```
exit1-debian-9# show ip route 172.16.16.1/32
Routing entry for 172.16.16.1/32
Known via "bgp", distance 20, metric 0, best
Last update 00:00:28 ago
* 192.168.0.2, via eth1, weight 1
AS-Path : 65003
Communities : first 65001:2 65001:3
Large-Communities: 65001:1:1 65001:1:2 65001:1:3
Selection reason : First path received
```
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
PIM is going to need to be able to send down the address it is
trying to resolve in the multicast rib. We need a way to signal
this to the end developer. Start the conversion by adding the
ability to have a safi. But only allow SAFI_UNICAST at the moment.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The entirety of the import checking no longer needs to be
in zebra as that no-one is calling it. Remove the code.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Because vrf backend may be based on namespaces, each vrf can
use in the [16-(2^32-1)] range table identifier for daemons that
request it. Extend the table manager to be hosted by vrf.
That possibility is disabled in the case the vrf backend is vrflite.
In that case, all vrf context use the same table manager instance.
Add a configuration command to be able to configure the wished
range of tables to use. This is a solution that permits to give
chunks to bgp daemon when it works with bgp flowspec entries and
wants to use specific iptables that do not override vrf tables.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
We should not be using `case default` with an enumerated type
This prevents the developer of new cases from knowing where
they need to fix by just compiling.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Description:
Change is intended for fixing the following issues related to vrf route leaking:
Routes with special nexthops i.e. blackhole/sink routes when imported,
are not programmed into the FIB and corresponding nexthop is set as 'inactive',
nexthop interface as 'unknown'.
While importing/leaking routes between VRFs, in case of special nexthop(ipv4/ipv6)
once bgp announces route(s) to zebra, nexthop type is incorrectly set as
NEXTHOP_TYPE_IPV6_IFINDEX/NEXTHOP_TYPE_IFINDEX
i.e. directly connected even though we are not able to resolve through an interface.
This leads to nexthop_active_check marking nexthop !NEXTHOP_FLAG_ACTIVE.
Unable to find the active nexthop(s), route is not programmed into the FIB.
Whenever BGP leaks routes, set the correct nexthop type, so that route gets resolved
and correctly programmed into the FIB, in the imported vrf.
Co-authored-by: Kantesh Mundaragi <kmundaragi@vmware.com>
Signed-off-by: Iqra Siddiqui <imujeebsiddi@vmware.com>
Basically, this is handled by JSON-C library. I've compiled with the
latest release of json-c and it works well.
Didn't test with various distribution versions, but this change is kinda
dependend from the json-c lib version the distra has.
Before:
```
"192.168.100.1\/32":[
{
"prefix":"192.168.100.1\/32",
```
After:
```
"192.168.100.1/32":[
{
"prefix":"192.168.100.1/32",
```
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
With this patch, zclient can intall seg6 rotues when
they set properties "nh_seg6_segs" on struct nexthop
and set ZEBRA_FLAG_SEG6_ROUTE on zapi_route's flag.
Signed-off-by: Hiroki Shirokura <slank.dev@gmail.com>
With this patch, zclient can intall seg6local rotues whem
they set properties nh_seg6local_{action,ctx} on struct nexthop
and set ZEBRA_FLAG_SEG6LOCAL_ROUTE on zapi_route's flag.
Signed-off-by: Hiroki Shirokura <slank.dev@gmail.com>
This includes community and large-community data.
```
exit1-debian-9# show ip route 172.16.16.1/32
Routing entry for 172.16.16.1/32
Known via "bgp", distance 20, metric 0, best
Last update 00:00:23 ago
* 192.168.0.2, via eth1, weight 1
AS-Path : 65030
Communities : 65001:1 65001:2 65001:3 65001:4 65001:5 65001:6
Large-Communities: 65001:123:1 65001:123:2
```
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
Description:
Added a new show command("show ip zebra route dump") to dump all routes
with detailed information including nexthops,flags, status ..etc.
This helps for dubugging and added to support_bundle_command.conf.
Defined this command as a hidden command.
Signed-off-by: Rajesh Girada <rgirada@vmware.com>
Add uptime for use with NHEs to keep track of how
long we have had this NHE in our rib without an update.
This is treated exactly the same as the re->uptime for
routes. When we get an update for a route, we reset the
uptime.
Signed-off-by: Stephen Worley <sworley@nvidia.com>
This one also needed a bit of shuffling around, but MTYPE_RE is the only
one left used across file boundaries now.
Signed-off-by: David Lamparter <equinox@diac24.net>
Add a control and api for the use of backup nexthops in
recursive resolution. With 'no', we won't try to use installed
backup nexthops when resolving a recursive route.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
VNI configuration is done without NB layer in default VRF. It leads to
the following problems:
```
vtysh -c "conf" -c "vni 1"
vtysh -c "conf" -c "vrf default" -c "no vni"
```
Second command does nothing, because the NB node is not created by the
first command.
```
vtysh -c "conf" -c "vrf default" -c "vni 1"
vtysh -c "conf" -c "no vni 1"
```
Second command doesn't delete the NB node created by the first command.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
We don't need to use the 'force' flag when processing the
resolve-via-default clis for ip and ipv6: we can just do normal
nht processing.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
The `show ip nht` and `show ipv6 nht` commands were broken.
This is because recent code commit: 0154d8ce45
assumed that p must not be NULL and this is not the case.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Add a bit of code to allow bgp to send the AS-Path associated with
the route being installed to zebra so it can be displayed and
used as part of the `show ip route A` command in zebra.
eva# show ip route 20.0.0.0/11
Routing entry for 20.0.0.0/11
Known via "bgp", distance 20, metric 0, best
Last update 00:00:00 ago
* 192.168.161.1, via enp39s0, weight 1
AS-Path: 60000 64539 15096 6939 8075
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
This is an optimization to reduce the number of L2 nexthops. A
l2 or fdb nexthop simply provides the dataplane with a nexthop ip-
torm-12:mgmt:~# ip nexthop
id 268435461 via 27.0.0.20 scope link fdb
id 268435463 via 27.0.0.20 scope link fdb
id 268435465 via 27.0.0.20 scope link fdb
So there is no need to allocate a nexthop per-ES/per-VTEP. There
can be 100+ ESs per-VTEP so this change cuts the scale down by a
factor of 100.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
When a local ES flaps there are two modes in which the local
MACs are failed over -
1. Fast failover - A backup NHG (ES-peer group) is programmed in the
dataplane per-access port. When a local ES flaps the MAC entries
are left unaltered i.e. pointing to the down access port. And the
dataplane redirects traffic destined to the oper-down access port
via the backup NHG.
2. Slow failover - This mode needs to be turned on to allow dataplanes
not capable of re-directing traffic. In this mode local MAC entries
on a down local ES are re-programmed to point to the ES-peers'
NHG. And vice-versa i.e. when the ES comes up the MAC entries
are re-programmed with the access port as dest.
Fast failover is on by default. Slow failover can be enabled via the
following config -
evpn mh redirect-off
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
The lookup for non default VRFs was always using a tableId; if not
provided, we were defaulting to RT_TABLE_MAIN. This is fine for the
default VRF but not for others. As a result, the command was silently
failing for non-default VRFs unless we also specified the correct tableId.
Fix this by only performing the lookup using the tableId if it is
provided; else use zebra_vrf_table.
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
The return from sockunion2hostprefix tells us if the conversion
succeeded or not. There are places in the code where we
always assume that it just `works`, since it can fail
notice and try to do the right thing.
Please note that failure of this function for most cases
of sockunion2hostprefix is highly highly unlikely as that
the sockunion was already created and tested elsewhere
it's just that this function can fail.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Add a command that allows FRR to know it's being used with
an underlying asic offload, from the linux kernel perspective.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The linux kernel is getting RTM_F_OFFLOAD_FAILED for kernel routes
that have failed to offload. Write the code
to receive these notifications from the linux kernel
and store that data for display about the routes.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
