Implement all BFD integration northbound callbacks and integrate BFD
with `staticd` route installation procedure.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
When compiling with -fsanitize=thread. I started getting this error:
staticd/static_zebra.c: In function ‘static_zebra_nht_get_prefix’:
staticd/static_zebra.c:316:1: error: control reaches end of non-void function [-Werror=return-type]
316 | }
| ^
Just to make future efforts still work, let's just make the compiler happy.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Other VRFs get VRF_ADD notifications from zebra which triggers
static_fixup_vrf_ids, but since the default VRF is implicit we need to
make that same call on connect.
This should fix problems with staticd being started before (or
concurrent with and thus racing) zebra.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
nh_update is only called in two places and both precede a matching
follow-up nht_register call. Fold the update into register, and make
register do the right thing™ for all cases (i.e. update refcounts as
needed, and retry zebra NHT registration if it failed before).
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Since this is a free()-type function, clear the caller's pointer to
NULL to aid static analysis and prevent UAF bugs.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Put static_nexthop -> prefix code into a small helper, remove extra
prefix variable, and grab AFI from prefix.
This commit should not result in any functional change.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Currently the nexthop tracking code is only sending to the requestor
what it was requested to match against. When the nexthop tracking
code was simplified to not need an import check and a nexthop check
in b8210849b8 for bgpd. It was not
noticed that a longer prefix could match but it would be seen
as a match because FRR was not sending up both the resolved
route prefix and the route FRR was asked to match against.
This code change causes the nexthop tracking code to pass
back up the matched requested route (so that the calling
protocol can figure out which one it is being told about )
as well as the actual prefix that was matched to.
Fixes: #10766
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Recent commit:
abc246e193
Has broken `make check` with recently new compilers:
/usr/bin/ld: staticd/libstatic.a(static_nb_config.o): warning: relocation against `zebra_ecmp_count' in read-only section `.text'
CCLD tests/bgpd/test_peer_attr
CCLD tests/bgpd/test_packet
/usr/bin/ld: staticd/libstatic.a(static_zebra.o): in function `static_zebra_capabilities':
/home/sharpd/frr5/staticd/static_zebra.c:208: undefined reference to `zebra_ecmp_count'
/usr/bin/ld: staticd/libstatic.a(static_zebra.o): in function `static_zebra_route_add':
/home/sharpd/frr5/staticd/static_zebra.c:418: undefined reference to `zebra_ecmp_count'
/usr/bin/ld: staticd/libstatic.a(static_nb_config.o): in function `static_nexthop_create':
/home/sharpd/frr5/staticd/static_nb_config.c:174: undefined reference to `zebra_ecmp_count'
/usr/bin/ld: /home/sharpd/frr5/staticd/static_nb_config.c:175: undefined reference to `zebra_ecmp_count'
/usr/bin/ld: warning: creating DT_TEXTREL in a PIE
collect2: error: ld returned 1 exit status
make: *** [Makefile:8679: tests/lib/test_grpc] Error 1
make: *** Waiting for unfinished jobs....
Essentially the newly introduced variable zebra_ecmp_count is not available in the
libstatic.a compiled and make check has code that compiles against it.
The fix is to just move the variable to the library.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Zebra sends a nexthop-update message on registeration, which will cause
existing routes to be reconfigured even no changes actually happened.
Don't register the nexthop again if it's already done.
Signed-off-by: Xiao Liang <shaw.leon@gmail.com>
Restrict the number of nexthops for a route to the compiled-in
limit. Be careful with the zapi route struct's array of nexthops
too.
Signed-off-by: Mark Stapp <mstapp@nvidia.com>
When the VRF interface is coming up, we don't need to fixup VRF ids - it
was already done in static_vrf_enable when the interface was created.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Since f60a1188 we store a pointer to the VRF in the interface structure.
There's no need anymore to store a separate vrf_id field.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Most users of if_lookup_address_exact only cared about whether the
address is any local address. Split that off into a separate function.
For the users that actually need the ifp - which I'm about to add a few
of - change it to prefer returning interfaces that are UP.
(Function name changed due to slight change in behavior re. UP state, to
avoid possible bugs from this change.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This removes a giant `switch { }` block from lib/zclient.c and
harmonizes all zclient callback function types to be the same (some had
a subset of the args, some had a void return, now they all have
ZAPI_CALLBACK_ARGS and int return.)
Apart from getting rid of the giant switch, this is a minor security
benefit since the function pointers are now in a `const` array, so they
can't be overwritten by e.g. heap overflows for code execution anymore.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Add a couple of back pointers to static route/path/nexthop structures to
simplify the NB code and save ~200 lines.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Test uses staticd which required some C++ header protections.
Additionally, the test also runs in the ubuntu20 docker container as
grpc is supported there by the packaging system.
Signed-off-by: Christian Hopps <chopps@labn.net>
The `enum zclient_send_status` enum needs to be extended
throughout the code base to use the new states and
to fix up places where we tested against the return
value being non zero.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Issue:
The bgp routes learnt from peers which are not installed in kernel are
advertised to peers. This can cause routers to send traffic to these
destinations only to get dropped. The fix is to provide a configurable
option "bgp suppress-fib-pending". When the option is enabled, bgp will
advertise routes only if it these are successfully installed in kernel.
Fix (Part1) :
* Added message ZEBRA_ROUTE_NOTIFY_REQUEST used by client to request
FIB install status for routes
* Added AFI/SAFI to ZAPI messages
* Modified the functions zapi_route_notify_decode(), zsend_route_notify_owner()
and route_notify_internal() to include AFI, SAFI as parameters
Signed-off-by: kssoman <somanks@gmail.com>
This should never happen; no need to debug guard it and it's not a
warning, if this isn't working then NHT is not working at all.
Signed-off-by: Quentin Young <qlyoung@nvidia.com>
During the yangification of staticd, refactoring of code
around static_hold_route data struct has been done, In this
context warning log message when VRF is not ready had been
removed. This should not be removed, adding it back.
I have missed one MPLS validation too, adding it back.
Signed-off-by: vishaldhingra <vdhingra@vmware.com>
Configuration example:
ip route 9.9.9.9/32 6.6.6.6 color 123
The SR Policy to be chosen is uniquely identified by the policy
endpoint (6.6.6.6) and the SR-TE color (123). Traffic will be
augmented with an MPLS label stack according to the active
candidate path of that particular policy.
Co-authored-by: GalaxyGorilla <sascha@netdef.org>
Signed-off-by: Sebastien Merle <sebastien@netdef.org>
1. Modifies the data structs to make the distance, tag and table-id
property of a route, i.e created a hireachical data struct to save
route and nexthop information.
2. Backend northbound implementation
Signed-off-by: VishalDhingra <vdhingra@vmware.com>
Remove a special-case clause for static routes - it was the same
as the clause for other recursive routes. Have staticd just tell
zebra that recursion is allowed. Update topotest that was aware
of this 'internal' flag.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Use a per-nexthop flag to indicate the presence of labels; add
some utility zapi encode/decode apis for nexthops; use the zapi
apis more consistently.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
For all the places we have a zclient->interface_up convert
them to use the interface ifp_up callback instead.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Switch the zclient->interface_add functionality to have everyone
use the interface create callback in lib/if.c
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Start the conversion to allow zapi interface callbacks to be
controlled like vrf creation/destruction/change callbacks.
This will allow us to consolidate control into the interface.c
instead of having each daemon read the stream and react accordingly.
This will hopefully reduce a bunch of cut-n-paste stuff
Create 4 new callback functions that will be controlled by
lib/if.c
create -> A upper level protocol receives an interface creation event
The ifp is brand spanking newly created in the system.
up -> A upper level protocol receives a interface up event
This means the interface is up and ready to go.
down -> A upper level protocol receives a interface down
destroy -> A upper level protocol receives a destroy event
This means to delete the pointers associated with it.
At this point this is just boilerplate setup for future commits.
There is no new functionality.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
in addition to non default vrf, once a new vrf is available, the static
daemon registers to events from that vrf, including presence of
interfaces. this permits to create static route with nexthop=interface.
Reversely, an unregistration is scheduled too when vrf disappears.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Fix:
Added a check in staticd upon receiving nexthop update from zebra such that
it will fail to resolve the nexthop if the connected address added as nexthop.
But still allowing to add to staticd database and appears in running config.
Throwing an warning massage to user if such misconfig issued.
Signed-off-by: Rajesh Girada <rgirada@vmware.com>
We were not processing interface up/down events for device only
static routes. This patch looks up the ifp and then calls
the same API we are using for interface add/remove events.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Track the state of the route and how we have installed it or not.
This commit limits the number of installs/updates/deletes to a
minimum number instead of repeated sends to zebra.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Route installs should be handled by the setup of nexthop tracking
instead of installing the route and then installing the nexthop
tracking again ( and reinstalling the route )
This change makes routes be installed one time.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
We are using static_nht_update in two different cases:
1) We have received a callback that a nexthop has changed and we need
to find any static route that is using it and we must refigure it.
2) We have received a new static route that depends on a pre-existing
nexthop, in which case we can go straight to the chase and just refigure
that particular node, since we already have all the information we need.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
