like it has been done for iptable contexts, a zebra dplane context is
created for each ipset/ipset entry event. The zebra_dplane_ctx job is
then enqueued and processed by separate thread. Like it has been done
for zebra_pbr_iptable context, the ipset and ipset entry contexts are
encapsulated into an union of structures in zebra_dplane_ctx.
There is a specificity in that when storing ipset_entry structure, there
was a backpointer pointer to the ipset structure that is necessary
to get some complementary information before calling the hook. The
proposal is to use an ipset_entry_info structure next to the ipset_entry,
in the zebra_dplane context. That information is used for ipset_entry
processing. The ipset name and the ipset type are the only fields
necessary.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Implement new ringbuf function to do the proper socket reads without
the need of intermediary buffers.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Add support for read only mib objects from RFC4444.
Signed-off-by: Lynne Morrison <lynne@voltanet.io>
Signed-off-by: Karen Schoener <karen@voltanet.io>
Problem:
Prefix-list with mulitiple rules, an update to
a rule/sequence with different prefix/prefixlen
reset prefix-list next-base pointer to avoid
having stale value.
In some case the old next-bast's reference leads
to an assert in tri (trie_install_fn ) add.
bt:
(object=0x55576a4c8a00, updptr=0x55576a4b97e0) at lib/plist.c:560
(plist=0x55576a4a1770, pentry=0x55576a4c8a00) at lib/plist.c:585
(ple=0x55576a4c8a00) at lib/plist.c:745
(args=0x7fffe04beb50) at lib/filter_nb.c:1181
Solution:
Reset prefix-list next-base pointer whenver a
sequence/rule is updated.
Ticket:CM-33109
Testing Done:
Signed-off-by: Chirag Shah <chirag@nvidia.com>
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
In prefix-list nortbound callback's validation
phase, use type as enum rather string for better
performance.
Signed-off-by: Chirag Shah <chirag@nvidia.com>
Following patch
" lib: disallow access list duplicated values"
introduce a libyang dnode iterator for every prefix-list
config which adds an overhead of traversal all prefix dnodes
and degrades the performance in scaled prefix-list config.
This check is not necessary in prefix-list northbound callbacks
as there won't be a case where prefix-list config comes to nb
callback without sequence number.
The dup check is only necessary for the vtysh case for backward
compatiblity reason where cli can be accepted without sequence number.
Ticket: CM-32035
Reviewed By: CCR-11096
Testing Done:
Signed-off-by: Chirag Shah <chirag@nvidia.com>
Remove when statements from prefix-list yang OM,
and do the same check in frr validation phase.
This helps a bit in perfomance of prefix-lists
scale config.
Ticket:CM-32035
Reviewed By:CCR-11096
Testing Done:
Signed-off-by: Chirag Shah <chirag@nvidia.com>
Instead of crashing, print "NULL" when printfrr callback for
nexthops is called for a NULL nexthop argument.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Example:
```
show yang operational-data /frr-routing:routing/control-plane-protocols/control-plane-protocol[type='frr-staticd:staticd'][name='staticd'][vrf='default'] staticd
```
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Apparently you can do `#__VA_ARGS__` and it actually does something
sensible, so here we go recording the format parameters for log messages
into the xref.
This allows some more checking in xrelfo.py, e.g. hints to use `%pFX`
and co.
Signed-off-by: David Lamparter <equinox@diac24.net>
This adds _clippy.ELFFile, which provides a fast wrapper around libelf.
The API is similar to / a subset of pyelfutils, which unfortunately is
painfully slow (to the tune of minutes instead of seconds.)
The idea is that xrefs can be read out of ELF files by reading out the
"xref_array" section or "FRRouting/XREF" note.
Signed-off-by: David Lamparter <equinox@diac24.net>
When the control plane protocol is created, the vrf structure is
allocated, and its address is stored in the northbound node.
The vrf structure may later be deleted by the user, which will lead to
a stale pointer stored in this node.
Instead of this, allow daemons that use the vrf pointer to register the
dependency between the control plane protocol and vrf nodes. This will
guarantee that the nodes will always be created and deleted together, and
there won't be any stale pointers.
Add such registration to staticd and pimd.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
When handling a large number of events at one time
FRR will call monotime and getrusage 2 times for each
event. With this change modify the code to change
this to (X events / 2) + 1 calls of getrusage and monotime
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Since some recent commit, building c++ code attempting to use zlog_debug
(or any other level) would fail with the following complaint:
lib/zlog.h:91:3: sorry, unimplemented: non-trivial designated
initializers not supported
};
^
lib/zlog.h:105:26: note: in expansion of macro ‘_zlog_ref’
#define zlog_debug(...) _zlog_ref(LOG_DEBUG, __VA_ARGS__)
This is due to out-of-order initialization of the xrefdata struct
fields. Setting them all in the order in which they are defined
fixes the issue.
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
When running clippy, the main function in it's
error path could leak the memory pointed to by name.
Fix this. This was/is reported by clang SA.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Only ask the event-loop poll() to awaken if a newly-added timer
actually might have changed the required timeout. Also compute
timer deadline outside of mutex locks.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
The existing code was using the oid2in_addr API to copy IPv6
addresses passing an IPv6 length. Create a utility to do this
properly and avoid annoying coverity with type checking.
Signed-off-by: Pat Ruddy <pat@voltanet.io>
Adding agentx_enabled hook.
This permits the main LDP process to signal the lde and ldpe
processes when agentx is enabled.
Signed-off-by: Karen Schoener <karen@voltanet.io>
CR, NL and CRNL are all OK, but CRNL shouldn't get treated as 2
newlines (which causes an empty command to be executed => empty prompt
line.)
Signed-off-by: David Lamparter <equinox@diac24.net>
