rfc7999:
A BGP speaker receiving an announcement tagged with the BLACKHOLE
community SHOULD add the NO_ADVERTISE or NO_EXPORT community as
defined in [RFC1997], or a similar community, to prevent propagation
of the prefix outside the local AS. The community to prevent
propagation SHOULD be chosen according to the operator's routing
policy.
Sent:
```
router bgp 65534
no bgp ebgp-requires-policy
neighbor 192.168.0.2 remote-as 65030
!
address-family ipv4 unicast
redistribute connected
neighbor 192.168.0.2 route-map spine out
exit-address-family
!
!
ip prefix-list self seq 5 permit 192.168.100.1/32
!
route-map spine permit 10
match ip address prefix-list self
set community blackhole
!
```
Received:
```
spine1-debian-9# show ip bgp 192.168.100.1/32
BGP routing table entry for 192.168.100.1/32
Paths: (1 available, best #1, table default, inform peer to blackhole prefix)
Not advertised to any peer
65534
192.168.0.1 from 192.168.0.1 (192.168.100.1)
Origin incomplete, metric 0, valid, external, best (First path received)
Community: blackhole no-advertise
Last update: Thu Jan 21 12:56:39 2021
```
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
```
exit1-debian-9(config-route-map)# set community
AA:NN Community number in AA:NN format (where AA and NN are (0-65535)) or local-AS|no-advertise|no-export|internet|graceful-shutdown|accept-own-nexthop|accept-own|route-filter-translated-v4|route-filter-v4|route-filter-translated-v6|route-filter-v6|llgr-stale|no-llgr|blackhole|no-peer or additive
none No community attribute
```
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
This script involves Restart ospfd,
restart frr with ospf enabled,
staticd with redistribution inside ospf is enabled
Signed-off-by: nguggarigoud <nguggarigoud@vmware.com>
Fix the handling of multiple BFD profiles by adding the appropriated
code to push/pop contexts inside BFD configuration node.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
The purpose of the Attach-bit is to accomplish inter-area routing. In other
venders, the Attached-bit is automatically set when a router is configured
as a L1|L2 router and has two adjacencies. When a L1 router receives a LSP
with the Attached-bit set it is supposed to create a default route pointing
toward the neighbor to provide a default path out of the L1 area.
ISIS implementation has been fixed to support the above definition:
Setting the Attach-bit is now the default behavior and we allow the user to
turn it off.
We will only set the Default Attach-bit when creating a L1 LSP, if we are
a L1|L2 router and have a L2 adjacency up.
When a L1 router receives a LSP with the Attach-bit set, we will create a
default route pointing to the L1|L2 router as the nexthop.
The default route will be removed if the LSP is received with the Attach-bit
cleared.
Signed-off-by: Lynne Morrison <lynne@voltanet.io>
Use a pre-built backup path from the post-convergence SPF tree to
make the overall calculation deterministic. This is also a
requirement for non-adjacent P/Q spaces since it's way easier
to organize multiple P and Q spaces using a 'fixed' backup path.
Signed-off-by: GalaxyGorilla <sascha@netdef.org>
When P and Q spaces are adjacent then it makes sense to use adjacency SIDs to
from the P node to the Q node. There are some other corner cases where this
makes also sense like when a P/Q node adjacent to root node.
Signed-off-by: GalaxyGorilla <sascha@netdef.org>
A reverse SPF is important in the context of TI-LFA, e.g. for
computing so called Q spaces. In case the weights of the links are
symmetric there is no difference to the 'normal' SPF and hence this
patch is really just needed for the case with asymmetric link
weights.
Signed-off-by: GalaxyGorilla <sascha@netdef.org>
The raw zapi apis to encode and decode NHGs don't need to be
public; also add a little more validity-checking.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
1. Added 7 testcases to verify PIM BSM functionality. Here we have used Scapy
to send raw packet, generated using Cisco and FRR. Raw packets are kept in
Signed-off-by: Kuldeep Kashyap <kashyapk@vmware.com>
1. Scapy, is a python tool, which would be used in multicast-pim-bsm-topo1
suite automation. We have some BSM raw packets captured and saved in
JSON file, these packets would be sent using scapy on tests demands.
Signed-off-by: Kuldeep Kashyap <kashyapk@vmware.com>
1. Added 8 testcases to verify PIM BSM functionality. Here we have used Scapy
to send raw packet, generated using Cisco and FRR. Raw packets are kept in
JSON file and sent tests on-demand in script.
Signed-off-by: Kuldeep Kashyap <kashyapk@vmware.com>
