Two things:
1) Some advanced 'show ip ospf database'... code
was not working properly. Fix the cli to handle
this appropriately
2) Consolidate two cli functions into one.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworkscom>
Several changes were made from the original patch to resolve conflicts
and also to fix various issues that were discovered during testing. Below
is the original commit message minus a few parts that correspond to code
that was dropped during bug fixing.
Signed-off-by: Jafar Al-Gharaibeh <jafar@atcorp.com>
ospfd: Extend 'ip ospf area' to take address argument + rationalise ospf enable
* ospfd.c: (general) Clean up the whole running of OSPF on interfaces.
(add_ospf_interface) taking (struct interface *) arg is pointless here.
(ospf_is_ready) new helper.
(ospf_network_run_subnet) Put all the code for choosing whether to enable
OSPF on a subnet, and if so which area configuration to use, here. If a
subnet should not be enabled, ensure an existing oi is freed.
(ospf_network_run_interface) Just call run_subnet for all subnets on an
interface.
(ospf_network_run) Just call run_interface for all interfaces.
(ospf_if_update) Just call run_interface for the given interface.
(ospf_network_unset) Just call run_subnet for existing ois.
(ospf_update_interface_area) helper: update area on an oi, or create it.
(ospf_interface_set) renamed to ospf_interface_area_set for clarity.
Ensures OSPF is created, then into if_update.
(ospf_interface_unset) renamed to ospf_interface_area_unset and collapses
down to simple loop to call run_subnet for all ois.
* ospf_interface.h: add a more general OSPF_IF_PARAM_IS_SET, which does the
right thing and takes default config into account.
* doc/ospfd.texi: add 'ip ospf area' command.
Acked-by: Donald Sharp <sharpd@cumulusnetworks.com>
This patch has been part of Quagga since October 2015
Orignial Author: Paul Jakma <paul@quagga.net>
Date: Thu Aug 27 16:51:42 2009 +0100
log.c provides functionality for associating a constant (typically a
protocol constant) with a string and finding the string given the
constant. However this is highly delicate code that is extremely prone
to stack overflows and off-by-one's due to requiring the developer to
always remember to update the array size constant and to do so correctly
which, as shown by example, is never a good idea.b
The original goal of this code was to try to implement lookups in O(1)
time without a linear search through the message array. Since this code
is used 99% of the time for debugs, it's worth the 5-6 additional cmp's
worst case if it means we avoid explitable bugs due to oversights...
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
if bandwidth is not set from Zebra use speed as bandwidth
for ospf route.
Testing Done:
Verfied over bond which has aggregated speed of all member interfaces,
cost is reflected in ospf route and ip route.
Manually changed interface bandwidth which replaces speed as bw, instead
uses cli entered value as bw, verifid output of ospf route and ip route.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
clear ip ospf interface <IFNAME> parsing issue,
instead of arguement of interface "IFNAME" parsed.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
ospf timers related commands under router ospf were not accepted
due to incorrect argument count check.
timers throttle lsa all (0-5000)
timers throttle spf (0-600000) (0-600000) (0-600000)
timers lsa arrival (0-1000)
timers lsa min-arrival (0-600000)
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
If the user enters a decimal, display a decimal.
If the user enters a dotted quad, display a dotted quad.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Revert "ospf6d: fix decimal area ID cli"
commit a27cb3cfe9
Revert "bgpd: add back unicast option to 'address-family vpnv(4&6)' Issue #459"
commit 399598bf6b
Revert "Fix the memory leak"
commit d8d58e9839
Revert "zebra: 'no ip route 4.1.1.19 255.255.255.255 99' is ambiguous"
commit 83f3561935
Revert "ospf6d: Allow unconfig of unknown lsa's"
commit 5b0747d71d
Revert "Fix the "Dead assignment" of clang SA."
commit 3a6570a1f1
Revert "snapcraft: Improve README.usage.md based on feedback received"
commit 2a3a819a9c
Revert "zebra: stop deregistering static nexthops unless removing the static"
commit 1dac3a9619
All of these changes do not apply on stable/3.0 due to either CLI
changes or another fix already being present.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
When you have more than one ospf interface configured
to be used, we were attempting to reuse the
json_interface_sub pointer after we added it
to the json data structure.
Ticket: CM-13597
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The FSF's address changed, and we had a mixture of comment styles for
the GPL file header. (The style with * at the beginning won out with
580 to 141 in existing files.)
Note: I've intentionally left intact other "variations" of the copyright
header, e.g. whether it says "Zebra", "Quagga", "FRR", or nothing.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Fixed output:
robot.cumulusnetworks.com# show ip ospf int
enp0s3 is up
ifindex 2, MTU 1500 bytes, BW 0 Mbit <UP,BROADCAST,RUNNING,MULTICAST>
Internet Address 10.0.2.15/24, Broadcast 10.0.2.255, Area 0.0.0.0
MTU mismatch detection:enabled
Router ID 192.168.0.1, Network Type BROADCAST, Cost: 10
Transmit Delay is 1 sec, State Waiting, Priority 1
No backup designated router on this network
Multicast group memberships: OSPFAllRouters
Timer intervals configured, Hello 10s, Dead 40s, Wait 40s, Retransmit 5
Hello due in 9.611s
Neighbor Count is 0, Adjacent neighbor count is 0
enp0s10 is up
ifindex 7, MTU 1500 bytes, BW 0 Mbit <UP,BROADCAST,RUNNING,MULTICAST>
Internet Address 192.168.201.146/24, Broadcast 192.168.201.255, Area 0.0.0.0
MTU mismatch detection:enabled
Router ID 192.168.0.1, Network Type BROADCAST, Cost: 10
Transmit Delay is 1 sec, State Waiting, Priority 1
No backup designated router on this network
Multicast group memberships: OSPFAllRouters
Timer intervals configured, Hello 10s, Dead 40s, Wait 40s, Retransmit 5
Hello due in 7.241s
Neighbor Count is 0, Adjacent neighbor count is 0
robot.cumulusnetworks.com# show ip ospf int enp0s3
enp0s3 is up
ifindex 2, MTU 1500 bytes, BW 0 Mbit <UP,BROADCAST,RUNNING,MULTICAST>
Internet Address 10.0.2.15/24, Broadcast 10.0.2.255, Area 0.0.0.0
MTU mismatch detection:enabled
Router ID 192.168.0.1, Network Type BROADCAST, Cost: 10
Transmit Delay is 1 sec, State Waiting, Priority 1
No backup designated router on this network
Multicast group memberships: OSPFAllRouters
Timer intervals configured, Hello 10s, Dead 40s, Wait 40s, Retransmit 5
Hello due in 2.915s
Neighbor Count is 0, Adjacent neighbor count is 0
robot.cumulusnetworks.com# show ip ospf int enp0s10 json
{
"enp0s10":{
"ifUp":true,
"ifIndex":7,
"mtuBytes":1500,
"bandwidthMbit":0,
"ifFlags":"<UP,BROADCAST,RUNNING,MULTICAST>",
"ospfEnabled":true,
"ipAddress":"192.168.201.146",
"ipAddressPrefixlen":24,
"ospfIfType":"Broadcast",
"localIfUsed":"192.168.201.255",
"area":"0.0.0.0",
"routerId":"192.168.0.1",
"networkType":"BROADCAST",
"cost":10,
"transmitDelayMsecs":1000,
"state":"Waiting",
"priority":1,
"mcastMemberOspfAllRouters":true,
"timerMsecs":100,
"timerDeadMsecs":25,
"timerWaitMsecs":25,
"timerRetransmit":200,
"timerHelloInMsecs":2106,
"nbrCount":0,
"nbrAdjacentCount":0
}
}
robot.cumulusnetworks.com#
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
OSPF distance commands were broken in a variety of ways. Fix 'em.
* `distance ospf` and `distance ospf6` were accepted commands
* Inconsistent doc strings
* Make use of {keyword|tokens}
* Add ability to reset specific distance without specifying a value
Ex: ~# no distance ospf6 intra
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
These have copies in vtysh that do the node-switch locally and are
listed in extract.pl's ignore list. The ignore list however is
redundant since DEFUN_NOSH does the same thing...
ldpd is a bit hacky, but Renato is reworking this anyway.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
