When a node is top-level, we shouldn't stop the whole processing, we
should just skip this single node.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
(cherry picked from commit 8287fbe453)
`darr_avail` returns the available capacity excluding the already
existing terminating NULL byte. Take this into account when using
`darr_avail`. Otherwise, if the error length is a power of 2, the
capacity is never enough and the function stucks in an infinite loop.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
(cherry picked from commit cb6032d6b3)
If the initial darr capacity is not enough for the output, the `ap` is
reused multiple times, which is wrong, because it may be altered by
`vsnprintf`. Make a copy of `ap` each time instead of reusing.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
(cherry picked from commit ee0c1cc1e4)
./configure [...] --disable-ripngd
could lead to:
mgmtd/mgmt_vty.c:614:5: warning: "HAVE_RIPNGD" is not defined, evaluates to 0 [-Wundef]
614 | #if HAVE_RIPNGD
| ^~~~~~~~~~~
Signed-off-by: Vincent Jardin <vjardin@free.fr>
(cherry picked from commit 717b3350bb)
6vPE enables the announcement of IPv6 VPN prefixes through an IPv4 BGP
session. In this scenario, the next hop addresses for these prefixes are
represented in an IPv4-mapped IPv6 format, noted as ::ffff:[IPv4]. This
format indicates to the peer that it should route these IPv6 addresses
using information from the IPv4 nexthop. For example:
> Path Attribute - MP_REACH_NLRI
> [...]
> Address family identifier (AFI): IPv6 (2)
> Subsequent address family identifier (SAFI): Labeled VPN Unicast (128)
> Next hop: RD=0:0 IPv6=::ffff:192.0.2.5 RD=0:0 Link-local=fe80::501d:42ff:feef:b021
> Number of Subnetwork points of attachment (SNPA): 0
This rule is set out in RFC4798:
> The IPv4 address of the egress 6PE router MUST be encoded as an
> IPv4-mapped IPv6 address in the BGP Next Hop field.
However, in some situations, bgpd sends a standard nexthop IPv6 address
instead of an IPv4-mapped IPv6 address because the outgoing interface for
the BGP session has a valid IPv6 address. This is problematic because
the peer router may not be able to route the nexthop IPv6 address (ie.
if the outgoing interface has not IPv6).
Fix the issue by always sending a IPv4-mapped IPv6 address as nexthop
when the BGP session is on IPv4 and address family IPv6.
Link: https://datatracker.ietf.org/doc/html/rfc4798#section-2
Fixes: 92d6f76 ("lib,zebra,bgpd: Fix for nexthop as IPv4 mapped IPv6 address")
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
(cherry picked from commit 0325116a27)
This test uses the connected ipv4 mapped ipv6 prefix
to resolve the received BGP routes.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Signed-off-by: François Dumontet <francois.dumontet@6wind.com>
(cherry picked from commit 4d7df91752)
A macvlan interface can have its underlying link-interface in another
namespace (aka. netns). However, by default, zebra does not know the
interface from the other namespaces. It results in a crash the pointer
to the link interface is NULL.
> 6 0x0000559d77a329d3 in zebra_vxlan_macvlan_up (ifp=0x559d798b8e00) at /root/frr/zebra/zebra_vxlan.c:4676
> 4676 link_zif = link_ifp->info;
> (gdb) list
> 4671 struct interface *link_ifp, *link_if;
> 4672
> 4673 zif = ifp->info;
> 4674 assert(zif);
> 4675 link_ifp = zif->link;
> 4676 link_zif = link_ifp->info;
> 4677 assert(link_zif);
> 4678
> (gdb) p zif->link
> $2 = (struct interface *) 0x0
> (gdb) p zif->link_ifindex
> $3 = 15
Fix the crash by returning when the macvlan link-interface is in another
namespace. No need to go further because any vxlan under the macvlan
interface would not be accessible by zebra.
Link: https://github.com/FRRouting/frr/issues/15370
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
(cherry picked from commit 44e6e3868d)
Iggy Frankovic discovered an ospfd crash when perfomring fuzzing of OSPF LSA
packets. The crash occurs in ospf_te_parse_te() function when attemping to
create corresponding egde from TE Link parameters. If there is no local
address, an edge is created but without any attributes. During parsing, the
function try to access to this attribute fields which has not been created
causing an ospfd crash.
The patch simply check if the te parser has found a valid local address. If not
found, we stop the parser which avoid the crash.
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
(cherry picked from commit a73e66d073)
When a prefix-list entry is updated, current NB code calls the
replacement code multiple times, once per each updated field. It means
that when multiple fields of an entry are changed in a single commit,
the replacement is done with an interim state of a prefix-list instead
of a final one. To fix the issue, we should call the replacement code
once, after all fields of an entry are updated.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
(cherry picked from commit 0bc2ab8598)
When an access-list entry is updated, current NB code calls notification
hooks for each updated field. It means that when multiple fields of an
entry are changed in a single commit, the hooks are run with an interim
state of an access-list instead of a final one. To fix the issue, we
should call the hooks once, after all fields of an entry are updated.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
(cherry picked from commit a9460ae713)
adding a tests about:
"no bgp as-path access-list" command.
the folloxing "clear bgp *" command leads to the
crash exhibited above.
a sleep had been added to capture the crash befor the end of scenario.
50 ../sysdeps/unix/sysv/linux/raise.c: No such file or directory.
[Current thread is 1 (Thread 0x7f5f05cbb9c0 (LWP 1371086))]
(gdb) bt
context=0x7ffcf2c216c0) at lib/sigevent.c:248
acl_list=0x55c976ec03c0) at bgpd/bgp_aspath.c:1688
dummy=0x7ffcf2c22340, object=0x7ffcf2c21e70) at bgpd/bgp_routemap.c:2401
match_object=0x7ffcf2c21e70, set_object=0x7ffcf2c21e70, pref=0x0)
at lib/routemap.c:2687
attr=0x7ffcf2c220b0, afi=AFI_IP, safi=SAFI_UNICAST, rmap_name=0x0, label=0x0,
num_labels=0, dest=0x55c976ebeaf0) at bgpd/bgp_route.c:1807
addpath_id=0, attr=0x7ffcf2c22450, afi=AFI_IP, safi=SAFI_UNICAST, type=10,
sub_type=0, prd=0x0, label=0x0, num_labels=0, soft_reconfig=0, evpn=0x0)
at bgpd/bgp_route.c:4424
packet=0x7ffcf2c22410) at bgpd/bgp_route.c:6266
packet=0x7ffcf2c22410, mp_withdraw=false) at bgpd/bgp_packet.c:341
peer=0x55c976e89ed0, size=43) at bgpd/bgp_packet.c:2414
at bgpd/bgp_packet.c:3899
Signed-off-by: Francois Dumontet <francois.dumontet@6wind.com>
(cherry picked from commit 324fa21015)
By calling `ly_log_options` with `LY_LOSTORE`, the current code
effectively disables libyang logging and never enables it back. The call
is done to get the current logging options, but we don't really need
that. When looking for a schema node, we don't want neither to log nor
to store the error, so simply set the temporary options to 0.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
(cherry picked from commit 3cd6ddaec6)
The code expects these leafs to always exist. If they are not set, the
daemon would crash. CLI always sets them, but we should properly mark
them as mandatory/default to prevent them from being missed when using
the API.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
(cherry picked from commit 83a3b0f10f)
Containers inside a choice's case must be treated as presence containers
as they can be explicitly created and deleted. They must have `create`
and `destroy` callbacks, otherwise the internal data they represent may
never be deleted.
The issue can be reproduced with the following steps:
- create an access-list with destination-network params
```
# access-list test seq 1 permit ip any 10.10.10.0 0.0.0.255
```
- delete the `destination-network` container
```
# mgmt delete-config /frr-filter:lib/access-list[name='test'][type='ipv4']/entry[sequence='1']/destination-network
# mgmt commit apply
MGMTD: No changes found to be committed!
```
As the `destination-network` container is non-presence, and all its
leafs are mandatory, mgmtd doesn't see any changes to be commited and
simply updates its YANG data tree without passing any updates to backend
daemons.
This commit fixes the issue by requiring `create` and `destroy`
callbacks for containers inside choice's cases.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
(cherry picked from commit 0b905f7404)
When ordering operations, destroys must always come before other
operations, to correctly cover the change of a "case" in a "choice".
The problem can be reproduced with the following commands:
```
access-list test seq 1 permit 10.0.0.0/8
access-list test seq 1 permit host 10.0.0.1
access-list test seq 1 permit 10.0.0.0/8
```
Before this commit, the order of changes would be the following:
- `access-list test seq 1 permit 10.0.0.0/8`
- `modify` for `ipv4-prefix`
- `access-list test seq 1 permit host 10.0.0.1`
- `destroy` for `ipv4-prefix`
- `modify` for `host`
- `access-list test seq 1 permit 10.0.0.0/8`
- `modify` for `ipv4-prefix`
- `destroy` for `host`
As `destroy` for `host` is called last, it rewrites the fields that were
filled by `modify` callback of `ipv4-prefix`. This commit fixes this
problem by always calling `destroy` callbacks first.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
(cherry picked from commit 38b85e0c2b)
Notifications are sent by mgmtd for each session of a client, so they
should be processed once per each session.
Also, add session_id parameter to an async_notification callback as all
other callbacks have this parameter.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
(cherry picked from commit 13359c5cc9)
Test prefix-list matching and some other EVPN stuff.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
(cherry picked from commit 049a2c0c0a)
Convert only when this is really needed, e.g. `match ip address prefix-list ...`.
Otherwise, we can't have mixed match clauses, like:
```
match ip address prefix-list p1
match evpn route-type prefix
```
This won't work, because the prefix is already converted, and we can't extract
route type, vni, etc. from the original EVPN prefix.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
(cherry picked from commit 439b739495)
When ordering the NB callbacks according to their priorities, if the
operation is "destroy" we should reverse the order, to destroy the
dependants before the dependencies.
This fixes the crash, that can be reproduced with the following steps:
```
frr# conf term file-lock
frr(config)# affinity-map map bit-position 10
frr(config)# interface test
frr(config-if)# link-params
frr(config-link-params)# affinity map
frr(config-link-params)# exit
frr(config-if)# exit
frr(config)# mgmt commit apply
frr(config)# no affinity-map map
frr(config)# interface test
frr(config-if)# link-params
frr(config-link-params)# no affinity map
frr(config-link-params)# exit
frr(config-if)# exit
frr(config)# mgmt commit apply
```
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
(cherry picked from commit 01f371a677)
Other objects depend on affinity-maps being created before them by using
leafref with require-instance true. Set the priority to ensure that.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
(cherry picked from commit 323caf1d70)
- call the new notification hooks when backends call the old notification
posting API.
Signed-off-by: Christian Hopps <chopps@labn.net>
(cherry picked from commit 1d4ea437e4)
Before this fix would always return empty results b/c there was no
libyang tree to print to output format.
Signed-off-by: Christian Hopps <chopps@labn.net>
(cherry picked from commit dff28248c3)
