The return value can be ignored because in case of error both the 'afi'
and 'safi' variables are set to the invalid values (AFI_MAX, SAFI_MAX),
and the invalid values are handled properly afterwards in the 'default'
blocks.
Signed-off-by: F. Aragon <paco@voltanet.io>
This work is derived from a work done by China-Telecom.
That initial work can be found in [0].
As the gap between frr and quagga is important, a reworks has been
done in the meantime.
The initial work consists of bringing the following:
- Bringing the client side of flowspec.
- the enhancement of address-family ipv4/ipv6 flowspec
- partial data path handling at reception has been prepared
- the support for ipv4 flowspec or ipv6 flowspec in BGP open messages,
and the internals of BGP has been done.
- the memory contexts necessary for flowspec has been provisioned
In addition to this work, the following has been done:
- the complement of adaptation for FS safi in bgp code
- the code checkstyle has been reworked so as to match frr checkstyle
- the processing of IPv6 FS NLRI is prevented
- the processing of FS NLRI is stopped ( temporary)
[0] https://github.com/chinatelecom-sdn-group/quagga_flowspec/
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Signed-off-by: jaydom <chinatelecom-sdn-group@github.com>
The following types are nonstandard:
- u_char
- u_short
- u_int
- u_long
- u_int8_t
- u_int16_t
- u_int32_t
Replace them with the C99 standard types:
- uint8_t
- unsigned short
- unsigned int
- unsigned long
- uint8_t
- uint16_t
- uint32_t
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
1. Change hostname_get to cmd_hostname_get
2. Change domainname_get to cmd_domainname_get
3. New API to set domainname
3. Provide a CLI command to set domainname
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
This reverts commit c14777c6bf.
clang 5 is not widely available enough for people to indent with. This
is particularly problematic when rebasing/adjusting branches.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
log.c provides functionality for associating a constant (typically a
protocol constant) with a string and finding the string given the
constant. However this is highly delicate code that is extremely prone
to stack overflows and off-by-one's due to requiring the developer to
always remember to update the array size constant and to do so correctly
which, as shown by example, is never a good idea.b
The original goal of this code was to try to implement lookups in O(1)
time without a linear search through the message array. Since this code
is used 99% of the time for debugs, it's worth the 5-6 additional cmp's
worst case if it means we avoid explitable bugs due to oversights...
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
The FSF's address changed, and we had a mixture of comment styles for
the GPL file header. (The style with * at the beginning won out with
580 to 141 in existing files.)
Note: I've intentionally left intact other "variations" of the copyright
header, e.g. whether it says "Zebra", "Quagga", "FRR", or nothing.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Implement support for negotiating IPv4 or IPv6 labeled-unicast address
family, exchanging prefixes and installing them in the routing table, as
well as interactions with Zebra for FEC registration. This is the
implementation of RFC 3107.
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
To handle BGP NLRI EVPN messages, bgp is modified to handle AFI_L2VPN
and SAFI_EVPN values.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Introduce internal and IANA defintions for AFI/SAFI and mapping
functions and modify code to use these. This refactoring will
facilitate adding support for other AFI/SAFI whose IANA values
won't be suitable for internal data structure definitions (e.g.,
they are not contiguous).
The commit adds some fixes related to afi/safi testing with 'make check
' command.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Ticket: CM-11416
Reviewed By: CCR-3594 (mpls branch)
Testing Done: Not tested now, tested earlier on mpls branch
Enhance struct bgp to add a new flag BGP_FLAG_GR_PRESERVE_FWD, which
allow to set the Preserve State F bit of Graceful Restart capability in
OPEN messages.
Signed-off-by: Julien Courtat <julien.courtat@6wind.com>
This is a rather large mechanical commit that splits up the memory types
defined in lib/memtypes.c and distributes them into *_memory.[ch] files
in the individual daemons.
The zebra change is slightly annoying because there is no nice place to
put the #include "zebra_memory.h" statement.
bgpd, ospf6d, isisd and some tests were reusing MTYPEs defined in the
library for its own use. This is bad practice and would break when the
memtype are made static.
Acked-by: Vincent JARDIN <vincent.jardin@6wind.com>
Acked-by: Donald Sharp <sharpd@cumulusnetworks.com>
[CF: rebased for cmaster-next]
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
lib/zebra.h has FILTER_X #define's. These do not belong there.
Put them in lib/filter.h where they belong.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
(cherry picked from commit 0490729cc033a3483fc6b0ed45085ee249cac779)
Forward port of a fix from upstream introduced
the need to have data on the new capability codes
that have been introduced.
This commit adds in the missing capabilities.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Daniel Walton <dwalton@cumulusnetworks.com>
There wasn't much missing for VPNv6 to begin with; just a few bits of
de- & encoding and a few lists to be updated.
Signed-off-by: Lou Berger <lberger@labn.net>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
[Editorial note: Signed-off-by may imply an authorship claim, but need not]
Edited-by: Paul Jakma <paul.jakma@hpe.com> / <paul@jakma.org>
(cherry picked from commit 9da04bca0e994ec92b9242159bf27d89c6743354)
Conflicts:
bgpd/bgp_attr.c
bgpd/bgp_mplsvpn.c
bgpd/bgpd.c
* bgp_open.c: cap_minsize should be CAPABILITY_CODE_RESTART_LEN for RESTART
not 6.
(cherry picked from commit 7748fdc757a2181649dd4956f2767545673ef28d)
This code change does two things:
1) Removes ZEBRA_AFI_XXX #defines since they were redundant information
2) Switches afi_t to an enumerated type so that the compiler
can do a bit more compile time checking.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
(cherry picked from commit f3cfc46450cccc5ac035a5a97c5a1a5484205705)
Conflicts:
bgpd/bgp_open.c
bgpd/bgp_open.h
bgpd/bgp_routemap.c
* bgp_open.c: (cap_modsizes) Table of multiple a capability's data size
should fall on, if applicable.
(bgp_capability_parse) Check the header lengthcap_modsizes should fall on.
Inspiration from Cumulus bgpd-capability-cleanup.patch patch, with a
slightly different approach.
Acked-by: Donald Sharp <sharpd@cumulusnetworks.com>
(cherry picked from commit 4078f2eb7a3a94ddb30cfd8b76b054e790aab524)
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Don Slice <dslice@cumulusnetworks.com>
Reviewed-by: Daniel Walton <dwalton@cumulusnetworks.com>
Silently ignore (without sending a Notification) unexpected values
of AFI, SAFI or Nexthop AFI received in the Extended Next Hop Encoding
capability (defined in RFC 5549). While this RFC only defines certain
values as allowed, that may be changed by a future spec.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Daniel Walton <dwalton@cumulusnetworks.com>
Ticket: CM-5975
Reviewed By: CCR-3947
Testing Done: test_fuzz 1.11, 1.12 and 1.13
Ensure that when the received OPEN message has errors, NOTIFICATION is
generated with the proper error code.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Daniel Walton <dwalton@cumulusnetworks.com>
Ticket: CM-5974
Reviewed By: CCR-3945
Testing Done: Manual
Note: This fix should be sent upstream.
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Vivek Venkataraman <vivek@cumulusnetworks.com
Ticket: CM-8014
This implements addpath TX with the first feature to use it
being "neighbor x.x.x.x addpath-tx-all-paths".
One change to show output is 'show ip bgp x.x.x.x'. If no addpath-tx
features are configured for any peers then everything looks the same
as it is today in that "Advertised to" is at the top and refers to
which peers the bestpath was advertise to.
root@superm-redxp-05[quagga-stash5]# vtysh -c 'show ip bgp 1.1.1.1'
BGP routing table entry for 1.1.1.1/32
Paths: (6 available, best #6, table Default-IP-Routing-Table)
Advertised to non peer-group peers:
r1(10.0.0.1) r2(10.0.0.2) r3(10.0.0.3) r4(10.0.0.4) r5(10.0.0.5) r6(10.0.0.6) r8(10.0.0.8)
Local, (Received from a RR-client)
12.12.12.12 (metric 20) from r2(10.0.0.2) (10.0.0.2)
Origin IGP, metric 0, localpref 100, valid, internal
AddPath ID: RX 0, TX 8
Last update: Fri Oct 30 18:26:44 2015
[snip]
but once you enable an addpath feature we must display "Advertised to" on a path-by-path basis:
superm-redxp-05# show ip bgp 1.1.1.1/32
BGP routing table entry for 1.1.1.1/32
Paths: (6 available, best #6, table Default-IP-Routing-Table)
Local, (Received from a RR-client)
12.12.12.12 (metric 20) from r2(10.0.0.2) (10.0.0.2)
Origin IGP, metric 0, localpref 100, valid, internal
AddPath ID: RX 0, TX 8
Advertised to: r8(10.0.0.8)
Last update: Fri Oct 30 18:26:44 2015
Local, (Received from a RR-client)
34.34.34.34 (metric 20) from r3(10.0.0.3) (10.0.0.3)
Origin IGP, metric 0, localpref 100, valid, internal
AddPath ID: RX 0, TX 7
Advertised to: r8(10.0.0.8)
Last update: Fri Oct 30 18:26:39 2015
Local, (Received from a RR-client)
56.56.56.56 (metric 20) from r6(10.0.0.6) (10.0.0.6)
Origin IGP, metric 0, localpref 100, valid, internal
AddPath ID: RX 0, TX 6
Advertised to: r8(10.0.0.8)
Last update: Fri Oct 30 18:26:39 2015
Local, (Received from a RR-client)
56.56.56.56 (metric 20) from r5(10.0.0.5) (10.0.0.5)
Origin IGP, metric 0, localpref 100, valid, internal
AddPath ID: RX 0, TX 5
Advertised to: r8(10.0.0.8)
Last update: Fri Oct 30 18:26:39 2015
Local, (Received from a RR-client)
34.34.34.34 (metric 20) from r4(10.0.0.4) (10.0.0.4)
Origin IGP, metric 0, localpref 100, valid, internal
AddPath ID: RX 0, TX 4
Advertised to: r8(10.0.0.8)
Last update: Fri Oct 30 18:26:39 2015
Local, (Received from a RR-client)
12.12.12.12 (metric 20) from r1(10.0.0.1) (10.0.0.1)
Origin IGP, metric 0, localpref 100, valid, internal, best
AddPath ID: RX 0, TX 3
Advertised to: r1(10.0.0.1) r2(10.0.0.2) r3(10.0.0.3) r4(10.0.0.4) r5(10.0.0.5) r6(10.0.0.6) r8(10.0.0.8)
Last update: Fri Oct 30 18:26:34 2015
superm-redxp-05#
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Ticket: CM-7926
There was a crash from not NULLing out peer->hostname but I cleaned
up a bunch of other suspect ones as well.
This patch adds a hostname capability. The node's hostname and
domainname are exchanged in the new capability and used in show command
outputs based on a knob enabled by the user. The hostname and domainname
can be a maximum of 64 chars long, each.
Signed-off-by: Dinesh G Dutt <ddutt@cumulusnetworks.com>
Reviewed-by: Daniel Walton <dwalton@cumulusnetworks.com>
Reviewed-by: Vivek Venkataraman <vivek@cumulusnetworks.com>
Ticket: CM-5660
Reviewed By: CCR-2563
Testing Done:
Ticket: CM-6789
Reviewed By: CCR-3263
Testing Done: Manual Testing and smoke tests
Whenever some sort of output is encountered, added a json version with
proper logic as well.
BGP: Make Capability handling a little more robust
This patch does two things:
- Returns the right sub error code when a malformed capability is rcvd
- Verifies that the capability length is a multiple of an individual unit
Signed-off-by: Dinesh G Dutt <ddutt@cumulusnetworks.com>
Reviewed-by: Vivek Venkataraman <vivek@cumulusnetworks.com>
