The previous change to assume() did address the coverity warning about
one direction of the shift in HASH_KEY, let's constrain the other in
HASH_SIZE as well.
To be fair, the hash table *will* break at 1G entries, but at that point
we have other problems RAM-wise. (Could bump the thing to 64-bit, but
then we need better item hash functions too on every single user.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Use oil_incoming_vif instead of oil_parent. I had
to go look this up as that I failed to remember that
the linux kernel calls this parent for some bizarre
reason.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
currently snmpwalk give results such :
BGP4V2-MIB::bgp4V2PeerRemoteAddrType.1.ipv6z.10.125.0.2 = INTEGER: ipv4(1)
BGP4V2-MIB::bgp4V2PeerRemoteAddrType.2.dns.253.0.1.37.0.0.0.0.0.0.0.0.0.0.0.3 = INTEGER: ipv6(2)
BGP4V2-MIB::bgp4V2PeerRemoteAddr.1.ipv6z.10.125.0.2 = Hex-STRING: 0A 7D 00 02
BGP4V2-MIB::bgp4V2PeerRemoteAddr.2.dns.253.0.1.37.0.0.0.0.0.0.0.0.0.0.0.3 = Hex-STRING: FD 00 01 25 00 00 00 00 00 00 00 00 00 00 00 03
the expected result is the following
BGP4V2-MIB::bgp4V2PeerRemoteAddrType.1.ipv4.10.125.0.2 = INTEGER: ipv4(1)
BGP4V2-MIB::bgp4V2PeerRemoteAddrType.1.ipv6.253.0.1.37.0.0.0.0.0.0.0.0.0.0.0.3 =
INTEGER: ipv6(2)
BGP4V2-MIB::bgp4V2PeerRemoteAddr.1.ipv4.10.125.0.2 = Hex-STRING: 0A 7D 00 02
BGP4V2-MIB::bgp4V2PeerRemoteAddr.1.ipv6.253.0.1.37.0.0.0.0.0.0.0.0.0.0.0.3 = Hex
-STRING: FD 00 01 25 00 00 00 00 00 00 00 00 00 00 00 03
in draft-ietf-idr-bgp4-mibv2-11
INDEX for Bgp4V2PeerEntry is define as follows
INDEX {
bgp4V2PeerInstance,
bgp4V2PeerRemoteAddrType,
bgp4V2PeerRemoteAddr
}
the peer instance is defined as follows
OBJECT bgp4V2PeerInstance
SYNTAX Unsigned32 (1..4294967295)
more this interpretation is conformant with the snmpwalk implementation
for instance we obtain the following result
swBgp.bgp4V2.bgp4V2Objects.bgp4V2PeerTable.bgp4V2PeerEntry.bgp4V2PeerRemotePort.1.ipv6.253.0.1.37.0.0.0.0.0.0.0.0.0.0.0.3 = Gauge32: 179
swBgp.bgp4V2.bgp4V2Objects.bgp4V2PeerTable.bgp4V2PeerEntry.bgp4V2PeerRemoteAs.1.ipv4.10.125.0.2 = Gauge32: 65200
since currently we are not supporting multi instance for bgp peer in
SNMP the bgp4V2PeerInstance value is set to 1 coforming to:
"Implementations that do not support multiple routing instances should return 1 for this object."
test is updated accordingly to fix.
currently index for bgp4V2NlriEntry is not coformant to MIB definition
Signed-off-by: Francois Dumontet <francois.dumontet@6wind.com>
currently an snmpwalk gives:
BGP4V2-MIB::bgp4V2PeerFsmEstablishedTime.1.ipv6z.10.125.0.2 = Gauge32: 103 seconds
BGP4V2-MIB::bgp4V2PeerFsmEstablishedTime.2.dns.253.0.1.37.0.0.0.0.0.0.0.0.0.0.0.3 = Gauge32: 103 seconds
but ipv6z and dns are not the valid address type this must be ipv4 and
ipv6.
Signed-off-by: Francois Dumontet <francois.dumontet@6wind.com>
snmpwalk exhibit the followinfg errors:
BGP4V2-MIB::bgp4V2PeerLastErrorReceivedTime.1.ipv6z.10.125.0.2 = Wrong Type (should be Timeticks): Gauge32: 0
BGP4V2-MIB::bgp4V2PeerLastErrorReceivedTime.2.dns.253.0.1.37.0.0.0.0.0.0.0.0.0.0.0.3 = Wrong Type (should be Timeticks): Hex-STRING: 00 00 00 00 00 00 00 00
BGP4V2-MIB::bgp4V2PeerLastErrorSentTime.1.ipv6z.10.125.0.2 = Wrong Type (should be Timeticks): Gauge32: 178
BGP4V2-MIB::bgp4V2PeerLastErrorSentTime.2.dns.253.0.1.37.0.0.0.0.0.0.0.0.0.0.0.3 = Wrong Type (should be Timeticks): Hex-STRING: B2 00 00 00 00 00 00 00
Error: OID not increasing: BGP4V2-MIB::bgp4V2NlriIndex.1.4.10.200."".0.24.10.125.0.2
>= BGP4V2-MIB::bgp4V2NlriIndex.1.4.10.200."".0.24."".0.0.0
draft-ietf-idr-bgp4-mibv2-11 states the following
bgp4V2PeerLastErrorReceivedTime OBJECT-TYPE
SYNTAX TimeStamp
bgp4V2PeerLastErrorSentTime OBJECT-TYPE
SYNTAX TimeStamp
we set the correct values
Signed-off-by: Francois Dumontet <francois.dumontet@6wind.com>
Add the ability to store a raw copy of the incoming BGP Link-State
attributes and to redistribute them as is to other routes.
New types of data BGP_ATTR_LS and BGP_ATTR_LS_DATA are defined.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
Use an external BGP injector tool in router r1. Check that bgpd on r2 is
able to decode BGP-LS prefixes and re-encode to the r3 instance.
Link: https://github.com/louis-6wind/bgp_injector
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Add the "show bgp link-state link-state" following commands:
> r3# show bgp link-state link-state ?
> <cr>
> all Display the entries for all address families
> detail-routes Display detailed version of all routes
> json JavaScript Object Notation
> neighbors Detailed information on TCP and BGP neighbor connections
> regexp Display routes matching the AS path regular expression
> summary Summary of BGP neighbor status
> version Display prefixes with matching version numbers
> wide Increase table width for longer prefixes
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Add the "bgp default link-state" command to the "router bgp" context.
> router bgp 65000
> bgp default link-state
When this command is set, the "link-state/link-state" AFI/SAFI is
activated on all neighbors that are directly specified within the
"router bgp" unless explicitly deactivated:
> router bgp 65000
> bgp default link-state
> neighbor 10.0.0.1 remote-as 65001
> address-family link-state link-state
> no neighbor 10.0.0.1 activate
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Link-state prefixes are only intended to be read for a link-state
consumer (i.e. a controler). They cannot be installed in Forwarding
Information Base (FIB).
Do not announce them to zebra.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
BGP link-state prefixes are displayed in the form of NLRI-TYPE /
Prefix-Length.
> r2# show bgp all
>
> For address family: Link State
> BGP table version is 8, local router ID is 192.0.2.2, vrf id 0
> Default local pref 100, local AS 65002
> Network Next Hop Metric LocPrf Weight Path
> *> Link/153 0 65001 i
> *> IPv6-Prefix/77 0 65001 i
> *> IPv4-Prefix/57 0 65001 i
> *> Node/49 0 65001 i
> *> Node/45 0 65001 i
Add a lib prefix display hook in bgpd to display properly all the details.
> r2# show bgp all
>
> For address family: Link State
> BGP table version is 8, local router ID is 192.0.2.2, vrf id 0
> Default local pref 100, local AS 65002
> Network Next Hop Metric LocPrf Weight Path
> *> Link OSPFv3 ID:0xffffffffffffffff {Local {AS:4294967295 ID:4294967295 Area:4294967295 Rtr:10.10.10.11:2.2.2.2} Remote {AS:4294967295 ID:4294967295 Area:4294967295 Rtr:10.10.10.10:1.1.1.1} IPv4:10.1.0.1 Neigh-IPv4:10.1.0.2 IPv6:2001::1 Neigh-IPv6:2001::2 MT:0,2}/153
> 0 65001 i
> *> IPv6-Prefix OSPFv3 ID:0x20 {Local {AS:65001 ID:0 Area:0 Rtr:10.10.10.10} MT:2 OSPF-Route-Type:1 IPv6:12:12::12:12/128}/77
> 0 65001 i
> *> IPv4-Prefix OSPFv2 ID:0x20 {Local {AS:65001 ID:0 Area:0 Rtr:10.10.10.10:1.1.1.1} IPv4:89.10.11.0/24}/57
> 0 65001 i
> *> Node OSPFv2 ID:0x20 {Local {AS:65001 ID:0 Area:0 Rtr:10.10.10.10:1.1.1.1}}/49
> 0 65001 i
> *> Node OSPFv2 ID:0x20 {Local {AS:65001 ID:0 Area:0 Rtr:10.10.10.10}}/45
> 0 65001 i
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
When displaying the link-state prefixes with "show bgp link-state
link-state" command, the following output headers are not needed:
> Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
> i internal, r RIB-failure, S Stale, R Removed
> Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
> Origin codes: i - IGP, e - EGP, ? - incomplete
> RPKI validation codes: V valid, I invalid, N Not found
Do not display these headers for link-state SAFI.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
BGP Link-State prefixes are special prefixes that contains a lot of
data.
Extend the length of the prefix string buffer in order to display
properly this type of prefixes with the next commits.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Add the ability to send link-state prefixes that are in the BGP table.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
Add the ability to store link-state prefixes in the BGP table.
Store a raw copy of the BGP link state NLRI TLVs as received in the
packet in 'p.u.prefix_linkstate.ptr'.
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
To show the TCP MSS value per neighbor you have to configure it, otherwise you
don't see the actual value.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
Add to the library the link-state type of prefixes.
Link-state prefixes contain much more data than the current prefixes and
they only make sense for BGP Link-State. Storing all the data in "struct
prefix" is not relevant because it would increase the memory usage of
all daemons. Instead a pointer to a structure that contains all the
information is used. Printing link-state prefixes can be delegated to a
hook function.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Accept the BGP Link-State AFI/SAFI capability when received from a peer
OPEN message.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
