Speedup (large topo): OLD: ~6 minutes NEW: ~1 second
(when paired with generate_support_bundle.py changes)
- Collect from each node in parallel
Bug fixes:
- sub-directory test name was the same internal pytest function name
for any test, and not the actual test name.
Signed-off-by: Christian Hopps <chopps@labn.net>
On a loaded machine running FRR with ASAN I've got the following result:
INFO: waiting MSDP connection from peer 10.254.254.3 on router r1
INFO: 'router_json_cmp' polling started (interval 1 secs, maximum 30 tries)
INFO: 'router_json_cmp' succeeded after 22.53 seconds
Which is very close to the limit, so lets bump the value 4x to avoid a
test false positive.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
This python fixture was way too complex for what is needed.
Eliminate gratuitous options/over-engineering:
- Change from non-deterministic `wait` and `attempts` to a single
`retry_timeout` value. This is both more deterministic, as well as
what the user should actually be thinking about.
- Use a fixed 2 second pause between executing the wrapped function
rather than a bunch of arbitrary choices of 2, 3 and 4 seconds
spread all over the test code.
- Get rid of the multiple variables for determining what "Positive" and
"Negative" results are. Instead just implement what all the user code
already wants, i.e., boolean False or a str (errormsg) means
"Negative" result otherwise it's a "Positive" result.
- As part of the above the inversion logic is much more comprehensible
in the fixture code (and more correct to boot).
Signed-off-by: Christian Hopps <chopps@labn.net>
Pylint cleanup in commit 914faab594 removed a crucial function
parameter that inverted the logic of verify function calls.
Signed-off-by: Christian Hopps <chopps@labn.net>
Modify both the default and vrf ospf6 topologies to include a test
where write-multiplier is configured to a non-default value and
the ospf6 neighbors are reset then checked.
Run black on both test files.
Signed-off-by: Pat Ruddy <pat@voltanet.io>
Currently, the dynamic hostname cache is global. It is incorrect because
neighbors in different VRFs may have the same system ID and different
hostnames.
This also fixes a memory leak - when the instance is deleted, the cache
must be cleaned up and the cleanup thread must be cancelled.
Fixes#8832.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
ospf6d (and all other daemons except zebra) doesn't correctly process
`interface X vrf Y`, because it doesn't know existing VRFs at the time
of configuration file reading. Therefore it doesn't apply configuration
provided in the interface node.
Fix the problem by removing `vrf Y` part, having just an interface name
is enough.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Add a terse option to show bgp summary to shorten output.
Do not show the following information about the BGP
instances: the number of RIB entries, the table version and the used memory.
The "terse" option can be used in combination with the "remote-as", "neighbor",
"failed" and "established" filters, and with the "wide" option as well.
Before patch:
ubuntu# show bgp summary remote-as 123456
IPv4 Unicast Summary (VRF default):
BGP router identifier X.X.X.X, local AS number XXX vrf-id 0
BGP table version 0
RIB entries 3, using 552 bytes of memory
Peers 5, using 3635 KiB of memory
Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd PfxSnt Desc
10.200.200.2 4 123456 81432 4 0 56092 0 00:00:13 572106 0 N/A
Displayed neighbors 1
Total number of neighbors 4
IPv6 Unicast Summary (VRF default):
BGP router identifier X.X.X.X, local AS number XXX vrf-id 0
BGP table version 0
RIB entries 3, using 552 bytes of memory
Peers 5, using 3635 KiB of memory
Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd PfxSnt Desc
% No matching neighbor
Total number of neighbors 5
After patch:
ubuntu# show bgp summary remote-as 123456 terse
IPv4 Unicast Summary (VRF default):
BGP router identifier X.X.X.X, local AS number XXX vrf-id 0
Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd PfxSnt Desc
10.200.200.2 4 123456 81432 4 0 56092 0 00:00:13 572106 0 N/A
Displayed neighbors 1
Total number of neighbors 4
IPv6 Unicast Summary (VRF default):
BGP router identifier X.X.X.X, local AS number XXX vrf-id 1
% No matching neighbor
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
When filtering sessions on show bgp summary with failed, established,
neighbor and remote-as options, add a counter of displayed neighbors
in addition to the total number of neighbor :
"Displayed neighbors X"
ubuntu# show bgp summary failed remote-as external
IPv4 Unicast Summary (VRF default):
Neighbor EstdCnt DropCnt ResetTime Reason
10.200.200.2 0 0 never Waiting for NHT
172.16.29.2 0 0 never Waiting for NHT
10.22.1.2 0 0 never Waiting for NHT
Displayed neighbors 3
Total number of neighbors 5
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
