Add if_vrf_lookup_by_index_next to get the next ifindex in a vrf
given the previous ifindex or 0 for the first.
Signed-off-by: Pat Ruddy <pat@voltanet.io>
Convert over to using the %pFX and %pRN modifiers
to output strings to allow us to consolidate on
one standard for printing prefixes.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The Solaris code has gone through a deprecation cycle. No-one
has said anything to us and worse of all we don't have any test
systems running Solaris to know if we are making changes that
are breaking on Solaris. Remove it from the system so
we can clean up a bit.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
If we have an interface configured in a daemon on shutdown
store the old ifindex value for retrieval on when it is
possibly recreated.
This is especially important for nexthop groups as that we
had at one point in time the ability to restore the
configuration but it was lost when we started deleting
all deleted interfaces. We need the nexthop group subsystem
to also mark that it has configured an interface.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Revert "zebra: support for macvlan interfaces"
This reverts commit bf69e212fd.
Revert "doc: add some documentation about bgp evpn netns support"
This reverts commit 89b97c33d7.
Revert "zebra: dynamically detect vxlan link interfaces in other netns"
This reverts commit de0ebb2540.
Revert "bgpd: sanity check when updating nexthop from bgp to zebra"
This reverts commit ee9633ed87.
Revert "lib, zebra: reuse and adapt ns_list walk functionality"
This reverts commit c4d466c830.
Revert "zebra: local mac entries populated in correct netnamespace"
This reverts commit 4042454891.
Revert "zebra: when parsing local entry against dad, retrieve config"
This reverts commit 3acc394bc5.
Revert "bgpd: evpn nexthop can be changed by default"
This reverts commit a2342a2412.
Revert "zebra: zvni_map_to_vlan() adaptation for all namespaces"
This reverts commit db81d18647.
Revert "zebra: add ns_id attribute to mac structure"
This reverts commit 388d5b438e.
Revert "zebra: bridge layer2 information records ns_id where bridge is"
This reverts commit b5b453a2d6.
Revert "zebra, lib: new API to get absolute netns val from relative netns val"
This reverts commit b6ebab34f6.
Revert "zebra, lib: store relative default ns id in each namespace"
This reverts commit 9d3555e06c.
Revert "zebra, lib: add an internal API to get relative default nsid in other ns"
This reverts commit 97c9e7533b.
Revert "zebra: map vxlan interface to bridge interface with correct ns id"
This reverts commit 7c990878f2.
Revert "zebra: fdb and neighbor table are read for all zns"
This reverts commit f8ed2c5420.
Revert "zebra: zvni_map_to_svi() adaptation for other network namespaces"
This reverts commit 2a9dccb647.
Revert "zebra: display interface slave type"
This reverts commit fc3141393a.
Revert "zebra: zvni_from_svi() adaptation for other network namespaces"
This reverts commit 6fe516bd4b.
Revert "zebra: importation of bgp evpn rt5 from vni with other netns"
This reverts commit 28254125d0.
Revert "lib, zebra: update interface name at netlink creation"
This reverts commit 1f7a68a2ff.
Signed-off-by: Pat Ruddy <pat@voltanet.io>
When using the default CLI mode, the northbound layer needs to create
a separate transaction to process each YANG-modeled command since
they are supposed to be applied immediately (there's no candidate
configuration nor the "commit" command like in the transactional
CLI). The problem is that configuration transactions have an overhead
associated to them, in big part because of the use of some heavy
libyang functions like `lyd_validate()` and `lyd_diff()`. As of
now this overhead is substantial and doesn't scale well when large
numbers of transactions need to be performed in sequence.
As an example, loading 50k prefix-lists using a single transaction
takes about 2 seconds on a modern CPU. Loading the same 50k
prefix-lists using 50k transactions can take more than an hour
to complete (which is unacceptable by any standard). To fix this
problem, some heavy optimization work needs to be done on libyang and
on the FRR northbound itself too (e.g. perform partial configuration
diffs whenever possible). This, however, should be a long term
effort since these optimizations shouldn't be trivial to implement
and we're far from having the performance numbers we need.
In the meanwhile, this commit introduces a simple but efficient
workaround to alleviate the issue. In short, a new back-off timer
was introduced in the CLI to monitor and detect when too many
YANG-modeled commands are being received at the same time. When
a certain threshold is reached (100 YANG-modeled commands within
one second), the northbound starts to group all subsequent commands
into a single large transaction, which allows them to be processed
much faster (e.g. seconds and not hours). It's essentially a
protection mechanism that creates dynamically-sized transactions
when necessary to prevent performance issues from happening. This
mechanism is enabled both when parsing configuration files and when
reading commands from a terminal.
The downside of this optimization is that, if several YANG-modeled
commands are grouped into the same transaction and at least one of
them fails, the whole transaction is rejected. This is undesirable
since users don't expect transactional behavior when that's not
enabled explicitly. To minimize this issue, the CLI will log all
commands that were rejected whenever that happens, to make the
user aware of what happened and have enough information to fix
the problem. Commands that fail due to parsing errors or CLI-level
validations in general are rejected separately.
Again, this proposed workaround is intended to be temporary. The
goal is to provided a quick fix to issues like #6658 while we work
on better long-term solutions.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
DEFPY_YANG will allow the CLI to identify which commands are
YANG-modeled or not before executing them. This is going to be
useful for the upcoming configuration back-off timer work that
needs to commit pending configuration changes before executing a
command that isn't YANG-modeled.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Remove mid-string line breaks, cf. workflow doc:
.. [#tool_style_conflicts] For example, lines over 80 characters are allowed
for text strings to make it possible to search the code for them: please
see `Linux kernel style (breaking long lines and strings)
<https://www.kernel.org/doc/html/v4.10/process/coding-style.html#breaking-long-lines-and-strings>`_
and `Issue #1794 <https://github.com/FRRouting/frr/issues/1794>`_.
Scripted commit, idempotent to running:
```
python3 tools/stringmangle.py --unwrap `git ls-files | egrep '\.[ch]$'`
```
Signed-off-by: David Lamparter <equinox@diac24.net>
All userdata pointers need to be rekeyed to their new xpaths, not just
the one associated with the dnode being moved.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
The northbound configuration callbacks should now print error
messages to the provided buffer (args->errmsg) instead of logging
them directly. This will allow the northbound layer to forward the
error messages to the northbound clients in addition to logging them.
NOTE: many callbacks are returning errors without providing any
error message. This needs to be fixed long term.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
in the CLI we state that the bandwidth of a link is
in Megabits per second, but when converting it to
Bytes per second for TE purposes we were treating
it as Kilobits. Fix the conversion error.
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
the interface name was not present in the hook in charge of updating the
interface context to the registered hook service. For that, update the
name before informing it.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Parameters should be const whenever possible to improve code
readability and remove the need to cast away the constness of
const arguments.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Having a fixed set of parameters for each northbound callback isn't a
good idea since it makes it difficult to add new parameters whenever
that becomes necessary, as several hundreds or thousands of existing
callbacks need to be updated accordingly.
To remediate this issue, this commit changes the signature of all
northbound callbacks to have a single parameter: a pointer to a
'nb_cb_x_args' structure (where x is different for each type
of callback). These structures encapsulate all real parameters
(both input and output) the callbacks need to have access to. And
adding a new parameter to a given callback is as simple as adding
a new field to the corresponding 'nb_cb_x_args' structure, without
needing to update any instance of that callback in any daemon.
This commit includes a .cocci semantic patch that can be used to
update old code to the new format automatically.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Replace sprintf with snprintf where straightforward to do so.
- sprintf's into local scope buffers of known size are replaced with the
equivalent snprintf call
- snprintf's into local scope buffers of known size that use the buffer
size expression now use sizeof(buffer)
- sprintf(buf + strlen(buf), ...) replaced with snprintf() into temp
buffer followed by strlcat
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Remove gcc 4.x workaround for variable size array as gcc
check moved to header file.
In lib/northbound.h : struct frr_yang_module_info made
size 1000 for gcc 4.x, where maximum 1000 nodes can fit.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
This fixes a theoretical bug that could occur when trying to change an
ifindex on an interface to that of an existing interface. We would
remove the interface from the ifindex tree, and change the ifindex, but
when we tried to reinsert the interface, the insert would fail. It was
impossible to know if this failed due to the insertion / deletion macros
capturing the result value of the underlying BSD tree macros. So we
would effectively delete the interface.
Instead of failing on insert, we just check if the prospective ifindex
already exists and return -1 if it does.
Macros have been changed to statement expressions so the result can be
checked, and bubbled up.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Old gcc versions (< 5.x) have a bug that prevents C99 flexible
arrays from working properly on shared libraries.
We already have a hack in place to work around this problem, but it
needs to be replicated in every declaration of a frr_yang_module_info
variable within libfrr. This clearly isn't a good solution if we
consider that many more libfrr YANG modules are about to come in
the future.
This commit introduces a different workaround that operates within
the northbound layer itself, such that implementers of libfrr YANG
modules won't need to worry about this problem anymore.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Add some additional output/debug to code to allow
us to see the vrf name instead of just the vrf id.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The previous workaround only works for -O0, at higher optimization
levels gcc reorders the statements in the file global scope which breaks
the asm statement :(.
Fixes: #4563Fixes: #5074
Signed-off-by: David Lamparter <equinox@diac24.net>
gcc 4.x does not properly support structs with variable length array
members. Specifically, for global variables, it completely ignores the
array, coming up with a size much smaller than what is correct. This is
broken for both sizeof() as well as ELF object size.
This breaks for frr_interface_info since this variable is in some cases
copy relocated by the linker. (The linker does this to make the address
of the variable a "constant" for the main program.) This copying uses
the ELF object size, thereby copying only the non-array part of the
struct.
Breakage ensues...
(This fix is a bit ugly, but it's limited to very old gcc, and it's
better than changing the array to "nodes[1000]" and wasting memory...)
Fixes: #4563Fixes: #5074
Signed-off-by: David Lamparter <equinox@diac24.net>
Cleanup the interface creation apis to make it more
clear what they are doing.
Make it explicit that the creation via name/ifindex will
only add it to the appropriate list.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
If the name has not been set yet (we were only passed the
ifindex in some cases like with master/slave timings) then
do not add/del it from the ifname rb tree on the vrf struct.
Doing so causes duplicate entries on the tree and infinte loops
can happen when iterating over it.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Current autocompletion works only for simple "vrf NAME" case.
This commit expands it also for the following cases:
- "nexthop-vrf NAME" in staticd
- usage of $varname in many daemons
All daemons are updated to use single varname "$vrf_name".
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
For all the places we have a zclient->interface_up convert
them to use the interface ifp_up callback instead.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Switch the zclient->interface_add functionality to have everyone
use the interface create callback in lib/if.c
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Start the conversion to allow zapi interface callbacks to be
controlled like vrf creation/destruction/change callbacks.
This will allow us to consolidate control into the interface.c
instead of having each daemon read the stream and react accordingly.
This will hopefully reduce a bunch of cut-n-paste stuff
Create 4 new callback functions that will be controlled by
lib/if.c
create -> A upper level protocol receives an interface creation event
The ifp is brand spanking newly created in the system.
up -> A upper level protocol receives a interface up event
This means the interface is up and ready to go.
down -> A upper level protocol receives a interface down
destroy -> A upper level protocol receives a destroy event
This means to delete the pointers associated with it.
At this point this is just boilerplate setup for future commits.
There is no new functionality.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
