Use a larger storage to keep the `time_t` that is platform agnostic and
use the appropriated printing primitive.
Found by Coverity Scan (CID 1519793)
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Fix the case area is NULL.
Fixes: acc0029779 ("isisd: fix potential access to NULL pointer in isis_route_update")
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
The IS-IS SR code was missing a use of `PROTO_NAME`, making fabricd
collide with the isisd CLI command.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Rather than running selected source files through the preprocessor and a
bunch of perl regex'ing to get the list of all DEFUNs, use the data
collected in frr.xref.
This not only eliminates issues we've been having with preprocessor
failures due to nonexistent header files, but is also much faster.
Where extract.pl would take 5s, this now finishes in 0.2s. And since
this is a non-parallelizable build step towards the end of the build
(dependent on a lot of other things being done already), the speedup is
actually noticeable.
Also files containing CLI no longer need to be listed in `vtysh_scan`
since the .xref data covers everything. `#ifndef VTYSH_EXTRACT_PL`
checks are equally obsolete.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Fix potential access to NULL pointer in isis_route_update even if it is
not related with the fast-reroute implementation.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
If ISIS is running on an IPv6 only topology, the command "spf interval"
has no effect.
Only the IPv4 SPF tree timers are taken into account.
Base the next SPF scheduling on the last running SPF tree.
Fixes: be985ba059 ("isisd: make use of advanced concepts like arrays and loops")
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
When disabling and re-enabling the "mpls-te on" command, the LS TED
database is deleted but not re-created.
Cleanup the LS TED database instead of deleting it when disabling
"mpls-te".
Fixes: 1fa6385040.. ("isisd: Correct Valgrind errors")
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
If MPLS TE is enabled, the router encodes the local and remote interface
IP address in the "Extended Reachability" TLV.
> east-vm(config)# do show isis database detail east-vm.00-00
> Extended Reachability: 0007.e901.3333.00 (Metric: 10)
> Local Interface IP Address(es): 10.126.0.2
> Remote Interface IP Address(es): 10.126.0.3
> Maximum Bandwidth: 1.76258e+08 (Bytes/sec)
The remote interface is added when the circuit adjacency comes up after
setting MPLS TE. However, if MPLS TE is enabled after, the remote
address is not added. It happens after disabling and re-enabling the
MPLS TE.
> east-vm(config)# router isis 1
> east-vm(config-router)# no mpls on
> east-vm(config-router)# mpls on
> east-vm(config)# do show isis database detail east-vm.00-00
> Extended Reachability: 0007.e901.3333.00 (Metric: 10)
> Local Interface IP Address(es): 10.126.0.2
> Maximum Bandwidth: 1.76258e+08 (Bytes/sec)
Update the remote IPv4 and IPv6 of all adjacencies after enabling MPLS
TE.
Fixes: 1b3f47d04c ("isisd: Update TLVs processing for TE, RI & SR")
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
isis_ifp_down() may in some circumstances be called twice on a down
interface event.
Avoid applying fast-reroute on an already down interface.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
When an IS-IS interface is coming down, fast-reroute may be triggered
twice: a first time after the detection of the interface down event and
a second time after the detection of the adjacency down (because of the
expiration of the ISIS Hello or BFD timers).
Avoid a BFD down event from running fast-reroute another time if the
interface was already detected down.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Backup routes are sent to zebra by routing daemons such as isisd so that
the dataplane can pre-install them with a lower priority. When an
interface comes down, the associated primary routes are discarded by the
dataplane and the backup ones take over.
However, some dataplanes (e.g. Netlink ones) do not pre-install the
backup routes. Associated prefixes have no next-hop until SPF is
recomputed.
Apply fast-reroute as soon as an interface falls down by sending route
UPDATEs to zebra.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Allow the nexthoplookup function to return the first nexthop found on
ifindex interface if the IP is unspecified.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
When a adjacency falls down, the primary routes are not deleted on the
dataplane until the SPF is recomputed. Even the backup routes are
pre-installed on the dataplane, there is no fast-route optimization.
Reasons for an adjacency to come down are:
- BFD down
- Hello timer timeout
- User adjacency clear
Apply the backup route switchover for fast-reroute as soon an IS-IS
adjacency falls down before the first SPF re-computation. Pre-computed
backup routes are applied sooner.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
There are lib debugs being set but never show up in
`show debug` commands because there was no way to show
that they were being used. Add a bit of infrastructure
to allow this and then use it for `debug route-map`
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
When fabricd is configured to use an interface and there will be
no peers out that interface, the log file is filling up with:
Oct 04 10:50:03 host2 fabricd[1444769]: [HHXDJ-1DA93] ISIS-Adj (1): Threeway state change Initializing to Up
Oct 04 10:50:03 host2 fabricd[1444769]: [R18GA-MS9R7] OpenFabric: Started initial synchronization with 1111.1111.1111 on enp1s0f1np1
Oct 04 10:50:06 host2 fabricd[1444769]: [HHXDJ-1DA93] ISIS-Adj (1): Threeway state change Up to Initializing
Oct 04 10:50:07 host2 fabricd[1444769]: [NT6J7-1RYRF] OpenFabric: Initial synchronization on enp1s0f1np1 timed out!
Oct 04 10:50:07 host2 fabricd[1444769]: [R18GA-MS9R7] OpenFabric: Started initial synchronization with 3333.3333.3333 on enp1s0f0np0
Oct 04 10:50:08 host2 fabricd[1444769]: [HHXDJ-1DA93] ISIS-Adj (1): Threeway state change Up to Initializing
Oct 04 10:50:11 host2 fabricd[1444769]: [NT6J7-1RYRF] OpenFabric: Initial synchronization on enp1s0f0np0 timed out!
Oct 04 10:50:11 host2 fabricd[1444769]: [HHXDJ-1DA93] ISIS-Adj (1): Threeway state change Initializing to Up
Oct 04 10:50:11 host2 fabricd[1444769]: [R18GA-MS9R7] OpenFabric: Started initial synchronization with 1111.1111.1111 on enp1s0f1np1
Oct 04 10:50:14 host2 fabricd[1444769]: [HHXDJ-1DA93] ISIS-Adj (1): Threeway state change Up to Initializing
Oct 04 10:50:15 host2 fabricd[1444769]: [NT6J7-1RYRF] OpenFabric: Initial synchronization on enp1s0f1np1 timed out!
Oct 04 10:50:16 host2 fabricd[1444769]: [R18GA-MS9R7] OpenFabric: Started initial synchronization with 1111.1111.1111 on enp1s0f1np1
Oct 04 10:50:18 host2 fabricd[1444769]: [HHXDJ-1DA93] ISIS-Adj (1): Threeway state change Initializing to Up
The `Threeway state change..` message is guarded by a debug, but the other 2 are not.
Let's guard those with debugs since the log will be filled up rather quickly
with any sort of aggressive timers.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Before:
r1# conf
r1(config)# router isis <area-tag>
r1(config-router)# set-overload-bit
<cr>
r1(config-router)# end
After:
r1# conf
r1(config)# router isis <area-tag>
r1(config-router)# set-overload-bit
<cr>
on-startup Set overload bit on startup
r1(config-router)# set-overload-bit on-startup
(0-86400) Set overload time in seconds
r1(config-router)# set-overload-bit on-startup 300
r1(config-router)# end
Signed-off-by: Isabella de Leon <ideleon@microsoft.com>
==2623619==
==2623619== 6 bytes in 1 blocks are definitely lost in loss record 3 of 75
==2623619== at 0x483877F: malloc (vg_replace_malloc.c:307)
==2623619== by 0x4B55E4A: strdup (strdup.c:42)
==2623619== by 0x493C992: qstrdup (memory.c:128)
==2623619== by 0x1A9212: isis_instance_fast_reroute_level_1_remote_lfa_prefix_list_modify (isis_nb_config.c:1599)
==2623619== by 0x494837C: nb_callback_modify (northbound.c:1083)
==2623619== by 0x4948C6E: nb_callback_configuration (northbound.c:1352)
==2623619== by 0x494919D: nb_transaction_process (northbound.c:1473)
==2623619== by 0x4947DA9: nb_candidate_commit_apply (northbound.c:906)
==2623619== by 0x4947EBA: nb_candidate_commit (northbound.c:938)
==2623619== by 0x494EB9E: nb_cli_classic_commit (northbound_cli.c:64)
==2623619== by 0x494F3DC: nb_cli_apply_changes_internal (northbound_cli.c:250)
==2623619== by 0x494F4E2: nb_cli_apply_changes (northbound_cli.c:268)
==2623619== by 0x1BEF0F: isis_frr_remote_lfa_plist_magic (isis_cli.c:1899)
==2623619== by 0x1B7636: isis_frr_remote_lfa_plist (isis_cli_clippy.c:3406)
==2623619== by 0x48EBA75: cmd_execute_command_real (command.c:997)
==2623619== by 0x48EBD4E: cmd_execute_command_strict (command.c:1108)
==2623619== by 0x48EC1E6: command_config_read_one_line (command.c:1268)
==2623619== by 0x48EC35B: config_from_file (command.c:1313)
==2623619== by 0x4999CC1: vty_read_file (vty.c:2347)
==2623619== by 0x499A4AF: vty_read_config (vty.c:2567)
==2623619== by 0x4924B12: frr_config_read_in (libfrr.c:984)
==2623619== by 0x498F5E3: thread_call (thread.c:2008)
==2623619== by 0x49253DA: frr_run (libfrr.c:1198)
==2623619== by 0x14FC53: main (isis_main.c:273)
Fix this memory leak
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Runing most of isisd tests with --valgrind-memleaks give many memory errors.
This is due to the way isisd is stopped: performing a "no router isis XXX"
through CLI solves most of them. Indeed, isis_finish() doesn't call
isis_area_destroy() leaving many allocated memory unfreed.
This patch adds call to appropriate delete function or XFREE() when necessary to
properly free all alocated memory before terminating isisd.
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
The php value is defined in yang but not properly set.
Fixes: 8f6c893629 ("isisd: add segment-routing CLI commands")
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
When creating a xfrm interface FRR is crashing when configured
with isis. This is because the weird pattern of not allocating
list's until needed and then allowing the crash when we have
a usage pattern that was not expected. Just always allocate
the different lists that a circuit needs.
(gdb) bt
(gdb)
Fixes#11432
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
