When a new RP is configured, find all the (*, G) upstream whose
group belongs to the new RP and then update the upstream structure
with the below fields.
1. De-register for the old RP.
2. Set the upstream address as new RP
3. Register for the new RP.
4. Update the upstream rpf information and kernel multicast forwarding
cache(MFC), if the new RP is reachable.
Signed-off-by: Sarita Patra <saritap@vmware.com>
When route to RP gets modified, FRR receives a notification from
zebra, and call the function pim_resolve_upstream_nh() to compute the
nexthop and update upstream->rpf structure.
Issue: In case when RP becomes not reachable, FRR only uninstall
the mroute from the kernal, but not update the upstream->rpf structure.
Fix: When FRR receives a notification from zebra saying RP becomes
not reachable, then update the following fields.
1. update channel_oil incoming interface as MAXVIFS
2. Un-install the mroute from the kernel.
3. Switch upstream state from JOINED to NOTJOINED.
4. Clear the nexthop information of the upstream.
Signed-off-by: Sarita Patra <saritap@vmware.com>
When route to RP gets modified, FRR receives a notification from
zebra, and call the function pim_update_rp_nh() to compute the
new nexthop and will update the source_nexthop information of
rp_info. This is not working for the case when RP becomes not
reachable.
Fix: When FRR receives a notification from zebra saying RP becomes
not reachable, then delete the source_nexthop informatio of rp_info.
Signed-off-by: Sarita Patra <saritap@vmware.com>
In this commit, we are creating a dummy upstream & dummy channel_oil
for (*, G) when RP is not configured or not reachable.
Dummy upstream: <upstream_addr = INADDR_ANY, rpf = Unknown>
Dummy channel oil: <iif = MAXVIFS>
Signed-off-by: Sarita Patra <saritap@vmware.com>
When FRR receives IGMP/PIM (*, G) join and RP is not configured or not
reachable, then we are creating a dummy upstream with incoming interface
as NULL and upstream address as INADDR_ANY.
Added upstream address and incoming interface validation where it is necessary,
before doing any operation on the upstream.
Signed-off-by: Sarita Patra <saritap@vmware.com>
When FRR receives IGMP/PIM (*, G) join and RP is not configured or
not reachable, then we are creating a dummy upstream with incoming
interface as NULL.
Added some null checks for the incoming interface, while displaying
the pim upstream information in the cli command "show ip pim upstream".
Signed-off-by: Sarita Patra <saritap@vmware.com>
Added comments which explains the new values for existing fields
and new fields in the upstream and channel_oil data structure.
Following are the summary of the behaviour change in PIM code.
Scenario 1 : RP doesn’t exist/RP not reachable
Event: Join received
Current behaviour:
No upstream gets created
Changed behaviour:
Upstream data structure created with below info
upstream_addr: INADDR_ANY
channel_oil iif: MAXVIF
channel_oil is_valid: FALSE (flag introduced to indicate if this entry is valid to get installed in hardware)
RPF details: Not valid
Join state: NOT_JOINED
Kernal installed: FALSE
Scenario 2: Dummy upstream exists
Event: RP configured
Current Behaviour:
upstream address updated for the dummy upstream created.
Changed Behaviour:
upstream_addr: RP address
channel_oil iif: MAXVIF
channel_oil is_valid: FALSE
RPF details: only RP address updated
Join state: NOT_JOINED
Kernel installed: FALSE
Scenario 3: Dummy upstream exists
Event: RP becomes reachable
Current Behaviour:
Update channel oil, rpf details in the upstream and install in hardware
Changed Behaviour:
upstream_addr: RP Adress
channel_oil iif: MAXVIF
channel_oil is_valid: FALSE
RPF details: RPF details updated via NHT callback
Join state: JOINED
Kernel installed: TRUE
Scenario 4: MRoute exists
Event: RP gets deleted
Current behaviour:
Nothing got updated in him upstream and channel oil,
join timer still runs. Mroute still exists in kernel.
Changed behaviour:
upstream_addr: INADDR_ANY
channel_oil iif: MAXVIF
channel_oil is_valid: FALSE
RPF details: Not valid
Join state: NOT_JOINED (also sent prune towards deleted RPF nbr)
Kernel installed: FALSE
Scenario 5: MRoute Exists
Event: RP unreachable
Current behaviour:
Nothing got updated in him upstream and channel oil,
join timer still runs. Mroute sdeleted from kernel.
Changed behaviour:
upstream_addr: RP address
channel_oil iif: MAXVIF
channel_oil is_valid: FALSE
RPF details: only RP address updated
Join state: NOT_JOINED (also sent prune towards deleted RPF nbr)
Kernel installed: FALSE
Scenario 6: Mroute exists
Event: Better RP configured with precise group range & reachable.
Current behaviour:
No effect on existing route.
Changed behaviour:
Upstream address: Better RP
RPF interface: towards the better RP
Join state: JOINED (Send a prune towards the old RP and send a join
towards the better RP)
Scenario 7: Mroute exists
Event: RP deleted and another RP with broad group range fits this group & reachable
Current behaviour:
No effect on current behaviour
Changed behaviour:
Upstream address: next available RP
RPF interface: towards the next available RP
Join state: JOINED (Send a prune towards the old RP and send a join
towards the better RP)
Signed-off-by: Sarita Patra <saritap@vmware.com>
Add a test command to pim that allows you to reset the keepalive timer
for an upstream to it's max value. This is to allow purposeful testing
of cleanup code in pim, by forcing the keeaplive timer to expire later.
robot# show ip pim upstream
Iif Source Group State Uptime JoinTimer RSTimer KATimer RefCnt
enp3s0 192.168.201.136 225.1.0.0 NotJ,RegP 00:00:10 00:00:52 00:00:25 00:02:54 1
robot# show ip pim upstream
Iif Source Group State Uptime JoinTimer RSTimer KATimer RefCnt
enp3s0 192.168.201.136 225.1.0.0 NotJ,RegP 00:00:11 00:00:51 00:00:24 00:02:53 1
robot# test pim keep 192.168.201.136 225.1.0.0
Setting (192.168.201.136,225.1.0.0) to current keep alive time: 210
robot# show ip pim upstream
Iif Source Group State Uptime JoinTimer RSTimer KATimer RefCnt
enp3s0 192.168.201.136 225.1.0.0 NotJ,RegP 00:00:27 00:00:35 00:00:08 00:03:27 1
robot#
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Issue: Configure "ip pim rp x.x.x.x 225.0.0.0/4".
Show running config shows "ip pim rp x.x.x.x 224.0.0.0/4"
This is mis-leading.
Root-cause: Internally 225.0.0.0/4 is getting converted to
224.0.0.0/4 group mask, since the prefix length is 4.
Fix: Restrict the user to configure inconsistent group address
mask by throughing a cli error "Inconsistent address and mask".
Signed-off-by: Sarita Patra <saritap@vmware.com>
Issue: Shut the RP interface in the router RP. LHR will get to know
RP becomes not-reachable, so it send a prune towards the RP. On
receiving the prune, RP clear the (*, G) entry, but (S, G) should
not get removed if present.
Now no-shut the RP interface in the router RP. LHR will send a (*, G)
join towards the RP. On receiving join FRR create the (*, G) entry.
Along with this, it also add the interface(join received) in the OIL
of (S, G) and also refresh the (S, G) timer.
Fix: Dont refresh the timer for S, G or (*, G), if the flag for the
channel OIL is PIM_OIF_FLAG_PROTO_ANY.
Signed-off-by: Sarita Patra <saritap@vmware.com>
Add a command to track if an interface should be in active-active
mode or not. This command is hidden at this time because it
is not finished fully.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
- some target_CFLAGS that needed to include AM_CFLAGS didn't do so
- libyang/sysrepo/sqlite3/confd CFLAGS + LIBS weren't used at all
- consistently use $(FOO_CFLAGS) instead of @FOO_CFLAGS@
- 2 dependencies were missing for clippy
Signed-off-by: David Lamparter <equinox@diac24.net>
If you have an interface being added to a static mroute
and that interface has been configured w/ pim but does
not have a valid ip address yet, we do not create a
VIF for that device yet. As such when we attempt
to assign the vif array in the pim static data structure
we attempt to write into -1 of that array.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The pimg data structure is only used in one spot to send the default
vrf id to zebra upon startup. Add the default vrf id to the struct pim_router
data structure and remove the pimg pointer.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Create a `struct pim_router` and move the thread master into it.
Future commits will further move global varaibles into the pim_router
structure.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Just add the ability to notice the capabilities on startup,
but don't do anything with it yet.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When we receive a igmp report and attempt to initiate
a pim ifchannel for it and that fails to work then
let's back out the work done setting stuff up to this
point.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When we fail to add a local membership add some additional debugs
so that we can have a bit more information on when something goes
bad.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
It's been a year since we added the new optional parameters
to instantiation. Let's switch over to the new name.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When sending a sockoption for MRT_INIT, *bsd requires that
the data passed in must be 1. While linux does not, the
code was sending in a positive value that was causing issues
on *bsd of protocol not supported.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When trying to run PIM on *bsd, the kernel expects to only
allow the pim kernel socket to work if we elevate priviledges.
So do so.
This commit gets us further in the startup of PIM on *bsd
but is not sufficient to get it fully started yet.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Introduce frr-interface.yang, which defines a model for managing FRR
interfaces.
Update the 'frr_yang_module_info' array of all daemons that will
implement this module.
Add automatically generated stub callbacks in if.c. These callbacks will
be implemented in the following commit.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
FRR_DAEMON_INFO should now contain an array of 'frr_yang_module_info'
structures describing the YANG modules implemented by the daemon.
This array will be used by frr_init() function to load all YANG modules
and initialize the northbound callbacks during the daemon initialization.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Resolves issue with exit-vrf being placed at the end of zebra's portion
of a vrf block, but before other daemons' portions of the same config
block.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
The ->hash_cmp and linked list ->cmp functions were sometimes
being used interchangeably and this really is not a good
thing. So let's modify the hash_cmp function pointer to return
a boolean and convert everything to use the new syntax.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This commit fixes two issues during pim shutdown.
1) The rp_info structure was being freed before the
outgoing notifications that depended on it's information
was sent out as part of shutdown.
2) The pim->upstream_list shutdown involved iterating
over the list via ALL_LIST_ELEMENTS. This typically
is enough but pim will auto delete child nodes as well
as itself when it goes away and they depend on it. As such
the node and nnode could possibly already have been freed.
So change the way we look at all the data in the upstream_list
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Suppose we have a bridge with a host and two routers attached
to it.
r1 r2
| |
--------
|
host
host is sending traffic.
r1 and r2 are pim neighbors and r2 is the DR.
Both r1 and r2 will receive data from the stream up the pim
kernel socket. r1 will notice that it is not the DR and
stop processing in pim. This code adds a bit more code to blackhole
the route when r1 detects it is not the DR in this scenario.
This is being done because the kernel is both keeping state and
sending data to the pim process to continue processing this.
Additionally if we happen to be running this on a asic, then
blackholing the route in the asic can save a significant amount
of cpu time handling this situation.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When we decide we are not the right pim process to add upstream state
for the igmp state received, notice this in a debug to make life
easier to debug.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The tracking of who have drpriority on an interface
in pim was not displayed anywhere. Add to the show
command for future reference.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
In pim_if_new use bool instead of an int to pass
true/false values for what we should create the
pim interface type for.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The startup of a non-integrated config was not properly
allowing for startup to create the vif when we have
not learned about the interface we are trying to configure
at this point in time. Actually notice when we are
trying to create a pimreg device or not to properly
notice when to attempt to create the vif or not.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Allow at timer wheel creation time the ability to specify a
name for what we want the 'show thread cpu' to show up as.
Modify pim to note this.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
A new command "ip pim" is created to configure pim sm on an
interface, which replaces the existing commands "ip pim sm"
and "ip pim ssm" and make "ip pim sm" and "ip pim ssm" as
hidden commands. The command "ip multicast-routing" is removed
since it is already enabled on FRR by default.
Signed-off-by: Sarita Patra saritap@vmware.com
config.h (or, transitively, zebra.h) must be the first include file
listed for autoconf things like _GNU_SOURCE and _POSIX_C_SOURCE to work
correctly.
Signed-off-by: David Lamparter <equinox@diac24.net>
Since we're now building through one large Makefile, we can easily put
things with their daemons and crossreference nicely.
Signed-off-by: David Lamparter <equinox@diac24.net>
Problem reported that some bgp and ospf json commands did not return
any json output at all if the bgp/ospf instance did not exist.
Additionally, some bgp and ospf json commands did not return any json
output if the instance existed but no neighbors were defined. This
fix makes these commands more consistent in returning empty braces for
json output and issue a message if not using json output. Additionally,
made the flag "use_json" a bool to make it consistent since previously,
it had been defined as an int, char, u_char, and bool at various places.
Ticket: CM-21040
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
The Vrf aliases can be known with a specific hook. That hook will then,
from zebra propagate the information to the relevant zapi clients.
The registration hook function is the same for all daemons.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
End user was seeing this debug but we are not giving
the user enough information to debug this on his own.
Add a tiny bit of extra information that could point
the user to solving the problem for themselves.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When pimd is getting terminated, pim_upstream_del() gets called as
part of cleaning process. pim_upstream_del() deletes the route and
assigns NULL to the up->channel_oil. It also deletes each if_channel
by calling the function pim_ifchannel_delete().
pim_ifchannel_delete() internally calls the caller function pim_upstream_del(),
if it is the last ifchannel for that upstream. So pim_upstream_del
is getting called twice, which will access the up->channel_oil which
was already set to NULL before. This results in crash.
Fix:
pim_ifchannel_delete() should call pim_upstream_del (caller function)
only if the up->ref_count > 0. Added an assert(up->ref_count > 0) in
the function pim_upstream_del().
Signed-off-by: Sarita Patra <saritap@vmware.com>
e.g.
pimd/pim_oil.c: In function ‘pim_channel_oil_dump’:
pimd/pim_oil.c:51:19: error: ‘%d’ directive writing between 1 and 11 bytes into a region of size 10 [-Werror=format-overflow=]
Build on gcc-8.2.0 is warning-free after this patch.
Signed-off-by: David Lamparter <equinox@diac24.net>
While terminating pim instance, the memory allocated for pim nexthop
should be released before deallocating the memory of pim nexthop cache(pnc).
This resolves the memory leak detected in pnc->nexthop creation.
Signed-off-by: Sarita Patra <saritap@vmware.com>
* Use the correct license header
* Stop headers from including themselves
* Use uniform relative include conventions
* Ensure that sources include what they use
* Turn off clang-format around struct array blocks
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
The definition of the interface commands in vtysh.c were outdated.
Currently, all daemons that call if_cmd_init() will have the "no interface
IFNAME" command and the "[no] description" commands as well, so there's
no need to define exceptions for these commands anymore.
To fix this, make extract.pl parse the if.c file so that vtysh can get the
interface commands from there automatically. Only the "interface IFNAME
[vrf NAME]" must be kept in vtysh.c because it changes the vty node and
thus needs special treatment.
Finally, make pimd and pbrd display interface descriptions on "sh run"
when they are configured.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
There is no need to check for failure of a ALLOC call
as that any failure to do so will result in a assert
happening. So we can safely remove all of this code.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Don't show BFD commands with timers since it might confuse users
("show running-config" won't display timers in client daemons anymore),
but keep accepting this command from previous configurations.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
When BFD timers are configured, don't show it anymore in the daemon
side. This will help us migrate the timers command from daemons to
`bfdd`.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
pimd/pim_nht.c: In function ‘pim_ecmp_nexthop_search’:
pimd/pim_nht.c:523:17: error: ‘nbr’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
nexthop->nbr = nbr;
(on gcc 5.4.0; this is the only warning with that version.)
Signed-off-by: David Lamparter <equinox@diac24.net>
When calling route_map_finish, every place that we do we must
first set the deletion event to NULL, or we will create an infinite
loop, if we are using the delayed route-map application code.
As such we might as well just make the route_map_finish code
do this work, as that there is really no viable alternative here
and route_map_finish should only be called on shutdown.
This fixes an infinite loop in zebra on shutdown when there
are route-maps.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
On shutdown and cleaning up pim_upstream ensure that the
upstream_sg_wheel still exists to remove item from.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When shutting down, do not free oil information after
interface information since we use the data there to
do so.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
frr_fini and pim_free both call zprivs_terminate. There is
no need for pim_free to call this function.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
If `ip igmp query-max-response-time` is set move it to
display first as that this command has order dependencies
on `ip igmp query-interval`.
Ticket: CM-21598
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When there is a return at the end of a function, there
is no need for another one immediately after it.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The pim_socket_join_source function only ever calls
pim_igmp_join_source and pim_socket_join_source is only
called from 1 place. Skip the level of indirection.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Abstract the RPF change for upstream handling code so
that we do not have two copies of the code.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
After we have decided what has changed as part of a update
we need to send the j/p messages to our peers.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Packet sending in PIM is a two step process.
1) Gather data size of next G to be packed into a packet.
2) Write data
After 1 we need to ensure that the next G to pack will actually
fit in a packet. If it does not send what we've currently written
and start a new packet to send.
Because this was a 2 step process it is important to be consistent
in what you think you have packed -vs- what you think you should.
PIM has a bug where we were considering S,G RPT Prunes for a *,G
even when the *,G was being pruned. This lead to a situation where
we were figuring a write size of more data then what we actually wrote
into a packet. This would leave a 8 byte whole of 0's in the packet
due to the way we moved pointers around.
Fix the code so that we do not attempt to consider S,G rpt prunes
for a *,G prune when figuring out how much we should write in step 1.
Ticket: CM-21644
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When we receive a IGMP report on an interface, do not create upstream
state for that request, unless we are the DR for the incoming interface.
This will prevent a interface on a LAN segment from causing traffic
to flow to itself.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
In places where we do a pim_ecmp_nexthop_search, also
use pim_ecmp_nexthop_lookup instead of the single path
case of pim_nexthop_lookup.
This is in preparation of more serious surgery to fix
the weird api of pim_find_or_track_nexthop.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Both pim_ecmp_nexthop_lookup and pim_ecmp_fib_lookup_if_vif_index
pass the address in 2 times. Make function calls consistent
and just pass in the src once.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The pim_ecmp_fib_looikup_if_vif_index does practically
the same work as pim_ecmp_nexthop_lookup, refactor to
use that function so that we do not have more code
that must parse the results from zclient_lookup_nexthop.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When doing nexthop lookups do not permanently allocate
memory in zebra and pim to track the nexthop specified
on the cli.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When we are looking up a RPF with a ecmp path, there
are situations where we are failing to find a path change
because we were not considering the actual number of neighbors
we have available to us at the start of the loop.
Example:
Suppose 2 way ecmp with a neighbor on each path. We have
multiple upstreams that are strewn across both paths.
If we loose a pim neighbor on one of the paths we would
initiate a rescan of the upstreams. If the neighbor
we lost happened to be the last ecmp path we rescanned
we would not successfully find a new path and leave
the upstream stranded.
This code change looks at the number of available neighbors
that we have -vs- the number of paths we have and chooses
the smaller of the two for figuring out what to do.
There probably exist other failure scenarios as well that
I am missing here and quite frankly the current code muddies
the water between a RPF lookup failure -vs- a RPF lookup succeeded
and there are no paths. Further work is needed here imo.
Additionally this idea of a pim_ecmp_nexthop_lookup and
pim_ecmp_nexthop_search is bogus. They are the same function and
should be merged at some point in time.
Ticket: CM-21599
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
There is no reason that a IGMP src should need a upstream
pim neighbor when doing a RPF lookup.
Ticket: CM-21599
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Unless someone intentionally changes MCAST_ALL_ROUTERS ("224.0.0.2") with a
wrong IP, this should never fail, so the fix is using "(void)" at the left
of the function call, as an explicit way of indicating we discard the
return value on purpose.
Signed-off-by: F. Aragon <paco@voltanet.io>
Additional fix over d94023d85c (PR #2546)
Removed all pointer arithmetic used for the checks, while keeping same
coverage. I hope this removes the Coverity warning (If this don't fix it, I'll
make Coverity work with a fork and try there as many times as necessary)
Signed-off-by: F. Aragon <paco@voltanet.io>
Additional fix over 18e994a043 (PR #2457)
Previous correction was not enough for fixing the Coverity warning. Now we
ensure we don't overflow the buffer.
Signed-off-by: F. Aragon <paco@voltanet.io>
route_map_mark_updated has a `int del_later` variable
that is passed in but never used. Just remove it.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Fix a couple of problems in my 1st fix for PIM nexthops reachable via a
connected route:
Use NEXTHOP_TYPE_IPV4_IFINDEX instead of NEXTHOP_TYPE_IPV4 since we add an
IPv4 address to an already known ifindex.
Assign nexthop_tab[num_ifindex].protocol_distance and .route_metric before
incrementing num_ifindex.
Revert the default: to individual switch case statement conversion in
zclient_read_nexthop() as requested by donaldsharp in #2347
Signed-off-by: Martin Buck <mb-tmp-tvguho.pbz@gromit.dyndns.org>
These commands were being accepted in all vrf's and
affecting all vrf's behavior globally, since they were
global variables.
Modify the code to make these two commands work
on a per-vrf basis.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When sending a PIM join upwards on the RP-based tree, it may get dropped on
the last hop before the RP if the RP is reachable via a connected route
(i.e. there's no associated nexthop). pimd needs to put the nexthop IP
address into the PIM join payload and fails to do that if that route has a
nexthop of 0.0.0.0. So whenever we look up a route to determine the nexthop
or we receive a nexthop tracking update from Zebra, use the destination
address as the nexthop address for connected routes.
Fixes#2326.
Signed-off-by: Martin Buck <mb-tmp-tvguho.pbz@gromit.dyndns.org>
The assignment of sa with the usage of hash_get and hash_alloc_intern
can never fail. No need to look for a failure case.
Found by Coverity SA.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Cleanup the pim->rpf_hash after upstream cleanup is done
since upstream cleanup uses the rpf_hash to cleanup itself.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The pim_upstream_free command was leaving slag by
not deleting data associated with the upstream
data structure. Modify the code to explicitly free
all data associated with an upstream on a pim instance
deletion event. Additionally the end result is that
the pim_upstream_free command is not needed anymore
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When the underlying networking subsystem is fundamentally
changed via some system controls. If we have msdp running
there exists a possibility that we need to stop some running
timers to prevent a crash.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The interface itself knows if it is a vrf device or
not, so let's just use a check for that in the decision
if a interface is a loopback or not.
Additionally modify function to return a bool.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Adding to mtracebis querying with group address. Same change
to vtysh mtrace command. Support for querying (S,G) and (*,G)
state in mtrace router code. Further improvments to mtrace router
code with closer complience to IETF draft. More references in
comments to the draft. Man page has been updated accordingly.
Signed-off-by: Mladen Sablic <mladen.sablic@gmail.com>
The following types are nonstandard:
- u_char
- u_short
- u_int
- u_long
- u_int8_t
- u_int16_t
- u_int32_t
Replace them with the C99 standard types:
- uint8_t
- unsigned short
- unsigned int
- unsigned long
- uint8_t
- uint16_t
- uint32_t
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Mtrace router code has been fixed for the case where no PIM
interface exists towards the source and next-hop is returned.
fwd_ttl is set to one, for correct reporting of mcast ttl.
Also, NO_MULTICAST error is returned when there is no PIM.
And prev_hop is set to source, for case when connected to source,
to help termination of hop-by-hop queries.
Dependency of logging on PIM, when sending mtrace packet, has been
removed.
Signed-off-by: Mladen Sablic <mladen.sablic@gmail.com>
Can't take the address of members of packed structures due to potential for
alignment faults on some platforms.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
When the pim_nexthop_lookup fails, close the opened fd
as part of the failure condition.
Additionally pim_nexthop_lookup assumes that we've
actually already looked up a nexthop in the past.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
There is no need to look at all VRF's when we need to
reevaluate the source forward since the calling function
knows the vrf.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
We know the vrf that we are in when we need to initiate a
rescan of the rpf cache. So pass it in and use that information.
This should help the rescan at scale with several vrf's cutting
out a lot of unnecessary work.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Vty commands that link netns context to a vrf is requiring some
privileges. The change consists in retrieving the privileges at the
vrf_cmd_init() called by the relevant daemon. Then use it.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Feature of mtrace only IGMP sockets on pim sm and pim
ssm interfaces. Modifed IGMP socket creation and show
igmp interface command output.
Signed-off-by: Mladen Sablic <mladen.sablic@gmail.com>
The TODO file had become a dumping ground of changes made
to the protocol. That when we modified the underlying code
we would need to update the TODO file again due to it's nature.
There is no point in keeping the list of items that we've done
as that commit messages will indicate the new features. So
pull out all the Finished work and rework the Todo numbers
used.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The ZEBRA_FLAG_INTERNAL flag is used to signal to zebra that
the route being added, the nexthops for it can be recursively
resolved. This name keeps throwing me off when I read it
so let's rename to something that allows the developer to
understand what is going on.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This commit is the implementation of weak multicast traceroute.
It consists of IGMP module dealing with mtrace type IGMP messages
and client program mtrace/mtracebis for initiating mtrace queries.
Signed-off-by: Mladen Sablic <mladen.sablic@gmail.com>
