add new file ospf_ri.c and ospf_ri.h
* ospfd/ospf_opaque.c: Add new Router Capabilities code point
* ospfd/ospf_ri.[c,h]: Implementation of RFC4970 & RFC5088
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
NOTE: I am squashing several commits together because they
do not independently compile and we need this ability to
do any type of sane testing on the patches. Since this
series builds together I am doing this. -DBS
This new structure is the basis to get new link parameters for
Traffic Engineering from Zebra/interface layer to OSPFD and ISISD
for the support of Traffic Engineering
* lib/if.[c,h]: link parameters struture and get/set functions
* lib/command.[c,h]: creation of a new link-node
* lib/zclient.[c,h]: modification to the ZBUS message to convey the
link parameters structure
* lib/zebra.h: New ZBUS message
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
Add support for IEEE 754 format
* lib/stream.[c,h]: Add stream_get{f,d} and stream_put{f,d}) demux and muxers to
safely convert between big-endian IEEE-754 single and double binary
format, as used in IETF RFCs, and C99. Implementation depends on host
using __STDC_IEC_559__, which should be everything we care about. Should
correctly error out otherwise.
* lib/network.[c,h]: Add ntohf and htonf converter
* lib/memtypes.c: Add new memeory type for Traffic Engineering support
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
Add link parameters support to Zebra
* zebra/interface.c:
- Add new link-params CLI commands
- Add new functions to set/get link parameters for interface
* zebra/redistribute.[c,h]: Add new function to propagate link parameters
to routing daemon (essentially OSPFD and ISISD) for Traffic Engineering.
* zebra/redistribute_null.c: Add new function
zebra_interface_parameters_update()
* zebra/zserv.[c,h]: Add new functions to send link parameters
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
Add support of new link-params CLI to vtysh
In vtysh_config.c/vtysh_config_parse_line(), it is not possible to continue
to use the ordered version for adding line i.e. config_add_line_uniq() to print
Interface CLI commands as it completely break the new LINK_PARAMS_NODE.
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
Update Traffic Engineering support for OSPFD
These patches update original code to RFC3630 (OSPF-TE) and add support of
RFC5392 (Inter-AS v2) & RFC7471 (TE metric extensions) and partial support
of RFC6827 (ASON - GMPLS).
* ospfd/ospf_dump.[c,h]: Add new dump functions for Traffic Engineering
* ospfd/ospf_opaque.[c,h]: Add new TLV code points for RFC5392
* ospfd/ospf_packet.c: Update checking of OSPF_OPTION
* ospfd/ospf_vty.[c,h]: Update ospf_str2area_id
* ospfd/ospf_zebra.c: Add new function ospf_interface_link_params() to get
Link Parameters information from the interface to populate Traffic Engineering
metrics
* ospfd/ospfd.[c,h]: Update OSPF_OPTION flags (T -> MT and new DN)
* ospfd/ospf_te.[c,h]: Major modifications to update the code to new
link parameters structure and new RFCs
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
tmp
Use the 'enum nexthop_types_t' instead of
the zebra.h #defines. And remove code from
zebra.h that does not belong there.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Daniel Walton <dwalton@cumulusnetworks.com>
Use with interface command:
interface ppp0
ip ospf area 0.0.0.0
This will enable OSPF on ppp0 with area 0.0.0.0
Remove with "no ip ospf area"
* ospf_vty.c: add "ip ospf area (A.B.C.D|<0-4294967295>)" interface command
* ospfd.c: (ospf_interface_{un,}set) new helper function to enable/disable
OSPF on a specific interface.
(ospf_if_update) 2 possible paths now to deal with interface updates.
Acked-by: Donald Sharp <sharpd@cumulusnetworks.com>
[DL: this restores the tree to deccaf9...]
This reverts commit e723861da1.
The code is from Joakim Tjernlund; this is just to fix the history (and
attribution) of it. The last commit will restore the exact same tree
state.
THIS COMMIT WILL PROBABLY NOT COMPILE.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Remove from ospf the HAVE_OSPF_TE define and just always have
ospf traffic engineering.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Tested-by: NetDEF CI System <cisystem@netdef.org>
(cherry picked from commit 693da6096a28eef5eadeea699771265987b3ec0c)
HAVE_OPAQUE_LSA is used by default and you have to actively turn it off
except that OPAQUE_LSA is an industry standard and used pretty much
everywhere. There is no need to have special #defines for this anymore.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
(cherry picked from commit 36fef5708d074a3ef41f34d324c309c45bae119b)
OpenBSD doesn't support the "ifindex hack" derived from RFC 1724 which
allows an ifindex to be encoded in the imr_interface field (in_addr)
of the ip_mreq structure. OpenBSD also doesn't support the RFC3678
Protocol-Independent socket API extensions, which allows an interface
to be specified by its ifindex. With that said, in OpenBSD we still need
to specify an interface by its IP address. This patch adds an exception
in the multicast sockopt functions to handle this case.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
A few places are using 0 in place of the MTYPE_* argument. The
following rewrite of the alloc tracking won't deal with that, so let's
use MTYPE_TMP instead.
Acked-by: Vincent JARDIN <vincent.jardin@6wind.com>
Acked-by: Donald Sharp <sharpd@cumulusnetworks.com>
[DL: v2: fix XFREE(0, foo) calls too]
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Make it easier to see which bits in *_snmp.c are actually referenced
from non-SNMP parts of the code.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
While the idea for this came the other way around - removing
quagga_time() - using random() is actually a better idea here. It's
seeded by time to begin with, but if ospfd restarts several times in a
short timespan it won't run straight into the same sequence number.
(Should also update the random seed to include microseconds so restarts
within a second use a different seq#)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
The ctime/mtime fields in ospf_route and start_time field in ospf_master
are written but never read, thus entirely useless. Remove them.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
