Add a handler for socket errors that runs in the main pthread,
rather than the io pthread. When the io pthread encounters a
read error, capture the error and schedule a task for the main
pthread.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
```
2523558-==2523558==
2523558-==2523558== Conditional jump or move depends on uninitialised value(s)
2523558:==2523558== at 0x47F242: bgp_notify_admin_message (bgp_debug.c:505)
2523558-==2523558== by 0x47F242: bgp_notify_print (bgp_debug.c:534)
2523558-==2523558== by 0x4BA9BC: bgp_notify_receive (bgp_packet.c:1905)
2523558-==2523558== by 0x4BA9BC: bgp_process_packet (bgp_packet.c:2602)
2523558-==2523558== by 0x4904B7E: thread_call (thread.c:1681)
2523558-==2523558== by 0x48CAA27: frr_run (libfrr.c:1126)
2523558-==2523558== by 0x474B1A: main (bgp_main.c:540)
2523558-==2523558== Uninitialised value was created by a stack allocation
2523558:==2523558== at 0x4BA33D: bgp_process_packet (bgp_packet.c:2529)
```
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
This was somewhy under bgp_debug_udpate() guard and others are under
bgp_debug_neighbor_events().
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
Reference: https://www.cmand.org/communityexploration
--y2--
/ | \
c1 ---- x1 ---- y1 | z1
\ | /
--y3--
1. z1 announces 192.168.255.254/32 to y2, y3.
2. y2 and y3 tags this prefix at ingress with appropriate
communities 65004:2 (y2) and 65004:3 (y3).
3. x1 filters all communities at the egress to c1.
4. Shutdown the link between y1 and y2.
5. y1 will generate a BGP UPDATE message regarding the next-hop change.
6. x1 will generate a BGP UPDATE message regarding community change.
To avoid sending duplicate BGP UPDATE messages we should make sure
we send only actual route updates. In this example, x1 will skip
BGP UPDATE to c1 because the actual route is the same
(filtered communities - nothing changes).
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
Current code when we are establishing a peering relationship when
under the HAVE_CUMULUS block will dissallow v4/v6 connections if
we do not have v4/v6 addresses applied. This restriction is
a bit harsh and should be allowed but warned against.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Move the FOREACH_AFI_SAFI macro from bgpd.h to zebra.h( GLOBAL's YOUALL )
Then convert all the places that have the two level for loop to
iterate over all afi/safis
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Sample Configuration with prefix-list and community match rules
---------------------------------------------------------------
R1 ------- R2(DUT) ------- R3
Router2# show running-config
Building configuration...
Current configuration:
!
frr version 7.6-dev-MyOwnFRRVersion
frr defaults traditional
hostname router
log file /var/log/frr/bgpd.log
log syslog informational
hostname Router2
service integrated-vtysh-config
!
debug bgp updates in
debug bgp updates out
!
debug route-map
!
ip route 20.20.0.0/16 blackhole
ipv6 route 2001:db8::200/128 blackhole
!
interface enp0s9
ip address 10.10.10.2/24
!
interface enp0s10
ip address 10.10.20.2/24
!
interface lo
ip address 2.2.2.2/32
!
router bgp 2
bgp log-neighbor-changes
no bgp ebgp-requires-policy
neighbor 10.10.10.1 remote-as 1
neighbor 10.10.20.3 remote-as 3
!
address-family ipv4 unicast
neighbor 10.10.10.1 soft-reconfiguration inbound
neighbor 10.10.20.3 soft-reconfiguration inbound
neighbor 10.10.20.3 advertise-map ADV-MAP non-exist-map EXIST-MAP
exit-address-family
!
ip prefix-list DEFAULT seq 5 permit 1.1.1.5/32
ip prefix-list DEFAULT seq 10 permit 1.1.1.1/32
ip prefix-list EXIST seq 5 permit 10.10.10.10/32
ip prefix-list DEFAULT-ROUTE seq 5 permit 0.0.0.0/0
ip prefix-list IP1 seq 5 permit 10.139.224.0/20
ip prefix-list T2 seq 5 permit 1.1.1.5/32
!
bgp community-list standard DC-ROUTES seq 5 permit 64952:3008
bgp community-list standard DC-ROUTES seq 10 permit 64671:501
bgp community-list standard DC-ROUTES seq 15 permit 64950:3009
bgp community-list standard DEFAULT-ROUTE seq 5 permit 65013:200
!
route-map ADV-MAP permit 10
match ip address prefix-list IP1
!
route-map ADV-MAP permit 20
match community DC-ROUTES
!
route-map EXIST-MAP permit 10
match community DEFAULT-ROUTE
match ip address prefix-list DEFAULT-ROUTE
!
line vty
!
end
Router2#
Router2# show ip bgp 0.0.0.0
BGP routing table entry for 0.0.0.0/0
Paths: (1 available, best #1, table default)
Advertised to non peer-group peers:
10.10.10.1 10.10.20.3
1
10.10.10.1 from 10.10.10.1 (10.139.224.1)
Origin IGP, metric 0, valid, external, best (First path received)
Community: 64848:3011 65011:200 65013:200
Last update: Tue Oct 6 02:39:42 2020
Router2#
Sample output with non-exist-map when default route present in table
--------------------------------------------------------------------
Router2# show ip bgp
BGP table version is 4, local router ID is 2.2.2.2, vrf id 0
Default local pref 100, local AS 2
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 0.0.0.0/0 10.10.10.1 0 0 1 i
*> 1.1.1.1/32 10.10.10.1 0 0 1 i
*> 1.1.1.5/32 10.10.10.1 0 0 1 i
*> 10.139.224.0/20 10.10.10.1 0 0 1 ?
Displayed 4 routes and 4 total paths
Router2# show ip bgp neighbors 10.10.20.3 advertised-routes
BGP table version is 4, local router ID is 2.2.2.2, vrf id 0
Default local pref 100, local AS 2
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 0.0.0.0/0 0.0.0.0 0 1 i
*> 1.1.1.5/32 0.0.0.0 0 1 i <<<<<<<<< non-exist-map : 0.0.0.0/0 is present so, 10.139.224.0/20 not advertised
Total number of prefixes 2
Sample output with non-exist-map when default route not present in table
------------------------------------------------------------------------
Router2# show ip bgp
BGP table version is 5, local router ID is 2.2.2.2, vrf id 0
Default local pref 100, local AS 2
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 1.1.1.1/32 10.10.10.1 0 0 1 i
*> 1.1.1.5/32 10.10.10.1 0 0 1 i
*> 10.139.224.0/20 10.10.10.1 0 0 1 ?
Displayed 3 routes and 3 total paths
Router2#
Router2#
Router2# show ip bgp neighbors 10.10.20.3 advertised-routes
BGP table version is 5, local router ID is 2.2.2.2, vrf id 0
Default local pref 100, local AS 2
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 1.1.1.1/32 0.0.0.0 0 1 i
*> 1.1.1.5/32 0.0.0.0 0 1 i
*> 10.139.224.0/20 0.0.0.0 0 1 ? <<<<<<<<< non-exist-map : 0.0.0.0/0 is not present so, 10.139.224.0/20 advertised
Total number of prefixes 3
Router2#
Sample output with exist-map when default route present in table
--------------------------------------------------------------------
Router2# show ip bgp
BGP table version is 8, local router ID is 2.2.2.2, vrf id 0
Default local pref 100, local AS 2
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 0.0.0.0/0 10.10.10.1 0 0 1 i
*> 1.1.1.1/32 10.10.10.1 0 0 1 i
*> 1.1.1.5/32 10.10.10.1 0 0 1 i
*> 10.139.224.0/20 10.10.10.1 0 0 1 ?
Displayed 4 routes and 4 total paths
Router2#
Router2#
Router2#
Router2#
Router2# show ip bgp neighbors 10.10.20.3 advertised-routes
BGP table version is 8, local router ID is 2.2.2.2, vrf id 0
Default local pref 100, local AS 2
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 0.0.0.0/0 0.0.0.0 0 1 i
*> 1.1.1.1/32 0.0.0.0 0 1 i
*> 1.1.1.5/32 0.0.0.0 0 1 i
*> 10.139.224.0/20 0.0.0.0 0 1 ? <<<<<<<<< exist-map : 0.0.0.0/0 is present so, 10.139.224.0/20 advertised
Total number of prefixes 4
Router2#
Sample output with exist-map when default route not present in table
--------------------------------------------------------------------
Router2# show ip bgp
BGP table version is 9, local router ID is 2.2.2.2, vrf id 0
Default local pref 100, local AS 2
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 1.1.1.1/32 10.10.10.1 0 0 1 i
*> 1.1.1.5/32 10.10.10.1 0 0 1 i
*> 10.139.224.0/20 10.10.10.1 0 0 1 ?
Displayed 3 routes and 3 total paths
Router2#
Router2#
Router2#
Router2# show ip bgp neighbors 10.10.20.3 advertised-routes
BGP table version is 9, local router ID is 2.2.2.2, vrf id 0
Default local pref 100, local AS 2
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 1.1.1.5/32 0.0.0.0 0 1 i <<<<<<<<< exist-map : 0.0.0.0/0 is not present so, 10.139.224.0/20 not advertised
Total number of prefixes 1
Router2#
Signed-off-by: Madhuri Kuruganti <k.madhuri@samsung.com>
Problem found that turning an update-delay would only delay prefixes
learned from peers by delaying bestpath, but would allow local routes
(network statements or redistributed) to be immediately advertised,
followed by an End of Rib indicator. This fix delays sending local
routes until the update-delay process is completed, which matches
what testing shows other vendors do..
Ticket: CM-31743
Signed-off-by: Don Slice <dslice@nvidia.com>
- tracepoint() -> frrtrace()
- tracelog() -> frrtracelog()
- tracepoint_enabled() -> frrtrace_enabled()
Also removes copypasta'd #ifdefs for those LTTng macros, those are
handled in lib/trace.h
Signed-off-by: Quentin Young <qlyoung@nvidia.com>
bgp->default_keepalive was not considered when setting
peer->v_keepalive, causing the effective keepalive interval to
always be (holdtime/3), even when default_keepalive < (holdtime/3).
This ensures that the default_keepalive is used when it's set and
is < (holdtime/3).
Signed-off-by: Trey Aspelund <taspelund@cumulusnetworks.com>
(cherry picked from commit d8bf8c6128f2e493d473148213bd663a500c7f73)
The RFC states:
The BGP Identifier is a 4-octet, unsigned, non-zero integer that
should be unique within an AS. The value of the BGP Identifier
for a BGP speaker is determined on startup and is the same for
every local interface and every BGP peer.
We were going slightly beyond this and ensuring that the address
was a specific range of addresses which is no longer relevant.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
* Fixed integration in FSM and packet handling.
* Added CLI "show" output, incl. JSON.
* For review and testing only.
Signed-off-by: David Schweizer <dschweizer@opensourcerouting.org>
Remove mid-string line breaks, cf. workflow doc:
.. [#tool_style_conflicts] For example, lines over 80 characters are allowed
for text strings to make it possible to search the code for them: please
see `Linux kernel style (breaking long lines and strings)
<https://www.kernel.org/doc/html/v4.10/process/coding-style.html#breaking-long-lines-and-strings>`_
and `Issue #1794 <https://github.com/FRRouting/frr/issues/1794>`_.
Scripted commit, idempotent to running:
```
python3 tools/stringmangle.py --unwrap `git ls-files | egrep '\.[ch]$'`
```
Signed-off-by: David Lamparter <equinox@diac24.net>
Issue: bgp_process_writes will be called when the fd is writable.
And it will bgp_generate_updgrp_packets to generate the
update packets no matter MRAI is set or not.
Fix: bgp_generate_updgrp_packets thread will return without sending
any update when MRAI timer is still running.
Signed-off-by: Richard Wu <wutong23@baidu.com>
Replace sprintf with snprintf where straightforward to do so.
- sprintf's into local scope buffers of known size are replaced with the
equivalent snprintf call
- snprintf's into local scope buffers of known size that use the buffer
size expression now use sizeof(buffer)
- sprintf(buf + strlen(buf), ...) replaced with snprintf() into temp
buffer followed by strlcat
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Some were converted to bool, where true/false status is needed.
Converted to void only those, where the return status was only false or true.
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
Some code in bgp_route_refresh_receive was spread across several
lines because of an end of line commit. Move comment to a place
to allow better formating.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Currently During bgp open collision resolution if both
the router-id's are the same, we correctly follow
the RFC and close the connection. The problem is of course
that there is no notification of the error in configuration
to the end user other than a subtle open debug message.
Explicitly call out the miss-configuration as an error message
as that this miss-config took several hours of debugging to notice.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
*Adding helper caller hooks function for signalling from BGPD
to ZEBRA to enable or disable GR feature in ZEBRA depending
on bgp per peer gr configuration.
Signed-off-by: Biswajit Sadhu <sadhub@vmware.com>
