There is no need to check for failure of a ALLOC call
as that any failure to do so will result in a assert
happening. So we can safely remove all of this code.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Both pim_ecmp_nexthop_lookup and pim_ecmp_fib_lookup_if_vif_index
pass the address in 2 times. Make function calls consistent
and just pass in the src once.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When doing nexthop lookups do not permanently allocate
memory in zebra and pim to track the nexthop specified
on the cli.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
These commands were being accepted in all vrf's and
affecting all vrf's behavior globally, since they were
global variables.
Modify the code to make these two commands work
on a per-vrf basis.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The following types are nonstandard:
- u_char
- u_short
- u_int
- u_long
- u_int8_t
- u_int16_t
- u_int32_t
Replace them with the C99 standard types:
- uint8_t
- unsigned short
- unsigned int
- unsigned long
- uint8_t
- uint16_t
- uint32_t
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
We know the vrf that we are in when we need to initiate a
rescan of the rpf cache. So pass it in and use that information.
This should help the rescan at scale with several vrf's cutting
out a lot of unnecessary work.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Feature of mtrace only IGMP sockets on pim sm and pim
ssm interfaces. Modifed IGMP socket creation and show
igmp interface command output.
Signed-off-by: Mladen Sablic <mladen.sablic@gmail.com>
This commit is the implementation of weak multicast traceroute.
It consists of IGMP module dealing with mtrace type IGMP messages
and client program mtrace/mtracebis for initiating mtrace queries.
Signed-off-by: Mladen Sablic <mladen.sablic@gmail.com>
The PIM_NODE command is only being used to display
default vrf configuration. Move this into the
vrf display and remove PIM_NODE.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The 'ip pim use-source ...' command returns a hard
success/failure. Allow it to return a soft-failure
for when we re-enter the same line.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When PIM handles some MSDP commands, a repeated command
was causing a CMD_WARNING_CONFIG_FAILED. This should
be a CMD_WARNING. Fix the code to allow vtysh to handle
this appropriately.
Ticket: CM-19053
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When we ask PIM to do a CLI search of a random (S,G) if the
(S,G) has no RPF due to no route, let the user know about
the issue instead of crashing.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This improves code readability and also future-proofs our codebase
against new changes in the data structure used to store interfaces.
The FOR_ALL_INTERFACES_ADDRESSES macro was also moved to lib/ but
for now only babeld is using it.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
This is an important optimization for users running FRR on systems with
a large number of interfaces (e.g. thousands of tunnels). Red-black
trees scale much better than sorted linked-lists and also store the
elements in an ordered way (contrary to hash tables).
This is a big patch but the interesting bits are all in lib/if.[ch].
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
When displaying the 'show ip pim upstream' command.
Display proper information about the RPF address
choosen.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When displaying the mroute table, add ability to fill
in all the missing data that for human eyes can be assumed.
This will allow people using grep over the command
can get more information.
sharpd@robot ~> sudo vtysh -c "show ip mroute fill"
Source Group Proto Input Output TTL Uptime
* 229.1.1.1 STATIC dum0 enp3s0 1 00:11:07 Default-IP-Routing-Table
* 229.1.1.1 STATIC dum0 virbr0 1 00:01:47 Default-IP-Routing-Table
sharpd@robot ~>
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Adds the ability to filter PIM Joins & IGMP reports on an interface.
Enabling a multicast boundary on an interface for a particular group
will prevent the interface from appearing in the group's OIL.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
If pim/igmp is not enabled on an interface, the ->info pointer will be
null. Need to check that before dereferencing it.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
This fixes the broken indentation of several foreach loops throughout
the code.
From clang's documentation[1]:
ForEachMacros: A vector of macros that should be interpreted as foreach
loops instead of as function calls.
[1] http://clang.llvm.org/docs/ClangFormatStyleOptions.html
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Start the conversion of pim configuration commands to use
the ferr side channel to allow more detailed information
to be returned to cli commands.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
All the rp debugs were a mish-mash of TRACE or ZEBRA,
but the reality they were all focused on handling NHT
issues associated with the RP's. So let's create
a new debug 'debug pim nht rp' if you are having
issues with RP's.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This feature does this:
Add the ability to store the non-prefix static RP
entries into a table. Then to lookup the G to
find the RP in that table, finding the longest
prefix match across both prefix-lists and
static RP's.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
1) Error check return from setsockopt and sockets
2) Check return codes for str2prefix
3) Clean up some potential NULL References
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
1) Clean up display of S,GRPt prune state to be more meaningful
2) Upon receipt of a S,GRPt prune make sure we transition to
the correct state
3) Upon loss of a S,GRPt prune make sure we transition to
the correct state as well as immediately send a *,G
join upstream to propagate the loss of the prune.
4) Removal of a weird S,G state being installed upon
loss of a S,G RPt prune.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
This could happen if routing isn't up yet but the command did take so we
should exit 0 here. Testing:
root@cel-redxp-10[frr-dwalton76]# vtysh -c 'conf t' -c' ip pim rp
11.11.11.11'
% No Path to RP address specified: 11.11.11.11
root@cel-redxp-10[frr-dwalton76]# echo $?
0
root@cel-redxp-10[frr-dwalton76]#
Upon frr restart vtysh replays pim bfd configuration
cli before pim sm command, this results in failure
of pim bfd config on the VIF as it is not pim enabled yet.
Inside pim bfd configuration, call to create PIM vif
handler if it is not created yet.
no ip pim bfd, if pim is not enabled display warning and return.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
This patch does two things:
1) Converts the pim_ifp->ifchannel_list to a pim_ifp->ifchannel_rb
2) Removes the hashing to use the RB RB_FIND instead.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Remove the redundant information in pim_ifp->pim_ifchannel_list
just call it pim_ifp->ifchannel_list
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
