These commands don't belong in the BGP_IPV6L_NODE node anymore. A similar
change was done for BGP_IPV4L_NODE in commit 9bedbb1e5.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
The json option for displaying a bgp table
with route Distinguishers in it was not properly
working. This code cleans this issue up.
Additionally attempt to make the code a bit
easier to read and handle.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Perf results at scale( >1k peers) showed a non-trivial
amount of time spent in bgp_multiaccess_check_v4. Upon
function examination we are looking up the nexthops
connected node in each call as well as having to unlock
it after each iteration. Rewrite to lookup the nexthop
node once.
This should reduce the node lookup by aproximately 1/2
which should yield some performance results. There are
probably better things to do here but would require
deeper thought.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This fixes the broken indentation of several foreach loops throughout
the code.
From clang's documentation[1]:
ForEachMacros: A vector of macros that should be interpreted as foreach
loops instead of as function calls.
[1] http://clang.llvm.org/docs/ClangFormatStyleOptions.html
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
VARIABLE tokens must be all uppercase, this allows us to support WORD
tokens that begin with an uppercase letter. The "Null0" keyword is an
example of where this is needed.
The only VARIABLE we had that wasn't already all uppercase was
ASN:nn_or_IP-address:nn
bgp_route.c:6393:7: error: ‘len’ may be used uninitialized in this function
gcc 5.4.0 isn't intelligent enough to notice it's set on all paths.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Some of this was so egregiously stupid, I couldn't look at it without
gouging my eyes out...
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
afi_header_vty_out() is easily replaced with vty_frame(), which means we
can drop a whole batch of "int *write" args as well as the entirety of
bgp_config_write_family_header().
=> AFI/SAFI config writing is now a lot simpler.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Some differences compared to the old API:
* Now the redistributed routes are sent using address-family
independent messages (ZEBRA_REDISTRIBUTE_ROUTE_ADD and
ZEBRA_REDISTRIBUTE_ROUTE_DEL). This allows us to unify the ipv4/ipv6
zclient callbacks in the client daemons and thus remove a lot of
duplicate code;
* Now zebra sends all nexthops of the redistributed routes to the client
daemons, not only the first one. This shouldn't have any noticeable
performance implications and will allow us to remove an ugly exception
we had for ldpd (which needs to know all nexthops of the redistributed
routes). The other client daemons can simply ignore the nexthops if
they want or consult just the first one (e.g. ospfd/ospf6d/ripd/ripngd).
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
There are several code paths that dump nodes to the queue for route
processing in a loop. This patch tries to reduce memory allocations/freeing
(work item, list node) and thread scheduling overhead by batching the nodes
in a simple queue list.
In the past when route processing wasn't event driven (bgp_scan()), this used
to have a noticeable impact in table loading, convergence time and memory heap
fragmentation due to reduced alloc's/free's.
Signed-off-by: Jorge Boncompte <jbonor@gmail.com>
When the MAC changes for a local neighbor, ensure that the neighbor data
structure as well as the link between the neighbor and MAC data structures
is updated correctly.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Ticket: CM-17565
Reviewed By: CCR-6605
Testing Done: Manual, evpn-smoke
Ensure that the registration for the "in" label for a unicast prefix
is done only in the default instance. The zebra label manager as well
as other code in BGP only has support for assigning labels in the
default instance.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Daniel Walton <dwalton@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Ticket: CM-17110
Reviewed By: CCR-6588
Testing Done: Manual tests, mpls
There are two parts to this commit:
1. create a database of self tunnel-ip for used in martian nexthop check
In a CLAG setup, the tunnel-ip (VNI UP) notification comes before the clag-anycast-ip comes up in the system.
This was causing our self next hop check to fail and we were instaling routes with martian nexthop in zebra.
We need to keep this info in a seperate database for all local tunnel-ip.
This database will be used in parallel with the self next hop database to martian nexthop checks.
2. When a local VNI comes up, update the tunnel-ip database and filter routes in the RD table if necessary
In case of EVPN we might receive routes from clag peer before the clag-anycast ip and VNI is up on the system.
We will store the routes in the RD table for later processing.
When VNI comes UP, we loop thorugh all the routes and install them in zebra if required.
However, we were missing the martian nexthop check in this code path.
From now onwards, when a VNI comes UP,
we will first update the tunnel-ip database
We then loop through all the routes in RD table and apply martian next hop filter if required.
Things not covered in this commit but are required:
This processing is needed in general when an address becomes a connected address.
We need to loop through all the routes in BGP and apply martian nexthop filter if necessary.
This will be taken care in a seperate bug
Ticket:CM-17271/CM-16911
Reviewed By: ccr-6542
Testing Done: Manual
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
When issuing a 'show ip bgp' command and the nexthop is
a interface, if the interface name was greater than 7 characters
we would arbitrarily start a new-line and setup the next
line to start at the wrong spot.
Modify the interface field to allow 16 characters than 7( to
match v6 display ), and if the interface name is greater than
16 characters properly setup the next line for display
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
1. provision to add match clause with a vni under route-map
Ticket: CM-16349
Review: CCR-6190
Unit-test: Manual (logs attached to ticket)
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
1. Added support to create mac filters
2. Enabled route-map commands for EVPN address family
3. Provision to add mac filters under match clause in route-maps
Ticket: CM-16349
Review: CCR-6190
Unit-test: Manual (logs attached to ticket)
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
If you are doing multipath in a VRF and bounce one of the multipaths for
a prefix, bgp is not updating the zebra entry for that prefix with the
new multipaths. We start with:
cel-redxp-10# show bgp vrf RED ipv4 unicast 6.0.0.16/32
BGP routing table entry for 6.0.0.16/32
Paths: (4 available, best #4, table RED)
Advertised to non peer-group peers:
spine-1(swp1) spine-2(swp2) spine-3(swp3) spine-4(swp4)
104 65104 65002
fe80::202:ff:fe00:2d from spine-4(swp4) (6.0.0.12)
(fe80::202:ff:fe00:2d) (used)
Origin incomplete, localpref 100, valid, external, multipath, bestpath-from-AS 104
AddPath ID: RX 0, TX 21
Last update: Tue Aug 1 18:28:33 2017
102 65104 65002
fe80::202:ff:fe00:25 from spine-2(swp2) (6.0.0.10)
(fe80::202:ff:fe00:25) (used)
Origin incomplete, localpref 100, valid, external, multipath, bestpath-from-AS 102
AddPath ID: RX 0, TX 20
Last update: Tue Aug 1 18:28:33 2017
103 65104 65002
fe80::202:ff:fe00:29 from spine-3(swp3) (6.0.0.11)
(fe80::202:ff:fe00:29) (used)
Origin incomplete, localpref 100, valid, external, multipath, bestpath-from-AS 103
AddPath ID: RX 0, TX 17
Last update: Tue Aug 1 18:28:33 2017
101 65104 65002
fe80::202:ff:fe00:21 from spine-1(swp1) (6.0.0.9)
(fe80::202:ff:fe00:21) (used)
Origin incomplete, localpref 100, valid, external, multipath, bestpath-from-AS 101, best
AddPath ID: RX 0, TX 8
Last update: Tue Aug 1 18:28:33 2017
cel-redxp-10#
cel-redxp-10# show ip route vrf RED 6.0.0.16/32
Routing entry for 6.0.0.16/32
Known via "bgp", distance 20, metric 0, vrf RED, best
Last update 00:00:25 ago
* fe80::202:ff:fe00:21, via swp1
* fe80::202:ff:fe00:25, via swp2
* fe80::202:ff:fe00:29, via swp3
* fe80::202:ff:fe00:2d, via swp4
cel-redxp-10#
And then on spine-1 we bounce all peers
spine-1# clear ip bgp *
spine-1#
On the leaf (cel-redxp-10) we remove the route from spine-1
cel-redxp-10# show ip route vrf RED 6.0.0.16/32
Routing entry for 6.0.0.16/32
Known via "bgp", distance 20, metric 0, vrf RED, best
Last update 00:00:01 ago
* fe80::202:ff:fe00:25, via swp2
* fe80::202:ff:fe00:29, via swp3
* fe80::202:ff:fe00:2d, via swp4
cel-redxp-10#
So far so good. The problem is when the session to spine-1 comes back up
bgp will mark the flag from spine-1 as `multipath` but does not update
zebra. We end up in a state where BGP has 4 paths flags as multipath but
only 3 paths are in the RIB.
This reverts commit c14777c6bf.
clang 5 is not widely available enough for people to indent with. This
is particularly problematic when rebasing/adjusting branches.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
The label initializer & nhrpd variable are just to shut up GCC 7,
the other two are actual bugs.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
This allows frr-reload.py (or anything else that scripts via vtysh)
to know if the vtysh command worked or hit an error.
Most of the attributes in 'struct attr_extra' allow for
the more interesting cases of using bgp. The extra
overhead of managing it will induce errors as we add
more attributes and the extra memory overhead is
negligible on anything but full bgp feeds.
Additionally this greatly simplifies the code for
the handling of data.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
bgpd: Fix missing label set
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Core EVPN route handling functionality. This includes support for the
following:
- interface with zebra to learn about local VNIs and MACIPs as well as
to install remote VTEPs (per VNI) and remote MACIPs
- create/update/delete EVPN type-2 and type-3 routes
- attribute creation, route selection and install
- route handling per VNI and for the global routing table
- parsing of received EVPN routes and handling by route type
- encoding attributes for EVPN routes and EVPN prefix creation (for
Updates)
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Daniel Walton <dwalton@cumulusnetworks.com>
Ensure that the AFI/SAFI is relevant to the FIB before attempting to install
or remove the route from zebra.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Ensure that the check for martian next hop is correct, including for MP
nexthops, if IPv4.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
labeled-unicast routes are installed in the unicast table, to make
troubleshooting easier we need "show bgp ipv4 labeled-unicast x.x.x.x"
to show the x.x.x.x route in the unicast table.
* Pass ->text to functions that now do full string matching
* Remove cases for l2vpn and evpn where they cannot occur
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
- All ipv4 labeled-unicast routes are now installed in the ipv4 unicast
table. This allows us to do things like take routes from an ipv4
unicast peer, allocate a label for them and TX them to a ipv4
labeled-unicast peer. We can do the opposite where we take routes from
a labeled-unicast peer, remove the label and advertise them to an ipv4
unicast peer.
- Multipath over a labeled route and non-labeled route is not allowed.
- You cannot activate a peer for both 'ipv4 unicast' and 'ipv4
labeled-unicast'
- The 'tag' variable was overloaded for zebra's route tag feature as
well as the mpls label. I added a 'mpls_label_t mpls' variable to
avoid this. This is much cleaner but resulted in touching a lot of
code.
Based on suggestions made in the FRR technical meeting, making the
label-index range 2^20-16 for the max label size minus the reserved
labels.
Ticket: CM-16513
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Added the ability to set the label-index value based on criteria other
than the network statement. Manual testing looks good and added to the
ticket.
Ticket: CM-16513
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Reviewed-by: CCR-6339
Problem reported with the inability to define "network x❌x::/64 label-index" to
the config. Found that the install_element was pointing to the wrong node.
Ticket: CM-16615
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Problem seen in testing import-check using labeled-unicast address-family. When
transitioning from "no bgp network import-check" to "bgp network import-check",
previously installed networks were not removed. This fix resolves this.
Ticket: CM-16512
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Modify EVPN prefix to use the generic IP address structure. Add support
for EVPN type-2 and type-3 prefix dump. Fix references to modified fields
as needed.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Static encap routes don't have an MPLS label. Also, use %u instead of
%d to print the label.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
The FSF's address changed, and we had a mixture of comment styles for
the GPL file header. (The style with * at the beginning won out with
580 to 141 in existing files.)
Note: I've intentionally left intact other "variations" of the copyright
header, e.g. whether it says "Zebra", "Quagga", "FRR", or nothing.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
These commands were causing bgpd to crash if a static VPN route was
configured.
While here, fix a bug in bgp_static_add() and bgp_static_delete().
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Pass pointer to pointer instead of assigning by return value. See
previous commit message.
To ensure that the behavior stays functionally correct, any assignments
with the result of a thread_add* function have been transformed to set
the pointer to null before passing it. These can be removed wherever the
pointer is known to already be null.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
The way thread.c is written, a caller who wishes to be able to cancel a
thread or avoid scheduling it twice must keep a reference to the thread.
Typically this is done with a long lived pointer whose value is checked
for null in order to know if the thread is currently scheduled. The
check-and-schedule idiom is so common that several wrapper macros in
thread.h existed solely to provide it.
This patch removes those macros and adds a new parameter to all
thread_add_* functions which is a pointer to the struct thread * to
store the result of a scheduling call. If the value passed is non-null,
the thread will only be scheduled if the value is null. This helps with
consistency.
A Coccinelle spatch has been used to transform code of the form:
if (t == NULL)
t = thread_add_* (...)
to the form
thread_add_* (..., &t)
The THREAD_ON macros have also been transformed to the underlying
thread.c calls.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Crash uncovered when workqueue item was pulled with safi set to 7
(SAFI_LABELED_UNICAST) without labled-unicast being configured.
Also fixed minor issue removing aggregate-address command due to bad
index.
Ticket: CM-16169
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
If you specified A.B.C.D, the code would still try to
read A.B.C.D/M and not find it and pass in a NULL pointer
which crashed the code.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
The initial implementation was against draft-keyupate-idr-bgp-prefix-sid-02
This updates our label-index implementation up to draft-ietf-idr-bgp-prefix-sid-05
- changed BGP_ATTR_LABEL_INDEX to BGP_ATTR_PREFIX_SID
- since there are multiple TLVs in BGP_ATTR_PREFIX_SID you can no longer
rely on that flag to know if there is a label-index for the path. I
changed bgp_attr_extra_new() to init the label_index to
BGP_INVALID_LABEL_INDEX
- put some placeholder code in for the other two TLVs (IPv6 and
Originator SRGB)
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
- cleaned up the "show bgp ipv4 labeled-unicast x.x.x.x" output
- fixed some json keys to use camelCase
- bgp_attr_label_index() was clearing BGP_ATTR_LABEL_INDEX because it
was comparing mp_update->afi against SAFI_LABELED_UNICAST instead of
mp_update->safi
- added BGP_ATTR_LABEL_INDEX to attr_str
1) Some commands were installed in the wrong node
2) Fix output to show labeled information to correctly display
3) Whitespace issue in route-map command
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
* Fix a segfault when the "show bgp large-community" command is given
without any optional large communities;
* Fix parsing of optional large communities. Without this fix a
"Large-community malformed" error is shown even for valid large
communities.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Implement BGP Prefix-SID IETF draft to be able to signal a labeled-unicast
prefix with a label index (segment ID). This makes it easier to deploy
global MPLS labels with BGP, even without other aspects of Segment Routing
implemented.
This patch implements the handling of the BGP-Prefix-SID Label Index
attribute. When received from a peer and the index is acceptable, the local
label is picked up from the SRGB and is programmed as the incoming label as
well as advertised to peers. If the index is not acceptable, no local label
is assigned. The outgoing label will always be the one advertised by the
downstream neighbor.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Implement BGP Prefix-SID IETF draft to be able to signal a labeled-unicast
prefix with a label index (segment ID). This makes it easier to deploy
global MPLS labels with BGP, even without other aspects of Segment Routing
implemented.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Implement BGP Prefix-SID IETF draft to be able to signal a labeled-unicast
prefix with a label index (segment ID). This makes it easier to deploy
global MPLS labels with BGP, even without other aspects of Segment Routing
implemented.
This patch implements configuration of the global label block (SRGB) and
configuration of a label-index for a network in BGP.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Implement support for negotiating IPv4 or IPv6 labeled-unicast address
family, exchanging prefixes and installing them in the routing table, as
well as interactions with Zebra for FEC registration. This is the
implementation of RFC 3107.
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Implement support for activating the labeled-unicast address family in
BGP and relevant configuration for this address family.
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Code inspection showed a bunch more spots where
we were assigning the safi inside of a if statement
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When outputting routes associated with a 'struct bgp'
do not force the safi to bee SAFI_EVPN and cause output
to be hosed.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The original code on shutdown assumed a 'forced' mode
if there was no process_main_queue. This construct
was violated by commit 2e02b9b2d1
due to not fully understanding the shutdown process.
If we are shutting down, don't store work to do later,
just gracefully don't do it.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The buffer needs to be set to length 0 if nothing is written into
it, otherwise bgpd will log uninitialized memory, disclosing information
and possibly leading to a crash.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
As the prefix call function for mac handling has prefix_ prepended
before, the change must be propagated to all locations where those
functions are called.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
EVPN code adaptation to replace old mac string internal utility with the
new one available in lib folder.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Transmission and Reception routines have a part of code that is
conditionnally compiled to the usage of HAVE_EVPN. Also, each time a
subfield of prefix evpn is reached, like in configuration also, then a
conditionnaly compilation with HAVE_EVPN is used.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
This commit fixes the nexthop display behaviour when an evpn entry is
matched. The commit handles both cases where IPv4 or IPv6 nexthop is
detected.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
In case a manual set of MPLS, ENCAP, or EVPN entry is set, then the
nexthop attribute localted in attr->extra structure must be changed too.
In standard cases, where IPv4 IGP nexthop address is picked up, the same
address ie chosen.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
A new vty command available under evpn address family. This command
takes following format:
(af-evpn)# [no] network <A.B.C.D/M|X:X::X:X/M> rd ASN:nn_or_IP-address:nn ethtag WORD
label WORD esi WORD gwip A.B.C.D routermac WORD
[route-map WORD]
Among new parameters, ethtag stands for the ethernet tag indentifier.
ESI stands for the ethernet segment identifier, and must be entered in
following format: 00:11:22:33:44:55:66:77:88:99.
gwip stands for the gateway IP address contained in RT5 message. A
check is done on that value since if gwip is ipv4, then ip prefix must
be ipv4. The same for ipv6.
RouterMAc is the gateway mac address sent as extended community
attribute.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
L2VPN route prefix are composed of ethtag, mac address and ip address.
vty command "show bgp l2vpn rd <>" show macip prefix in the following
template: [ethtag][macaddress/len][ipaddress/len]
Signed-off-by: Julien Courtat <julien.courtat@6wind.com>
e
This patch introduces show show bgp evpn commands to dump
NLRI entries configured or received on BGP, related to EVPN
New command introduced is the following:
show [ip] bgp l2vpn evpn [all | rd <rd name> ] [overlay]
Like for MPLS, similar set of commands is added for EVPN:
show [ip] bgp l2vpn evpn [all|rd <RDNAME>]
show [ip] bgp l2vpn evpn all neighbor <NEIGHBOR> routes
show [ip] bgp l2vpn evpn all neighbor <NEIGHBOR> advertised-routes
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
For each received routermac extended community, the mac address is
copied into routermac extended community context. For each emission,
a check is done against routermac extended community, if L2VPN is
enabled. If enabled, the extended community is appended.
Signed-off-by: Philippe Gubiert <philippe.guibert@6wind.com>
This field can be either IPv4 or IPv6 address and is filled in in
bgp_static configuration structure.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
As per draft-ietf-idr-tunnel-encaps-02, section 3.2.1, BGP Encap
attribute supports vxlan tunnel type. A new tunnel attribute has been
appended to subtlv list, describing the vxlan network identifier to
be used for the routing information of the BGP update message.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
The commit introduces the changes to be done to carry route type 5 EVPN
information in bgp extra attribute information. The commit also handles
the update processing for route type 5 information, including ESI,
gatewayIP and label information.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
This patch introduces code to receive a NLRI message with route type
5, as defined in draft-ietf-bess-evpn-prefix-advertisement-02. It
It increases the number of parameters to extract from the NLRI and
to store into bgp extra information structure. Those parameters are
the ESI (ethernet segment identifier), the gateway IP Address (which
acts like nexthop attribute but is contained inside the NLRI itself)
and the ethernet tag identifier ( that acts for the VXLan Identifier)
This patch updates bgp_update() and bgp_withdraw() api, and then does the
necessary adapations for rfapi.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
To handle BGP NLRI EVPN messages, bgp is modified to handle AFI_L2VPN
and SAFI_EVPN values.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
This fix addresses these things:
1) Clean up documentation as requested
2) Fix a wrong search for "exact-match"
3) Fix possible crash.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
- route_set_lcommunity would do nothing (and leak memory) if attr->extra
wasn't up yet
- an if() arch in bgp_show_table() was duplicated (with no effect)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
(to match surrounding code)
"git diff -w" should be almost empty.
Copyright edited to say FRR, this is not GNU Zebra :)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
When bgp_vty_find_and_parse_afi_safi_vrf detects
a invalidly named vrf, it warns the user. There
is no need for the calling function to warn
again.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
