Convert over to using the %pFX and %pRN modifiers
to output strings to allow us to consolidate on
one standard for printing prefixes.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Changes:
- Refactor list entry deletion to use a function that properly notifies
route map on deletion (fixes a heap-use-after-free).
- Prefix list entry wild card sets `le` to maximum IP mask value and
`any` is a boolean.
- Fix prefix list trie removal order (in `prefix_list_entry_update_start`).
- Let only the `any` callback change the value of field `any`.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
After the commands started working I noticed that prefix lists were
still not working and displaying incorrect information in
`show ip prefix-list`.
Turns out `any` must be set to `0` when a prefix is set and the prefix
entry **must** be installed in the prefix list head.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Based on the function `prefix_list_entry_add` and
`prefix_list_entry_delete` it was created two functions to replicate
its functionality without the assumption we are always alocating a new
prefix list entry.
Since the prefix list entry is stored in the YANG private data
structures, we want to avoid the allocation/free of memory that is
hold by the schema.
Every time a prefix list entry values change we must call
`prefix_list_entry_update_start` to uninstall the entry from prefix
list internal structures and then call
`prefix_list_entry_update_finish` to put them back.
The variable `installed` in the prefix list entry tracks the
installation status of the internal structure. It is possible that a
user unconfigures or forgets to add a `prefix` value and so we can't
install the entry until then.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Use northbound to write the configuration from now on. While here, fix
how `exact-match` configuration is being created.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Replace sprintf with snprintf where straightforward to do so.
- sprintf's into local scope buffers of known size are replaced with the
equivalent snprintf call
- snprintf's into local scope buffers of known size that use the buffer
size expression now use sizeof(buffer)
- sprintf(buf + strlen(buf), ...) replaced with snprintf() into temp
buffer followed by strlcat
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
And again for the name. Why on earth would we centralize this, just so
people can forget to update it?
Signed-off-by: David Lamparter <equinox@diac24.net>
There is really no reason to not put this in the cmd_node.
And while we're add it, rename from pointless ".func" to ".config_write".
[v2: fix forgotten ldpd config_write]
Signed-off-by: David Lamparter <equinox@diac24.net>
The only nodes that have this as 0 don't have a "->func" anyway, so the
entire thing is really just pointless.
Signed-off-by: David Lamparter <equinox@diac24.net>
* This commit implements the code style suggestions from Polychaeta.
* This commit also introduces a CLI to toggle the optimization and, a hidden
CLI to display the contents of the constructed prefix tree.
Signed-off-by: NaveenThanikachalam <nthanikachal@vmware.com>
* This commit introduces the building blocks.
A per-route-map prefix tree is introduced.
This tree will consist of the prefixes defined within the prefix-lists
that are added to the match clause of that route-map.
Signed-off-by: NaveenThanikachalam <nthanikachal@vmware.com>
The correct cast for these is (unsigned char), because "char" could be
signed and thus have some negative value. isalpha & co. expect an int
arg that is positive, i.e. 0-255. So we need to cast to (unsigned char)
when calling any of these.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
When a prefix-list is applied to a BGP neighbor to deny the learning
of specific routes, the hit count is showing 0 for BGP even though
the routes are being filtered correctly due
to the configured prefix-list.
Before fix:
c1# show ip prefix-list nag seq 10
ZEBRA: seq 10 permit any (hit count: 0, refcount: 0)
BGP: seq 10 permit any (hit count: 0, refcount: 0)
c1# show ip prefix-list nag seq 5
ZEBRA: seq 5 deny 1.0.1.0/24 (hit count: 0, refcount: 0)
BGP: seq 5 deny 1.0.1.0/24 (hit count: 0, refcount: 0)
Fix: Increment the prefix-list's hit count whenever a rule match occurs.
After Fix:
c1# show ip prefix-list nag seq 10
ZEBRA: seq 10 permit any (hit count: 0, refcount: 0)
BGP: seq 10 permit any (hit count: 6, refcount: 0)
c1# show ip prefix-list nag seq 5
ZEBRA: seq 5 deny 1.0.1.0/24 (hit count: 0, refcount: 0)
BGP: seq 5 deny 1.0.1.0/24 (hit count: 1, refcount: 0)
Signed-off-by: Visakha Erina visakha.erina@broadcom.com
Various compilers in our CI system were complaining about various
auto-conversions. Let's get these cleaned up a bit more.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The vty_prefix_list_install function was modifying the prefix to match the
specified prefix length and warning in the log file. Modify
code to use zlog_info as that a warn implies that something has
gone terribly wrong. Additionally display to the terminal as
well so that user can get immediate feedback from something
that they can correct.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Problem reported that some bgp and ospf json commands did not return
any json output at all if the bgp/ospf instance did not exist.
Additionally, some bgp and ospf json commands did not return any json
output if the instance existed but no neighbors were defined. This
fix makes these commands more consistent in returning empty braces for
json output and issue a message if not using json output. Additionally,
made the flag "use_json" a bool to make it consistent since previously,
it had been defined as an int, char, u_char, and bool at various places.
Ticket: CM-21040
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
With the usage of a 32 bit number as a integer, but storing
non-signed values in it, we have cases where numbers greater
than 2 billion are being read in and stored and used before
lower value numbers, which of course is awful and mean.
Fixes: #2126
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The following types are nonstandard:
- u_char
- u_short
- u_int
- u_long
- u_int8_t
- u_int16_t
- u_int32_t
Replace them with the C99 standard types:
- uint8_t
- unsigned short
- unsigned int
- unsigned long
- uint8_t
- uint16_t
- uint32_t
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
This should be allowed:
robot(config)# ip prefix-list outbound_asp_routes seq 33 permit 1.1.1.0/24 le 24
% Invalid prefix range for 1.1.1.0/24, make sure: len < ge-value <= le-value
This commit fixes the issue:
robot(config)# ip prefix-list outbound_asp_routes seq 33 permit 1.1.1.0/24 le 23
% Invalid prefix range for 1.1.1.0/24, make sure: len < ge-value <= le-value
robot(config)# ip prefix-list outbound_asp_routes seq 33 permit 1.1.1.0/24 le 24
robot(config)# ip prefix-list outbound_asp_routes seq 33 permit 1.1.1.0/24 le 25
robot(config)#
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When we have a v4 or v6 prefix list, only
apply it via a match when the address families
are the same.
Fixes: #1339
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Create a new function prefix_list_apply_which_prefix which
will return a pointer to the matching prefix that caused
the acceptance/denial.
This change will be used in future commits.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Register add/delete hooks with the prefix list code to properly change
ospf6_area's prefix list in/out pointers.
There are 2 other uncached uses of prefix lists in the ASBR route-map
code and the interface code; these should probably be cached too. (To
be fixed another day...)
Fixes: #453
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
The specific code here needs to establish an absolute order of more
specific to less specific possible matches in a prefix list. This is
indirectly checked by an assert on insertion, because the "next best"
entry is required to be consistent even when joining multiple chains
of candidates.
Unfortunately, trie_install_fn() would insert entries too far ahead in
the chain if another entry with higher sequence number was seen. This
breaks the trie and (rightfully) triggers the assertion failure on
insert.
Fixes: #937
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This reverts commit c14777c6bf.
clang 5 is not widely available enough for people to indent with. This
is particularly problematic when rebasing/adjusting branches.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
