Since f60a1188 we store a pointer to the VRF in the interface structure.
There's no need anymore to store a separate vrf_id field.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
zclient_send_localsid is called by various routing protocol daemons. To set the
srv6 endpoint function. Fix a hard-coded error in the initial implementation.
Before this PR, the srv6 function will be registered to zebra as a BGP route
even if isisd executes zclient_send_localsid.
Signed-off-by: Hiroki Shirokura <hiroki.shirokura@linecorp.com>
This removes a giant `switch { }` block from lib/zclient.c and
harmonizes all zclient callback function types to be the same (some had
a subset of the args, some had a void return, now they all have
ZAPI_CALLBACK_ARGS and int return.)
Apart from getting rid of the giant switch, this is a minor security
benefit since the function pointers are now in a `const` array, so they
can't be overwritten by e.g. heap overflows for code execution anymore.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
It allows FRR to read the interface config even when the necessary VRFs
are not yet created and interfaces are in "wrong" VRFs. Currently, such
config is rejected.
For VRF-lite backend, we don't care at all about the VRF of the inactive
interface. When the interface is created in the OS and becomes active,
we always use its actual VRF instead of the configured one. So there's
no need to reject the config.
For netns backend, we may have multiple interfaces with the same name in
different VRFs. So we care about the VRF of inactive interfaces. And we
must allow to preconfigure the interface in a VRF even before it is
moved to the corresponding netns. From now on, we allow to create
multiple configs for the same interface name in different VRFs and
the necessary config is applied once the OS interface is moved to the
corresponding netns.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Pass down the safi for when we need address
resolution. At this point in time we are
hard coding the safi to SAFI_UNICAST.
Future commits will take advantage of this.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
These are no longer really needed. The client just needs
to call nexthop resolution instead.
So let's remove the zapi types.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
As NHRP expects some notification of neighboring entries on GRE
interface, when a new interface notification is encountered, the
exact neighbor state flag is found. Previously, the flag passed
to the upper layer was forced to NDM_STATE which is REACHABLE,
as can be seen on below trace:
2021/08/25 10:58:39 NHRP: [QQ0NK-1H449] Netlink: new-neigh 102.1.1.1 dev gre1 lladdr 10.125.0.2 nud 0x2 cache used 1 type 5
When passing the real value, NHRP received an other value like STALE.
2021/08/25 11:28:44 NHRP: [QQ0NK-1H449] Netlink: new-neigh 102.1.1.1 dev gre1 lladdr 10.125.0.2 nud 0x4 cache used 0 type 5
This flag is important for NHRP, as it permits to monitor the link
layer of NHRP entries.
Fixes: d603c0774e ("nhrp, zebra, lib: enforce usage of zapi_neigh_ip structure")
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
When we get a bad value for the opaque data length, instead
of stopping the program, discard the data and move on.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
We are sending up to ZAPI_MESSAGE_OPAQUE_LENGTH but checking
for one less. We know the data will fit in it to that size.
Also we have asserts on the write to ensure we don't go over
it
Fixes: #8995
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Adding defensive code to the interface_link_params zebra callback
to check if the link params changed before taking action.
Signed-off-by: Karen Schoener <karen@voltanet.io>
The %p printf format specifier does already print the pointer address
with a leading "0x" prefix (indicating a hexadecimal number). There's
no need to add that prefix manually.
While here, replace explicit function names in log messages by
__func__.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
https://github.com/FRRouting/frr/pull/5865#discussion_r597670225
As this comment says. ZEBRA_FLAG_XXX should not have been used.
To communicate SRv6 Route Information. A simple Nexthop Flag would
have been sufficient for SRv6 information. And I fixed the whole
thing that way.
Signed-off-by: Hiroki Shirokura <slank.dev@gmail.com>
I agree with the PR review from mstap and merged
the following two functions into one.
- zapi_nexthop_seg6_cmp
- zapi_nexthop_seg6local_cmp
[note]
If both of them have more complex extensions in the future,
I think it will be less confusing to remove the integration
of these functions and make them as separate functions as
before.
Signed-off-by: Hiroki Shirokura <slank.dev@gmail.com>
This commit add usuful function to configure SRv6 localsid
which is represented with seg6local lwt route.
Now, it can support only NEXTHOP_TYPE_IFINDEX route.
Actual configurationof SRv6 localsid is performed with
ZEBRA_ROUTE_ADD. So this is just a wrapper function
for route-install.
Signed-off-by: Hiroki Shirokura <slank.dev@gmail.com>
This commit add new nexthop's addional object for SRv6
routing about seg6 route. Before this commit,
we can add MPLS info as additional object on nexthop.
This commit make it add more support about seg6 routes.
seg6 routes are ones of the LWT routing mechanism,
so configuration of seg6local routes is performed by
ZEBRA_ROUTE_SEND, it's same as MPLS configuration.
Real configuration implementation isn't implemented at
this commit. later commit add that. This commit add
only nexthop additional object and some misc functions.
Signed-off-by: Hiroki Shirokura <slank.dev@gmail.com>
This commit is a part of #5853 works that add new structures for
SRv6-locator. This structure will be used by zebra and another
routing daemon and its ZAPI messaging to manage SRv6-locator.
Encoder/decoder for ZAPI stream is also added by this commit.
Real configuration mechanism isn't implemented at this commit.
later commit add real configure implementation. This commit add only
SRv6-locator's structures and misc functions.
Signed-off-by: Hiroki Shirokura <slank.dev@gmail.com>
This commit is a part of #5853 works that add new nexthop's addional
object for SRv6 routing about seg6local route. Before this commit,
we can add MPLS info as additional object on nexthop.
This commit make it add more support about seg6local routes.
seg6local routes are ones of the LWT routing mechanism,
so configuration of seg6local routes is performed by
ZEBRA_ROUTE_SEND, it's same as MPLS configuration.
Real configuration implementation isn't implemented at this commit.
later commit add that. This commit add only nexthop additional object
and some misc functions.
Signed-off-by: Hiroki Shirokura <slank.dev@gmail.com>
flush netlink related dependencies with gre information.
Add some linux headers required to compile with it.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Use unsigned value for all RA requests to Zebra
- encoding signed int as unsigned is bad practice
- RA interval is never, and should never be, negative
Signed-off-by: Quentin Young <qlyoung@nvidia.com>
zapi_nbr structure is renamed to zapi_neigh_ip.
Initially used to set a neighbor ip entry for gre interfaces, this
structure is used to get events from the zebra layer to nhrp layer.
The ndm state has been added, as it is needed on both sides.
The zebra dplane layer is slightly modified.
Also, to clarify what ZEBRA_NEIGH_ADD/DEL means, a rename is done:
it is called now ZEBRA_NEIGH_IP_ADD/DEL, and it signified that this
zapi interface permits to set link operations by associating ip
addresses to link addresses.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
This patch implements new zapi api to get neighbor information that zebra knows
and that other daemons may need to know. Actually, nhrp daemons is
interested in getting the neighbor information on gre interfaces, and
the API will be used for that.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Back when I put this together in 2015, ISO C11 was still reasonably new
and we couldn't require it just yet. Without ISO C11, there is no
"good" way (only bad hacks) to require a semicolon after a macro that
ends with a function definition. And if you added one anyway, you'd get
"spurious semicolon" warnings on some compilers...
With C11, `_Static_assert()` at the end of a macro will make it so that
the semicolon is properly required, consumed, and not warned about.
Consistently requiring semicolons after "file-level" macros matches
Linux kernel coding style and helps some editors against mis-syntax'ing
these macros.
Signed-off-by: David Lamparter <equinox@diac24.net>
like it has been done for iptable contexts, a zebra dplane context is
created for each ipset/ipset entry event. The zebra_dplane_ctx job is
then enqueued and processed by separate thread. Like it has been done
for zebra_pbr_iptable context, the ipset and ipset entry contexts are
encapsulated into an union of structures in zebra_dplane_ctx.
There is a specificity in that when storing ipset_entry structure, there
was a backpointer pointer to the ipset structure that is necessary
to get some complementary information before calling the hook. The
proposal is to use an ipset_entry_info structure next to the ipset_entry,
in the zebra_dplane context. That information is used for ipset_entry
processing. The ipset name and the ipset type are the only fields
necessary.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Neither tabs nor newlines are acceptable in syslog messages. They also
break line-based parsing of file logs.
Signed-off-by: David Lamparter <equinox@diac24.net>
The raw zapi apis to encode and decode NHGs don't need to be
public; also add a little more validity-checking.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
The re->flags and re->status in debugs were being dumped as hex values.
I can never quickly decode this. Here is an idea. Let's let FRR do
it for me.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
